G. & P. Precision Engineers (Notts) Ltd

With C & Y Axes. Driven Tools. 24 Position Turret. Tail Stock. Tool Setter. Parts Catcher. 250mm 3 Jaw Chuck. Collet Chuck & Collets. S/No ML0105-000627

Main Table 1300mm x 630mm. Traverses: X = 1100mm. Y = 550mm. Z = 600mm. ATC Capacity 20 Tools. Spindle Nose BT40. S/No 11204035

Main Table 660mm x 355mm. Traverses: X = 508mm. Y = 406mm. Z = 508mm. ATC Capacity 20 Tools. Spindle Nose BT40. S/No 9636 - 1997

Main Table 660mm x 355mm. Traverses: X = 508mm. Y = 406mm. Z = 508mm. ATC Capacity 20 Tools. Spindle Nose BT40. S/No 10892 - 1997

Swing over Bed 555mm Dia x 1000mm B.C. Swing in Gap 780mm. Swing over Cross Slide 350mm. S/No SLG00040

Main Table 910mm x 410mm. Traverses: X = 765mm. Y = 405mm. Z = 710mm. ATC Capacity 21 Tools. Spindle Nose BT40. S/No 9401479

Main Table Approx 875mm x 410mm. Traverses: X = 765mm. Y = 405mm. Z = 508mm. ATC Capacity 21 Tools. Spindle Nose BT40. S/No 9410132 - 1995

With Duplomatic 8 Station Turret. Swing over Bed 400mm Dia x 1250mm B.C. Swing in Gap 585mm. Swing over Cross Slide 246mm. S/No N71016

Swing over Bed 480mm Dia x 1250mm B.C. Swing in Gap 700mm. Swing over Cross Slide 257mm. S/No L100

Swing over Bed 380mm Dia x 750mm B.C. Swing over Cross Slide 240mm. S/No 8806302 - 1999

Max Dia Swing 450mm x 1150mm B.C. Speeds 15 - 2500 RPM. S/No 324 - 1998

Table 1270mm x 254mm. Spindle Nose R8. Spindle Speeds 60 to 4200RPM. S/No 11728

Table 1270mm x 254mm. Spindle Nose R8. Spindle Speeds 60 to 4200RPM. S/No 7553

Table 1270mm x 254mm. Spindle Nose R8. Spindle Speeds 60 to 4200RPM. S/No 8686

With 12 Station Turret. Tailstock. Max Dia Swing 460mm. Max Turning Diameter 205mm. Max Turning Length 205mm. Max Distance Between Centres 520mm. S/No M10281 - 1997

With 12 Station Turret. Tailstock. Approx Max Turning Diameter 300mm. Max Turning Length 500mm. S/No 040155

With 12 Station Turret. Tailstock. Max Diameter Swing 380mm. Max Turning Dia 300mm. Distance B.C Approx 500mm. S/No 6658 - 1995

Suitable for Lots 3 & 4. Centre Height Approx 150mm. With 200mm Dia 3 Jaw Chuck. S/No 243294

Suitable for Lot 7. Centre Height Approx 165mm. With 160mm Dia 3 Jaw Chuck.

Fitted with Knuckle Type Double Swivel Milling Head. Spindle Nose 40 Int. Table 2000mm x 455mm. Power Feeds.

Granite Table Size 757mm x 565mm. Distance from Table to Underside of Head Approx 500mm. Fitted with Renishaw Probe. With PC & Monitor. S/No 042645-33-32601

Screen Approx 310mm Dia. S/No 010149

Range Approx 500mm. S/No 6234

Table 1066mm x 228mm. Spindle Nose R8. Spindle Speeds 60 to 4200RPM. Power Feed to Table. S/No 9867

Table 1066mm x 228mm. Spindle Nose R8. Power Feed to Table. S/No 477891289Y

Table 1066mm x 228mm. Spindle Nose R8. Spindle Speeds 60 to 4200RPM. No Power Feed to Table. S/No 9868

Swing over Bed 400mm x 1250mm B.C. Swing in Gap 585mm. Swing over Cross Slide 246mm. Speeds Variable 13 to 2500RPM. S/No LVT50GMR JA/04400

Swing over Bed 500mm x 1000mm B.C. Speeds 22.4 to 2000RPM. S/No 050100800084

Capacity 254mm x 686mm B.C. (10" x 27") Single Swivel Wheel & Work Head. With Internal Spindle. S/No 1713 66

