The University of Sheffield AMRC Training Centre - Toolroom Machinery, Workshop & Canteen Equipment Sale
Starts: 23 September 2025 at 13:00 BST
Ends: 21 October 2025 at 15:00 BST
Surplus to requirements of ongoing business, featuring toolroom machinery, workshop and canteen equipment. Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 14 of 14 lots
- LOT 1
![site]()
Z3040X13A Radial Arm Drill
Bed Dimension 1,200 x 655mm. 'T' Slotted Box Table Dimension 495 x 340 x 300mm. Maximum Drilling Ø40mm. Distance From Spindle Nose To Table Surface 360-1,300mm. Distance Between Spindle Axis & Column Surface 260-1,200mm. Spindle Travel 200mm. Spindle Taper MT4. Spindle Speed Range (9) 38-900rpm(3kW Motor). Spindle Feeding Range (3) 0.10-0.22mm/rev. Rocker Rotary Angle ±180°. Elevation Motor 2.2kW. S/No. 1507401 (2015). - LOT 2
![site]()
Chester Chieftain 1660 Gap Bed Geared Head Centre Lathe With Quark DRO
Ø250mm 3 Jaw Chuck. Maximum Swing Over Bed Ø425mm. Maximum Swing Over Cross Slide Ø250mm. Maximum Swing Over Gap Ø640 x 310mm. Centre Height 210mm. Distance Between Centres 1,500mm. Spindle Bore Ø80mm. Speed Range 25-1,800rpm (5.6kW Motor). Spindle Nose Camlock D1-8. Cross Slide Travel 275mm. Compound Slide Travel 140mm. Tailstock Quill Travel 125mm, Quill Ø75mm, Taper MT4. S/No. 1370347 (2015). - LOT 3
![site]()
Odin X6330 Turret Milling Machine With Sino SDS6-3V 3 Axis DRO
Table Dimension 1370 x 305mm. Longitudinal Travel 870mm. Cross Travel 380mm. Vertical Travel 400mm. 'T'-Slot No. & Dimension 3×16mm. Ram Travel 500mm. Distance From Spindle Nose To Table Surface 0-350mm. Spindle Taper NT40. Spindle Travel 127mm. Spindle Speed Range 66-4,540rpm (3.75kW Motor). Auto Quill Feed 0.04/0.08/0.15mm/rev. Head Swivel 90°. Head Tilting 45°. S/No. 151104 (2015). - LOT 4
![site]()
Electrolux NHT8G Pass Through Dish Washer
Capacity In ETL Sanitation Mode 63 Racks, 1134 Dishes/Hr, Capacity In High Productivity Mode 80 Racks, 1,440 Dishes/Hour. Basket Dimension 500 x 500mm. Overall Dimensions W650 x D745 x H1,550mm. (2013). - LOT 5
![site]()
Electrolux AOS101EBK2 Air-O-Steam Combination Electric Oven
Cooking Temperatures Air Conventional 300°C, Steam 130°C, Combi 250°C. Overall Dimensions W898 x D915 x H1,058mm. Voltage 400V. (2013). - LOT 6
![site]()
Electrolux Professional 700XP 2 x 14 Litre Twin Tank Electric Fryer
Thermostat Range 105-185°C. Overall Dimensions W800 x D730 x H900mm. Tray Dimension Overall L320 x W220 x H120mm. Voltage 400V. - LOT 7
![site]()
Electrolux Professional 700XP 4 Plate Electric Oven - 371016
Oven Working Temperature Range 100-300°C. Overall Dimensions W800 x D730 x H900mm. - LOT 8
![site]()
Huvema HU 20 F Super Pillar drill
Rise & Fall Table Dimension 280 x 280mm. Drilling Capacity Ø20mm. Spindle Taper MT2. Distance Spindle To Column 180mm. Drilling Depth 80mm. Speed Range 210-2,500rpm (0.75kW Motor). Maximum Distance Spindle To Table 435mm. Column Ø80mm. Voltage 400V. S/No. 11110-1030 (2016). - LOT 9
![site]()
Huvema HU 20 F Super Pillar drill
Rise & Fall Table Dimension 280 x 280mm. Drilling Capacity Ø20mm. Spindle Taper MT2. Distance Spindle To Column 180mm. Drilling Depth 80mm. Speed Range 210-2,500rpm (0.75kW Motor). Maximum Distance Spindle To Table 435mm. Column Ø80mm. Voltage 400V. S/No. 11110-1026 (2015). - LOT 10
![site]()
Gemini Genie 400 Encapsulated Wash Station
Approx Internal Chamber Dimensions W545 x D315 x H630mm. Voltage 220V. - LOT 11
![site]()
- LOT 12
![site]()
Moffat Stainless Steel Commercial Sink Unit With Mixer Tap
Overall Dimensions W1,150 x D800 x H880mm. - LOT 14
![site]()
Essential Information
General Information
- Auction Dates
- Starts: 23 September 2025 at 13:00 BSTEnds: 21 October 2025 at 15:00 BST
- Site Address
- UNIVERSITY OF SHEFFIELDADVANCED MANUFACTURING PARKCATCLIFFE, ROTHERHAMS60 5TZUnited Kingdom
- Viewing Days
- By Appointment OnlyViewings strictly by appointment only – Please contact Apex to make an appointment.
Fees & Payment
- Currency
- GBP
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- Payment is due immediately on receipt of invoice.
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.
Goods
- Clearance days
- 27 October 2025 at 09:00 GMT - 31 October 2025 at 16:00 GMT
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all shipping and rigging charges.
- Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- Sales Contacts
- Auction informationKata Keresztes69 Middle Street
Brighton
BN11AL
United Kingdom info@apexauctions.co.uk+441273224466