Range of Komatsu, Chin Fong and Aida Presses, Toshiba & Nissei Injection Moulding Equipment on behalf of Faltec Europe

Started: 20 September 2022 at 09:00 BST
Ended: 15 November 2022 at 15:00 GMT
Equipment Available Due to Business Reinvesting in New Machine Tools. Please See the Sale Information Section for Any Additional Fees That May Be Applicable Upon Purchasing an Item. NOTE: Vendor to Approve All Closing Bids Prior to Apex Final Invoicing.
  • site
    LOT 1
    Komatsu Dual Servo Model H2W200 Straightside Press
    Capacity 2,000kN. Rating Tonnage Point Up From Bottom Of Stroke 6mm. Bolster Dimension 2,150 x 850 x 180mm THK. Die Height 500mm. Slide Dimension 1,850 x 650mm. Stroke 250mm. Slide Adjustment 120mm. Stroke No. Max 50 S.P.M. S/No. 10221 (06...
    Sale has ended
  • site
    LOT 2
    Chin Fong GTX-200 Straight Side Double Crank Press With Tomac Tuc-600A Decoiler & PA Industries SRF-28-SP Feeder
    Capacity 200 Ton. Rating Tonnage Point Up From Bottom Of Stroke 6mm. Bolster Dimension 2,200 x 940mm. Slide Dimension 1,850 x 800mm. Stroke 250mm. Slide Adjustment 120mm. Die Height 500mm. Stroke No. 20-50 S.P.M. Main Motor 18.5 kW. S/No. B...
    Sale has ended
  • site
    LOT 3
    Chin Fong GTX-160 Straight Side Double Crank Press
    Capacity 160 Ton. Rating Tonnage Point Up From Bottom Of Stroke 6mm. Bolster Dimension 2,000 x 760mm. Slide Dimension 1,600 x 550mm. Stroke 200mm. Slide Adjustment 100mm. Die Height 450mm. Stroke No. 30-55 S.P.M. Main Motor 11 kW. S/No. B70...
    Sale has ended
  • site
    LOT 4
    Chin Fong GTX-160 Straight Side Double Crank Press
    Capacity 160 Ton. Rating Tonnage Point Up From Bottom Of Stroke 6mm. Bolster Dimension 2,000 x 760mm. Slide Dimension 1,600 x 550mm. Stroke 200mm. Slide Adjustment 100mm. Die Height 450mm. Stroke No. 30-55 S.P.M. Main Motor 11 kW. S/No. B70...
    Sale has ended
  • site
    LOT 5
    Toshiba IS220FB-10A 220 Ton Injection Moulding Machine With Inject Visor -VL Control
    S/No. 139908 (1991).
    Sale has ended
  • site
    LOT 6
    Toshiba IS350GS-19A 350 Ton Injection Moulding Machine With Inject Visor V10 Control
    Screw Ø60mm. Plate Dimension 1,020 x 1,020mm. Tie Bar Distance 730 x 730mm. Opening Stroke 1,000mm. Max Daylight 1,260mm. Injection Rate 313 cm 3/s. Motor 45kW. S/No. 401006 (1994).
    Sale has ended
  • site
    LOT 7
    Komatsu OBS 80-3 Gap Frame Press
    Capacity 80 Ton. No. Of Slide Stroke Per Minute 60. Slide Stroke 130mm. Die Height 330mm. Slide Adjustment 80mm. Slide Dimension 550 x 450mm. Bolster Dimension 1,200 x 600 x 100mm THK. S/No.12707 (1989).
    Sale has ended
  • site
    LOT 8
    Aida Model NC1-800E 'C' Frame Press With Siemens Simatic Control Panel
    Capacity 800kN. Bolster Dimension 1,200 x 600mm. Slide Dimension 540 x 460mm. Die Height 280mm. Slide 80mm. Slide Stock 160mm. Strokes Per Minute 40-75. Max Upper Die Weight 280kg. Main Motor 7.5kW. S/No. C0408-0551 (2008).
    Sale has ended
  • site
    LOT 9
    Aida Model NC1-800E 'C' Frame Press With Siemens Simatic Control Panel
    Capacity 800kN. Bolster Dimension 1,200 x 600mm. Slide Dimension 540 x 460mm. Die Height 280mm. Slide 80mm. Slide Stock 160mm. Strokes Per Minute 40-75. Max Upper Die Weight 280kg. Main Motor 7.5kW. S/No. C0408-0554 (2008).
    Sale has ended
  • site
    LOT 10
    Komatsu OBS 45-3 Gap Frame Press
    Capacity 45 Ton. No. Of Slide Stroke Per Minute 80. Slide Stroke 140mm. Die Height 270mm. Slide Adjustment 60mm. Slide Dimension 400 x 350mm. Bolster Dimension 1,200 x 450 x 90mm THK. S/No.14866 (1991).
