Toolroom & Support Equipment Surplus to Baker Hughes ALS Multi-Location

Autoclave Pressure Vessel (Located in Claremore, OK)

Alcatel ASM 180T Helium leak detector: High performance helium leak detector, on wheels; 20 m3/h (15 cfm) rotary vane oil sealed mechanical roughing pump, for individual and varied tests of volumes up to 50 liters without auxiliary pumping;...

AS IS- Condition unknown - Model # CM - Serial # 50533-2 (Located in Claremore, OK)

Digital Readout for Mill – AS IS Condition Unknown - Model No 164-770 - Serial #o ARC-501W (Located in Claremore, OK)

Temp/Humidity digital chart - Works - Hygrothermograph - Extra Pens - Model #o THDX - Serial # 0527085 (Located in Claremore, OK)

5 pull out drawers and 1 flip open cabinet, 27"w x 18" d x 35" h (Located in Claremore, OK)

Machine is in operable condition with normal wear and tear. SN# 225774; Table size 9" x 49", approx 2400 lbs; 87" high, purchased June 1982 (located in Oklahoma City, OK)

Machine works with normal wear and tear. SN# LMS-2063; 460 V; 3Ph; 60 Hz; HP 3-1.75-1.5-.88; RPM 1710-1115-845-535 (located in Oklahoma City, OK)

Max Operating Temp = 550 degrees F; Forced convection, side to side air flow; Work Space Dimension: 36" x 36" x 60"; Outside Dimensions: 56" x 67" x 74: Approx Weight= 2440 Lbs. Includes Nickel Plated Carbon Steel S...

Includes chuck on pallet, Master Switch and breaker boxes; Swing: 40.18" Centers: 160; Spindle Bore: 3"; Power: 25 hp; 500 RPM; Weight: 18,000 lbs (located in Oklahoma City, OK)

SN# 70007; Swing Over Bed: 24"; Swing Over Cross Slide: 16"; Swing in Gap: 31"; Distance Between Centers: 60": Spindle Speeds: (12) 27 - 1205 RPM; Spindle Motor: 15HP; Spindle Bore: 3:; Bed Width: 16.25; OAD (approx): 12...

Model SBM-60-SD; SN# S905265 (located in Oklahoma City, OK)

(located in Oklahoma City, OK)

Granite has been crated for transport (located in Oklahoma City, OK)

106″ length of bed, 49.5″ distance between centers, 19″ swing over bed, 11″ swing over cross slide, 12.5″ dia chuck, 14.5″ bed width, 400v 3ph. (located in Oklahoma City, OK)

Includes motor, tank, and solvent. Recycles working solvent to always provide clean working solvent. 39" X 30" X 40" with lid closed, 70" with lid open. 120V, 60hz, 20A; Have Operator's Manual (located in Oklahoma City, ...

Includes control center and hydraulic controller, in working condition. Max Rated Work Diameter: 14"; Max Diametral Pitch, Steel: 3.5": Max Travel of Hob Carriage: 15"; Max Hob Diameter: 6-1/4"; Motor and Control: Equipp...

SN# 5757; 220V; 3 Phase; Self-contained machine. No tooling included. Dimensions 7' x 3' x 6'; Max Work Diameter: 16" (400 mm); Max Hob Diameter: 5" (127 mm); Hob Speed Range: 59 to 246 RPM; Feed Range: 0.0075 to 0.1125" per ...

(located in Oklahoma City, OK)

SN# 54246; Mfg June 2007; Refurbished 2024 & stored; All Items Palletized for Shipping: Blast Cabinet (60" x 60" x 72", 2600 lbs), Blast / Reclaim System (60" x 60" x 72", 2200 lbs) and Filter Cabinet (45&q...

Great for machining smaller parts, 1" to 8" diameter, 16" swing. Was not used for precision work. Decommissioned in 2018. 10' x 3' x 4'; 3000 Lbs; Mfg 1992 (located in Oklahoma City, OK)

SN# 240028; 220 / 440V; 3 Phase, 60Hz; 8 HP (located in Oklahoma City, OK)

Spindle Speed: 25-2000 RPM; Swing on Bed: 490 mm; Swing on Reciprocating Table: 260 mm; Chuck Capacity: 10-inch 3-jaw scroll chuck with a through-hole diameter of 54 mm and center-to-center distance of 800 mm; Anilam digital controller, cra...