Capacity 203mm Dia Swing x 457mm B.C. (8” x 18"). With Internal Grinding Spindle. Single Swivel Wheel & Work Head. S/No 65355

Capacity 610mm x 203mm (24” x 8”) With 600mm x 200mm Magnetic Chuck. With Power Rise & Fall to Wheel Head. S/No BO 92092

Capacity 457mm x 152mm (18" x 6") With 457mm x 152mm Magnetic Chuck. With Power Rise & Fall to Wheel Head. S/No BO 15882

Capacity 457mm x 152mm (18" x 6") With 450mm x 150mm Magnetic Chuck. S/No BO 93508

Capacity 915mm x 304mm. With 915mm x 304mm Magnetic Chuck. S/No 3031

Table 1066mm x 228mm. With Power Feed to Table. Spindle Nose R8.

Table 1066mm x 228mm. Spindle Nose R8. S/No 465760389Y

Swing over Bed 330mm x 635mm B.C. Swing in Gap 480mm. Swing over Cross Slide 210mm. Speeds 58 to 2500 RPM. S/No M314724

Swing over Bed 280mm x 500mm B.C. With 125mm Dia 3 Jaw Chuck. Collet Attachment. Fixed & Travelling Steadies.

Fitted with Stahl ST10 1000kg Electric Chain Hoist. Pendant Operated. Power Cross Traverse Approx Dimensions - Overall Height 2.85M x 3M Span. S/No C28130-01 - 2004. Untested.

Tank Area Approx 905mm x 700mm x 440mm Deep. Throat Depth Approx 600mm. S/No 2080

Manual Clamping with Capacity for 225mm diameter. S/No 96588

Table Size, Throat size 457mm S/No 7677

Sander Belt 100 x 230mm with table size 140 x 230mm

S/No 8607/1

Table Size 1117 x 395 with RPM 1465/975/720/470 - S/No 66823.F25, S/No 67773.F18, S/No 66823.F47, S/No 67772.F24

Table size 760 x 430mm with J6 Drill Chuck capacity 0 - 13mm diameter, The table is a floating table and can be moved to any position. Manufactured in 1908

Sander Belt width 150mm with table size 204 x 340mm

Table size 470 x 265mm and 10 AMPS, S/No 2368

Table size 305 x 305mm MT2 Spindle, JT3 Chuck 3 - 16mm diameter, Table movement vertical travel 690mm

Two Tables 305 x 170

Approximate size 690 x 200mm with 65mm depth on the fixed jaw of the vice

Approximate size 690 x 200mm with 65mm depth on the fixed jaw of the vice

Size 455 x 310 x 225mm

Maximum Lifting Capacity 1000Kg S/No 3493813

Set of Internal / External Jaws

Clarkson AutoLock Chucks/AutoLock Spanners/TitLock Milling Chucks/Spindle 40 Taper Face Mill Holders/Spindle 40 Taper Boring Bar Holders/ Clarkson Collets/Ring - Open Spanners

Jones & Shipman BT40 Collet Holder/R8 Face mill Holders/R8 Drill Chucks/R8 Collets/Spindle Taper Cleaning Tools. 

Used on LOT 20

R8 Collets for Bridgeport in wooden box-set NOT complete/R8 Side and Face Mill Holders

Size 305 x 225 x 255mm

Size 310 x 260 x 230mm

Manual Rotary Table Diameter 385mm with 1 degree increment, also fine adjustment with a Vernier scale at 1 minute

Size 320 x 180 x 150mm. NOTE: Box Plate Not Included.

Size 420 x 150 with 50mm depth on the fixed jaw

127mm Universal dividing head complete with tailstock , plates and a 160mm diameter 3 jaw chuck

R8 Collects from 2mm diameter to 20mm diameter

Various High Speed Steel Boring Bar Cutters

Various High Speed Steel 12.7mm Dia Shank Stub Drills

Clarkson Autolock/High Speed Steel Counter Bore/Back Chamfer/Form Cutters/Ball Nose/Tee cutters/Slot drills

Clarkson AutoLock Chucks/R8 Clarkson Holders/R8 Drill Chucks and Autolock Spanners. R8 Collets Not Included.