    Sale has ended
  • site
    LOT 11
    Komatsu OBS 80-3 Gap Frame Press
    Capacity 80 Ton. No. Of Slide Stroke Per Minute 60. Slide Stroke 130mm. Die Height 330mm. Slide Adjustment 80mm. Slide Dimension 550 x 450mm. Bolster Dimension 1,200 x 600 x 100mm THK. S/No.12706 (1989).
    Sale has ended
  • site
    LOT 12
    Komatsu OBS 110-3 Gap Frame Press
    Capacity 110 Ton. No. Of Slide Stroke Per Minute 50. Slide Stroke 150mm. Die Height 330mm. Slide Adjustment 100mm. Slide Dimension 600 x 550mm. Bolster Dimension 1,200 x 700 x 140mm THK. S/No.11945 (1989).
    Sale has ended
  • site
    LOT 13
    Komatsu OBS 45-3 Gap Frame Press
    Capacity 45 Ton. No. Of Slide Stroke Per Minute 80. Slide Stroke 140mm. Die Height 270mm. Slide Adjustment 60mm. Slide Dimension 400 x 350mm. Bolster Dimension 1,200 x 450 x 90mm THK. S/No.13841 (1989).
    Sale has ended
  • site
    LOT 14
    Komatsu OBS 45-3 Gap Frame Press
    Capacity 45 Ton. No. Of Slide Stroke Per Minute 80. Slide Stroke 140mm. Die Height 270mm. Slide Adjustment 60mm. Slide Dimension 400 x 350mm. Bolster Dimension 1,200 x 450 x 90mm THK. S/No.14864 (1991).
    Sale has ended
  • site
    LOT 15
    Komatsu OBS 45-3 Gap Frame Press
    Capacity 45 Ton. No. Of Slide Stroke Per Minute 80. Slide Stroke 140mm. Die Height 270mm. Slide Adjustment 60mm. Slide Dimension 400 x 350mm. Bolster Dimension 1,200 x 450 x 90mm THK. S/No.14868 (1991).
    Sale has ended
  • site
    LOT 16
    Nissei P TD150-25ASE Vertical Injection Moulding Machine With NC8300 Control
    With Roller Track. S/No. T15J208 (1989).
    Sale has ended
  • site
    LOT 17
    Nissei P TC30-5ASE Vertical Injection Moulding Machine With NC-8000 F Control
    S/No. T03L039 (1991).
    Sale has ended
  • site
    LOT 18
    Nissei P TC30-5ASE Vertical Injection Moulding Machine With NC-8000 F Control
    S/No. T03L040 (1991).
    Sale has ended
  • site
    LOT 19
    Komatsu OBS 60-3 Gap Frame Press
    Capacity 60 Ton. No. Of Slide Stroke Per Minute 70. Slide Stroke 120mm. Die Height 270mm. Slide Adjustment 70mm. Slide Dimension 500 x 400mm. Bolster Dimension 1,200 x 550 x 110mm THK. S/No.13104 (1989).
    Sale has ended
  • site
    LOT 20
    Komatsu OBS 45-3 Gap Frame Press
    Capacity 45 Ton. No. Of Slide Stroke Per Minute 80. Slide Stroke 140mm. Die Height 270mm. Slide Adjustment 60mm. Slide Dimension 400 x 350mm. Bolster Dimension 1,200 x 450 x 90mm THK. S/No.14845 (1991).
    Sale has ended
  • site
    LOT 21
    Komatsu OBS 45-3 Gap Frame Press
    Capacity 45 Ton. No. Of Slide Stroke Per Minute 80. Slide Stroke 140mm. Die Height 270mm. Slide Adjustment 60mm. Slide Dimension 400 x 350mm. Bolster Dimension 1,200 x 450 x 90mm THK. S/No.13839 (1989).
    Sale has ended
  • site
    LOT 24
    Komatsu OBS 60-3 Gap Frame Press
    Capacity 60 Ton. No. Of Slide Stroke Per Minute 70. Slide Stroke 120mm. Die Height 270mm. Slide Adjustment 70mm. Slide Dimension 500 x 400mm. Bolster Dimension 1,200 x 550 x 110mm THK. S/No.13820 (1991).
    Sale has ended
  • site
    LOT 25
    Nissei P TD30--5ASE Injection Mould Machine
    S/No. T03L016 (1991).
    Sale has ended
  • site
    LOT 26
    Nissei P TD30--5ASE Injection Mould Machine
    S/No. T03L017 (1991).
    Sale has ended
  • site
    LOT 27
    Komatsu OBS 45-3 Gap Frame Press
    Capacity 45 Ton. No. Of Slide Stroke Per Minute 80. Slide Stroke 140mm. Die Height 270mm. Slide Adjustment 60mm. Slide Dimension 400 x 350mm. Bolster Dimension 1,200 x 450 x 90mm THK. S/No.14865 (1991).