Load capacity 1100 Lbs, Lift range (Bottom of drum) 0" - 19"; designed for 30-, 55- & 85-gallon drums (located in Oklahoma City, OK)

Counter height, high storage capacity drawers (located in Oklahoma City, OK)

Exterior dimensions of 22" H x 17" W x 17" D (559 mm H x 432 mm W x 432 mm D); Storage capacity of 4 gal (15 L) of flammable liquids; Portable size for use on workbenches; Fire-resistant, leak-tested design; Complies with OSH...

Nylon supports, lockable wheels, tow bar (located in Oklahoma City, OK)

Includes hydraulic unit; Max Diameter: 12"; Travel of Hob Slide: 15-5/8"; Max Hob Diameter: 4"; Hob Spindle Diameter: 1-1/4"; Hob Speeds: (8) 45 to 180 RPM; Work Spindle Taper in Nose: No. 12 B&S; Main Unit Dimension...

Used for splicing copper wire. Each unit includes wireless mini "Slimboard" keyboard, Control Cabinet and PC; 220V; 50/60Hz; 16A (Located in Claremore)

One cart has custom-made box on back. The second has a custom bumper and frame added. (Located in Claremore.)

TRISTAND pipe vise w/ integral folding legs, tool hangers and a base which overhangs the front legs for clear tool swing. Designed for pipe threading and fabrication, these tools deliver optimal efficiency. Plus more! (Located in Claremore,...

Milwaukee 6230 Heavy Duty Bandsaw 120V 60Hz 6A 0-350FPM (Located in Claremore, OK)

(Located in Claremore, OK)

(Located in Claremore, OK)

Picture 1: FIXED BASE Vintage Wilton Bullet Machinist Vise 101162 / 101163 4-1/2" Jaw Width; Picture 2: Machinist 5” Jaw Round Channel Vise 500N; Stationary Base; 5" Jaw Width; 8" Opening Capacity; 4.25" Throat; Pi...

Unknown working condition (Located in Claremore, OK)

(Located in Claremore, OK)

(Located in Claremore, OK)

Model #: 4KP88; SN#: L1/9/09-00007; 200 psi Max Op Pressure; 70.5" high; 24" diameter (Located in Claremore, OK)

(Located in Claremore, OK)

(Located in Claremore, OK)

Swing: 16 "; Center distance: 40, 60, and 80 "; Spindle bore: 3.18 "; Motor power: 7.5 HP; Spindle speed: 20 - 2,000 RPM; Chuck: 3-jaw, 10 "; Features: Digital variable speed drive, coolant system, halogen work light, an...

Table: Working Surface: 9” x 42″; X-Axis: 30″ Saddle Travel; Y-Axis: 12″ Ram Travel; Quill Travel (Z-Axis): 5″; Spindle: 3HP Motor, Variable Speed Drive (60-4500 RPM), R-8 Spindle; Ways: Hardened and ground box...

480V, 175psi, vertical tank (located in Oklahoma City, OK)

(located in Oklahoma City, OK)

SN# 12112313 Motor= 1/2HP, 3-speed 80, 120, 200 SFPM (located in Oklahoma City, OK)

(located in Oklahoma City, OK)

(located in Oklahoma City, OK)

Mfg Date 12/19/2014, 460V/30/60Hz; 19.2A; Largest Motor Current: 3.2A. Buyer responsible for decommissioning in coordination with Baker Hughes Artificial Lift Services. (located in Oklahoma City, OK)

40’ long 8” ID ½” wall.  Flanged both ends. Carbon steel. Pipe and stands only. (located in Oklahoma City, OK)

3/4 HP, 3450 RPM, 115/230V, 7/3.5A, 60Hz, Belt Speed 4500 FPM/PPM, Belt Size 2" x 48", Lot #2009.09 (Located in Oklahoma City, OK)