Various Boring Bars in wooden box

Three machine vices fixed to base plate 815 x 355mm, Approx. machine vice size 250 x 100mm with 50mm depth on the fixed jaw

Approx. size 280 x 150mm with 50mm depth on the fixed jaw

Size 560 x 200mm with 60mm depth on the fixed jaw

Size 430 x 155mm with 50mm depth on the fixed jaw

Size 430 x 155mm

Various work holding clamps / studs and washers

Manual Rotary Table Diameter 260mm

2 off 9” x 9” x 9” 2 off 12” x 8” x 9” 1 off 12” x 9” x 9”

Size 230 x 180 x 155mm

Various Size Angle Plates

Size 420 x 180mm with 50mm depth on the fixed jaw

Size 420 x 150mm with 50mm depth on the fixed jaw

Various machine vices

Table size 205 x 155mm with two Tee slots, Base plate size 205 x 135mm

Serial Number 0632959

Size 400 x 165mm with 50mm depth on fixed jaw / Size 200 x 65mm with 30mm depth on fixed jaw / size 290 x 105mm with 40mm depth on fixed jaw

Table size 305 x 155mm

Size 480 x 160mm with 50mm depth on fixed jaw

Size 460 x 305mm

Size 280 x 180mm

Rohm 110 HVL MK5 Revolving Centre

Various Morse Taper Sleeves / Morse Taper Drill Chucks with 1-16mm capacity

Selection of used Boring tools 20 x 20mm / 25 x 25mm, Selection of High Speed Steel Form Tools

Various selection of lathe turning tools

Reconditioned to Grade "A" - 1977 / Table size 610 x 460 x 100mm S/No 286

Size : Morse Taper No.5

Jacob drill chucks with box set of various centre drills

Selection of lathe tool holders to suit 25 - 30 mm square tool, These Holders are used with LOT 8

Selection of lathe tool holders B2 - 30 -20, These Holders are used with LOT 8

Various selection of carbide lathe turning tools

Used with LOT 8

Various selection of revolving centres

Various selection of revolving centres

Size 500 x 155mm with 50mm depth on fixed jaw

Diameter 181 - 184mm Face Mill part number TTM1674 - TTM1685, attached to 40 taper spindle tool holder / Face Mill location diameter 32mm

Various selection of Slot Drills with Extension Holders all cutters High Speed Steel

Various selection of end mills / slot drills / Tee cutters and Ball Nose Cutters all High Speed Steel

Various selection long series slot drills / Centre Drills / Tee cutters / Ball Nose Cutters and Reamers all High Speed Steel

Selection of Box Spanners / Open Ended Spanners and Ring Spanners

Cupboard size with sleeves 1010 x 460 x 900mm and metal work bench with small vice, Bench size 1150 x 640 x 920mm

Selection of Spindle BT40 Tool Holders, all holders are collect holders

BT40 dia 30mm side lock / BT40 dia 25mm side lock / BT40 dia 16mm side lock / BT40 Face Mill Holder and side lock holders with HSS Drills

Various Selection of CNC Pull Studs

Various Selection of ER32 Collets

Box Set 2 Parallels size 255 x 45 x 23mm, S/No E.I.D 80/138

Box Set 2 Square Parallels size 205 x 155 x 50mm, I.D No. 281/69/2

Box Set 2 Square Parallels size 205 x 155 x 50mm, I.D No. 281/69/2

Box Set 2 Square Parallels size 205 x 155 x 50mm, I.D No. 281/69/2

Size 230 x 170 x 75mm, S/No BFD 15074

Size 460 x 460 x 105mm

Size 460 x 460 x 105mm, S/No 288

Size 1610 x 100 x 100mm

Size 615 x 460 x 80mm

Box Set Parallels size 305 x 76 x 38mm, S/No B.I.D 80/201

Box Set Parallels size 305 x 76 x 38mm, S/No B.I.D 80/201, Box damaged and no lid to the box

Box Set Parallels size 152 x 25 x 3mm in Red Box

Box Set Parallels size 153 x 32 x 13mm in Black Box

Various size parallels 320 x 83 x 28mm / 118 x 20 x 12mm / 152 x 25 x 12mm with I.D No. E.I.D 80/241 / 150 x 25 x 13.0mm I.D No. 2950

Archer type 1222 Collets / Roxer Terox B3-10 Holder in box

BT40 dia 16mm side lock / BT40 face mill holders / BT40 Morse Taper Holder / ANSI-DIN dia 22mm face mill holder

BT40 type C32-90 Milling Chucks / BT40 Morse Taper Holders / BT40 Side Lock Holders

Various BT40 Morse Taper Holders with Pull Studs

BT40 Tapping Attachments / BT40 Collet Holders

BT40 Holders / BT40 Extended Holders

Various BT40 ER Collet Holders

Various work holding clamps / studs and washers / Tee Nuts / Cap Head Screws and Packers

