General Workshop

General Workshop

Workshop engineering equipment is essential for any workshop or manufacturing facility.

What is in the General Workshop category?

The General Workshop category includes all Balancing Equipment, Bead Blast - Shot Blast Machines, Broaching and Key Seating, Chemical and Surface Treatment, Compressors and Associated Equipment, Cranes - Over Head, Jib and mobile cranes, Drilling, Dust Extractors - Industrial Vacuum Cleaners, Forklift Trucks and Motorized Factory Vehicles, Generators, Grinding, Inspection Equipment, Machine Vices, Rotary Tables, Angle Plates, Dividing Heads, Ovens - Furnace - Heat Treatment – Autoclaves, Power hand Tools Electric and Pneumatic, Pumps, Motors, Actuators, Robots - Automated Parts Handling, Sawing, Broaching, Slotting, Shaping and Planing Machines, Testing Equipment - Electronic and Mechanical, Tooling, Transformers, Welding, Workshop Miscellaneous.

General Workshop equipment currently available

Filtering

(Showing 96 of 1181 items)
Search
Country
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
    (1) Steel Rack with Assorted Plastic Bins
    Dimensions Approx 1050mm x 400mm x 1800mm High
  •  site
  •  site
  •  site
  •  site
    1 Lot Hardinge/Schlenker Assorted Collets
    Including Plain, Serrated, Round, Hexagon & Square
  •  site
  •  site
    1 Lot Assorted Crawford M673 Multibore Style Collets
    Including Serrated, Plain, Hexagon, Round & Square
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
    Switzer Floor Standing Parts Washer, 240 Volt
    Internal Dimensions Approx 700mm x 500mm x 200mm with Single Shelf
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
    4 Steel Shelving units
    1,000mm Wide x 300mm Deep x 1,900mm High.
  •  site
  •  site
    Ash Technologies INSPEX HD 1080p Vesa High-definition Digital Microscope
    Zoom Range (with supplied Lens) 5D Lens – 2.5x - 122x. Camera Resolution HD 1080p, 1920 x 1080 at 50/60 Hz. Monitor Connections HDMI / DVI. Monitor Requirements HD Ready / Full HD (Recommended). Power 8 Watts. Dimensions 370mm x 120mm x 140...
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
    (1 Piece) RW TUV, 4-Tier Plastic Storage Systems for Hygienic Environments
    Light Weight, High Quality Plastic Shelving; Dimensions Approx 1500mm x 500mm x 1500mm High;
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
    (2) Analogue Bore Gauges
    Comprising: (1 Set) Bowers 3"-4" 3 Point Bore Gauge with (1) 3.50005" Setting Ring; (1) Mitutoyo 4"-5" Analogue 3 Point Bore Gauge
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
    1 Lot Assorted Precision Equipment
    Comprising: (1) Chesterman 107 Straight Edge, 900mm Long; (2) 450mm Long Engineer's Squares
  •  site
    1 Pair Oxford Large 'V' Blocks
    Dimensions Approx 200mm x 100mm x 140mm
  • Image not available
    Image not available
     site
    GANG BOX, 48" LEFT TO RIGHT X 24" FRONT TO BACK X 24" DEEP, W/ COMBI PUNCH
    GANG BOX, 48" LEFT TO RIGHT X 24" FRONT TO BACK X 24" DEEP, W/ COMBI PUNCH
  •  site
  •  site
  •  site
  •  site
  •  site
    1 Lot Hardinge/Schlenker Assorted Collets
    Including Plain, Serrated, Round, Hexagon & Square
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
    (1) Mobile Swarf Bin with Drain Tap
    Dimensions Approx 550mm x 750mm x 660mm High
  •  site
  •  site
    (1) Mobile Swarf Bin with Drain Tap
    Dimensions Approx 550mm x 750mm x 660mm High
  •  site
  •  site
    (2) 2-Door Steel Cupboards with Assorted Buffing Mops
    Large Quantity of Buffing Mops, Abrasives & Attachments;
  •  site
    ADDISON MCKEE POWERBEND PB42STCNC 2 STACK 5 AXIS CNC TUBE BENDER WITH BENDPRO G2 CONTROL (2007)
    Max Round Tube Diameter – Mild Steel – 42mm x 2mm Bend Arm (C-Axis). Driven By Servo Motor Hydraulic Clamp & Pressure Die CLR Min 25mm – Max 200mm. Max Tube Length Over Mandrel 3000mm. Max bend Angle 193°. Working Height 1040mm. Dimensions ...
  •  site
  •  site
  •  site
  •  site
  •  site
    Meddings M2 Bench Drill On Cast Iron Table With Record No.23 Bench Vice
    Table Dimension L1,270 x W630 x H935mm. Drill Speed Range 230-2,670rpm. Throat 175mm.
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
  •  site
    Linde E15 Electric Forklift Truck With Charger
    Capacity 1,500kg. Load Centre 500mm. Maximum Lifting Height 3,250mm. Closed Height 2,140mm. Rubber Tyres. Working Hours 9,868. S/No. CMH1324.
  •  site
  •  site
  •  site
  •  site
  •  site
    Unused Gritco Solar Blaster Cabinet With Extraction Unit/Hopper Units (2019)
    Internal Cabinet Dimension W600 x D600 x H600mm. Rotary Table Ø400mm. With Footswitch.
  •  site
  •  site
    ZOLLER smile 400 Presetter with Pilot 3.0 Software - 2016 YOM
    Weight 175kg Dimensions – L1700 x W560 x H1750mm Year of manufacture – 2016 Zspares A4 Laser Printer Metalwork Accessories Printer (Colour Laser) II A4 Calibration certificate and service report renewed in August 2022. Features: label print...
  •  site
  •  site
  •  site
  •  site
    1 Lot Inspection Pin Gauges
    Comprising: (1 Set) Imperial Pin Gauges to .500" & (1 Set) Imperial Pin Gauges to .250" (Pieces Missing)
  •  site
  •  site
  •  site
  •  site
    (2) Power Tools
    Comprising: (1) Bosch CSB 550 RET Drill, 240 Volt; (1) Draper 810 Watt Hammer Drill, 240 Volt

Manufacturers

Manufacturers that are normally found in this category are Acco, American, Blastec,Inc, Finnblast, Caldwell, Caterpillar, Cleveland Crane, Cummins, Demag, Fronius, Gietart, Kone, Lincoln, Miller, Oerlikon, Plymovent, Siemens, Street, Viking, Wheelabrator.

General Workshop Auction FAQs

I've won something! Now what?

Congratulations! Buyers will be notified by invoice if their bid has been successful.

Do I need to pay tax on the item?

That depends. Sales tax is payable at the prevailing rate on all goods purchased. For sales made out of the UK, VAT is charged on the hammer price, the buyer’s premium and any additional charges. However, if the goods leave the UK, the VAT can be refunded on the hammer price, please provide proof of export and we can look into this for you.

Can I remove the item (s) myself?

Yes, providing that you or your contractor can fulfil the following criteria:

  • Public Liability Insurance
  • Licensing
  • Suitable Method Statement
  • Risk Assessment
  • Permits to Work
  • Capability and Competence

We will happily grant you access to the site once we’ve approved all of the documentation required.