Surplus Automotive Engine Testing & Emissions Equipment – AVL Dynos, Horiba Analysers, Kistler, Mycom, TDK Lambda & More
Starts: 11 August 2026 at 17:00 BST
Ends: 01 October 2026 at 15:00 BST
Surplus Automotive Engine Testing & Emissions Equipment No Longer Required By The Business. Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 75 of 75 lots
- LOT 12
![site]()
Atlas Copco GA 18+ Rotary Screw Air Compressor With Atlas Copco FD60 Air Dryer, Ecoair 1,300L Air Receiver & Ecoair TS4 Oil/Water Separator
Maximum Working Pressure 7.5bar. Capacity/Free Air Delivery 58.1l/s. Motor Power 18.5kW. Voltage 400V. S/No. AP1318677 (2011). - LOT 1
![site]()
5 Horiba Analyser Units
MEXA-7400 SLE, CVS-7200SLE & MEXA-7500D Analysing Accuracy +/- 1 % Full Scale, Response 2.0 Seconds Analysing: THC,CO,CO2,NOx,CH4. Horiba Analysers With Dilute 3 Phase Bagged Emissions And 2 Direct Raw Sample Lines (Pre & Post Cat) - LOT 2
![site]()
AVL Elin EBG Elektronik Indy 22-2/0525-1XS Dyno
Power 220-200kW. Speed Range 0-12,000rpm. Voltage 500V. Current 290A. Frequency 200Hz. Protection Grade IP23. Inertia Torque 0.32kgm². S/No. 127068 (2003). - LOT 4
![site]()
Mycom HS 6023 Chiller/Rotary Compressor With MYCOM‑CP II E Control
Maximum Operating Pressure 23.0 bar(g). Allowable Operating Pressure 34.4 bar(g). Operating Temperature Range 0-100°C. S/No. CT/OS/CGA (2002). - LOT 5
![site]()
AVL Elin EBG Elektronik Indy 33/2p/0700 Dyno
Power 330-300kW. Speed 10,000rpm. Voltage 500V. Current 400A. Frequency 167Hz. Protection Grade IP23. Inertia Torque 0.96kgm². S/No. 127068 (2003). - LOT 6
![site]()
2 Horiba Analyser Units
"Raw Gaseous Multi-Component Gas Analysis: NOₓ, CO, CO₂, HC, O₂ Used In Engine Calibration, Emission Compliance & After-Treatment Development." Horiba MEXA-7500DEGR Rack. - LOT 8
![site]()
- LOT 9
![site]()
- LOT 11
![site]()
AVL Oil Conditioning System Type 554-400 With Allen Bradley Microview Control
Cooling Capacity 50kW. Oil Temperature Range +70°C to 140 °C. Voltage 400V. S/No. 0617 (2003). - LOT 13
![site]()
- LOT 18
![site]()
AVL Puma System (Zentro -Elektrik) Power Supply ZPS 3/48/65 DC voltage and current Unit With Alternator Switch Box & Leads
Cooling Capacity 20 kW to 120 kW. Temperature Range -25° C to + 120° C. Voltage 230V. (2003). - LOT 23
![site]()
Hatton 5724 Vehicle Restraint Device
Maximum Vehicle Weight 3,500kg Connection Height Range 165-625mm From Floor Level. Operating Temp -15°C-50°C. (2013). - LOT 25
![site]()
DST Seibu Giken D-Max Desiccant Wheel Rotor Unit Type RU-82.007108
Rotor DMR Ø=770 x 200mm. Voltage 230V. - LOT 27
![site]()
Mobile EVG Lufttechnik AVHN 1120 M High volume axial air displacement Fan
Motor 30kW. Volume Flow (V̇) 21.66 m³/s (78,000 m³/h). Maximum Speed 1,450rpm. S/No. 25516/1/2 (2001). - LOT 30
![site]()
SVL Electrical Box Column & Boom With Pendant Control
Contains FEMS & Signal Connections For Engine Sensor Measurement. Approx Span 2m. Height Of Column 3.05m. - LOT 49
![site]()
Steel Parts Trolley with Adjustable Riser Support Blocks
Overall Dimensions L1,600 x W900 x H1,030mm (To Handle). - LOT 20A
![site]()
Coolmobile 25 Portable Air Conditioning Unit With Digital Climate Control
Cooling Capacity 7.32Kw. Airflow 10.5 - 8.5m3 / hr. Connection 230V/50Hz. Starting Current 57A. Operating Current 13A. Power Consumption 2.6kW. Airfilter Aluminium & Carbon. Maximum Static Pressure 30mm. - LOT 10
![site]()
AVL Fuel Mass Flow Meter Type 7351 CST & AVL Fuel Temperature Control Type T753-CH