BT40 PCM Boring bar Attachments

BT40 Boring Attachment with various boring bars complete with protective case

Various diameter range of Carbide Cutters

Diameter 250 x 13mm Side & Face Mill / Various Slitting Saws / BT40 Holder with diameter 280mm Boring Bar

Various BT40 Side Lock Holders with carbide insert milling cutters / BT40 Integral carbide insert tool

Various BT40 Face Mill Holders with Face Mills - Inserts Button / 45 / 90 degree approach inserts /diameters 32 / 50 and 80mm

Various "C" Spanners with ER Collet Spanners

Selection of Tapmatic Units

Clarkson AutoLock Cutters/Selection of Face Mills / High Speed Slab Mills / High Speed Slot / End Mills / Selection of Carbide Insert Tools / BT40 Boring Holders

Selection of Face Mills with Holders / Diameter face mills 63 / 125 / 160mm mixed 45 and 90 degree approach inserts

1 Box of High Speed Slot and End Mills

1 Box of High Speed End Mills

1 Box of High Speed Slot and End Mills

1 Box of High Speed Slot and End Mills

1 Box of High Speed Slot and End Mills

1 Box of High Speed Slot and End Mills

Various sizes of G Clamps

Selection of Face Mills diameter range from 50 to 80mm, Selection of carbide inserted cutters

Various Side Lock Holders with Carbide Chamfer Tools

Milling Head Attachment with various "C" Spanners and Drill Chucks

Various Box Sets of O - Rings, Circlips, Hose Clips

Step Blocks size 80 x 70 x 52mm

Various Parallels size 280 x 95 x 30mm and 205 x 50 x 25mm

Parallels size 280 x 56 x 30 / 120 x 38 x 22 / Parallel in box size 150 x 20 x 10 / Various Vee Blocks

Type T500/1 and Type T500/2

Various Parallels Square 205 x 150 x 50mm / 100 x 75 x 50mm and 2 off parallel at 123 x 38 x 18mm

Used to check Radial / Axial Runout

Table Size 605 x 400 x 110mm

Base size 460 x 200 and throat depth 330mm

Capacity 355mm diameter, 110 volt

Various Number / Letter Punch Stamps

Various Number / Letter Punch Stamps

4 Off 300mm diameter

5 Off 170mm diameter

Various diameters

Diamond Wheel Diameter 290mm

1000Kg A Frame Lifting Gantry on Castors with Winch

Assorted Soild Shank Tooling, Hss End Mills , Woodruff Cutters Reamers, Slot Drills, Rippers, Ball Nose, Thread Mills

Boring bars, Part-off tooling, Grove Tooling

Tool Holders and Drill Chucks

2 Jaw Chuck will fit Tongtai Lathe

Will fit Tongtai Lathe

Various Collet Sizes

2 x 3 Jaw Chucks & 2 x Spare Jaws

4 x Knurling Tools & Assorted Inserts

Assortment of Tool Holders To Fit Spinner Lathe

Assortment of Tool Holders & Jaws

Assortment of Tool Holders

Multibore Collets and Tool Holders to fit Doosan Puma

Tool Holders to fit Puma, Part Off Tool, Turning Tools

90 deg Indexable Face Mill Kit

Boring Bars, Threading Tools

Assortment of Turning Tools

Small Collet Chucks & Jaws

Selection of Groving Tools

Assortment of Collets, 3 x Blade Part Off Holders

Assortment of Collets Various Sizes & Collet Chucks

Blade Reamers, Tool Holders, Selection of Broaching Tooling

7-Draw Trolley Tooling Cabinet on Castors

NOTE: Not Available until Monday 24 July 2017.

Various Rough & Smooth Mutibore Collets

3 Pin Chuck

Tool Holders for Tongtai Lathe & Jaws

Tool Holders for Tongtai

Various Diameters and Cutting Withs

Chemical Parts Washer

Large Quainty of Stackable Storage Bins

Rumbler Machine & Polishing Stones

2 x Large Steel Billet Bins

2 x Large Steel Billet Bins

Medium Steel Bins

Large Steel Bins

Selection of Collets & 5 inc 3 Pin Chuck

3 x Lightweight Work Benches

2 x Granite Table. Not A grade

Work Bench Station with Hand Vice

Work Bench Station with Hand Vice

Work Bench Station with Hand Vice

Would go with Doosan Puma

Would fit with Tongtai Lathe

Would fit with Spinner Lathe

Would fit with Yang Lathe

Large work bench with 2 x hand Vices