    Sale has ended
  • site
    LOT 28
    Aida Model NC1-800E 'C' Frame Press With Siemens Simatic Control Panel
    Capacity 800kN. Bolster Dimension 1,200 x 600mm. Slide Dimension 540 x 460mm. Die Height 280mm. Slide 80mm. Slide Stock 160mm. Strokes Per Minute 40-75. Max Upper Die Weight 280kg. Main Motor 7.5kW. S/No. C0408-0553 (2008).
    Sale has ended
  • site
    LOT 29
    Komatsu OBS 45-3 Gap Frame Press
    Capacity 45 Ton. No. Of Slide Stroke Per Minute 80. Slide Stroke 140mm. Die Height 270mm. Slide Adjustment 60mm. Slide Dimension 400 x 350mm. Bolster Dimension 1,200 x 450 x 90mm THK. S/No.13838 (1989).
    Sale has ended
  • site
    LOT 30
    Aihogiken Dual 200 Milling/Sawing Machine
    (2007).
    Sale has ended
  • site
    LOT 31
    Dual Milling/Sawing Machine
    Sale has ended
  • site
    LOT 34
    Infeed Conveyor System
    Sale has ended
  • site
    LOT 35
    Outfeed Conveyor System
    Sale has ended
  • site
    LOT 36
    3D Stretch Bender
    Table Dimension 1,000 x 800mm.
    Sale has ended
  • site
    LOT 37
    Amano PIA-30M Dust Extraction Unit
    S/No. 31328.
    Sale has ended
  • site
    LOT 38
    Hashimoto Extraction Unit
    S/No. GKJ0032 (1998).
    Sale has ended
  • site
    LOT 39
    Amano PIA-30M Dust Extraction Unit
    Sale has ended
  • site
    LOT 40
    Dewalt Vertical Bandsaw
    Tilting Table Dimension 500 x 500mm. Throat 310mm.
    Sale has ended
  • site
    LOT 41
    Roll Forming Bed
    Sale has ended
  • site
    LOT 42
    SMC IDU22C1 Air Dryer
    Sale has ended
  • site
    LOT 43
    RMT Double 7 Tonne Pneumatic Presses On Steel Bench
    S/No. 7VSG/2177 (2001).
    Sale has ended
  • site
    LOT 52
    3D Stretch Bender
    Sale has ended
  • site
    LOT 53
    3D Medium Stretch Bender/Tilt Bed
    Sale has ended
  • site
    LOT 54
    3D Stretch Bender
    Sale has ended
  • site
    LOT 55
    F/M Central Control Panel
    Sale has ended
  • site
    LOT 56
    VS50 Extruder With Control Panel
    Sale has ended
  • site
    LOT 57
    Ikegal GS65 Extruder With Control Panel
    Sale has ended
  • site
    LOT 58
    Wire Tensioning Machine With Aimex PHM-60 Heater Box On Steel Fabricated Table
    Table Dimension L4,500 x W500 x H870mm.
    Sale has ended
  • site
    LOT 59
    Material Loader & Control Panel
    Sale has ended
  • site
    LOT 60
    Material Loader & Control Panel
    Sale has ended
  • site
    LOT 61
    Smog Hog Extraction Unit
    Sale has ended
  • site
    LOT 63
    Coolant Bath With Pump
    Sale has ended
  • site
    LOT 64
    Puller Unit With Conveyer & Safety Curtain
    Sale has ended
  • site
    LOT 65
    Cropper Unit With Conveyor
    Sale has ended
  • site
    LOT 66
    Mobile Conveyer
    Conveyor Dimensions 1,500 x 1,000mm.
    Sale has ended
  • site
    LOT 67
    Watson Marlow 313S Primer Jig
    Sale has ended
  • site
    LOT 68
    Orion RKL-2200V-C Chiller Unit
    Capacity 7.9/8.7kW. Weight 240kg. S/No. 1707010.
    Sale has ended
  • site
    LOT 69
    Cropper Unit With Conveyor
    Conveyor Length 4,100mm.
    Sale has ended
  • site
    LOT 70
    Aimex Mobile Conveyor
    Dimension L3,275 xW470mm.
    Sale has ended
  • site
    LOT 71
    Spot Welder Model YF-0201Z With Pana Tech Z Control
    Weld Power 200/400v. With Foot Switch. S/No. 6690 (1989).
    Sale has ended
  • site
    LOT 72
    Aihogiken Milling/Sawing Machine
    Weight 2,500kg. (2014).
    Sale has ended
  • site
    LOT 73
    3D Stretch Bender
    Sale has ended