Control Range -25°C To +80°C. S/No. 1300 & 1431 (2003). - LOT 3
![site]()
Mycom HS 6023 Chiller/Rotary Compressor With MYCOM‑CP II E Control
Maximum Operating Pressure 23.0 bar(g). Allowable Operating Pressure 34.4 bar(g). Operating Temperature Range 0-100°C. S/No. CT/OS/CGB (2002). - LOT 14
![site]()
AVL Fuel Mass Flow Meter Type 7351 CST & AVL Fuel Temperature Control Type T753C-30°
Control Range -25°C To +80°C. S/No. 1053 & 002 (2003). - LOT 19
![site]()
AVL Air Coolant Conditioning System Type 554 P 3.6 With Allen Bradley Microview Control & Pump & Piping
S/No. 0370 03 554 P 3.6 5A. - LOT 24
![site]()
Quantity Of Assorted electrically Heating Hoses
1.25m Long (Heated) x 1/4” PTFE c/w 6mm OD S/S tube 240v, J Type Thermocouple Fitted Dual Zone Digital Temperature Controller - LOT 26
![site]()
DST Seibu Giken D-Max Desiccant Wheel Rotor Unit Type RU-62.0000195
Rotor DMR Ø=550 x 200mm. Voltage 230V. - LOT 28
![site]()
Electrically Heated Hoses
There Are 3 Sections Of 3.1m x 4" Solid SS (Vertical Wall) & 1.5m x 4" Solid SS (Horizontal Floor) + 1.5 x 4" Meter Flexible SS (Horizontal Floor) With Transport Trollies - LOT 29
![site]()
SVL Electrical Box Column & Boom With Pendant Control
Contains FEMS & Signal Connections For Engine Sensor Measurement. Approx Span 3.1m. Height Of Column 3.86m. - LOT 40
![site]()
2 Horiba Booster Sampling Units Model BSPU-702C
Voltage 230V, 3.5kVA. S/No. 42008490081 (2002). - LOT 42
![site]()
Parker Analytical Gas Systems Zero Air Generator Model 76-830-220
Inlet Pressure Max/Min 8.5-2.5bar. Ambient Working Temperature Max/Min 38-16°C. Voltage 230V. - LOT 46
![site]()
Steel Parts Trolley with Adjustable Riser Support Blocks
Overall Dimensions L1,600 x W900 x H1,030mm (To Handle). - LOT 48
![site]()
Steel Parts Trolley with Adjustable Riser Support Blocks
Overall Dimensions L1,600 x W900 x H1,030mm (To Handle). - LOT 21A
![site]()
TDK Lambda Gen 60-250-MD-3P400 DC Power Supply
Output Voltage: 0–60 V DC. Output Current: 0–250 A DC. Rated Power: 15 kW. - LOT 7A
![site]()
Carbon Zap Gasoline Injector Bench Model GDU-2R/55
Up To 850 bar GDI Testing. Dynamic Mass Measurement With High Precision. Spray Pattern Visualization Up To 1,000 bar. Full Injector Electrical And Hydraulic Diagnostics, Automatic Test Cycles And Cleaning. Support For All GDI Injector Types (Solenoid & Piezo). S/No. 011081658 (2015). - LOT 47
![site]()
Steel Parts Trolley with Adjustable Riser Support Blocks
Overall Dimensions L1,600 x W900 x H1,030mm (To Handle).
Essential Information
General Information
- Auction Dates
- Starts: 11 August 2026 at 17:00 BSTEnds: 01 October 2026 at 15:00 BST
- Site Address
- WEST MIDLANDSUnited Kingdom
- Viewing Days
- By Appointment OnlyViewings strictly by appointment only – Please contact Apex to make an appointment.
Fees & Payment
- Currency
- GBP
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- Payment is due immediately on receipt of invoice.
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.
Goods
- Clearance days
- 05 October 2026 at 08:00 BST - 23 October 2026 at 15:00 BSTCollections strictly by appointment only.
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all shipping and rigging charges.
- Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- Sales Contacts
- Auction informationAnais Tournois69 Middle Street
Brighton
Please Select
BN11AL
United Kingdom [email protected]+44 1273 224466