Special sale of ventilation equipment and other machines
Starts: 10 June 2026 at 14:00 BST
Ends: 02 July 2026 at 14:00 BST
Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 67 of 67 lots
- LOT 1
![site]()
TRUMPF TrumaBend V85S hydraulic press brake
Bending force: 85 tonnes - Bending length: 2550 mm - Stroke: 215 mm - Operating pressure: 340 bar - Safety clearance: 106 mm - Year: 2002 - Serial number: B0103A0035 - Origin: Austria - Weight: 9 tonnes - Location: 59270 Merris, France - Loading costs: €1,200 - LOT 2
![site]()
IOWA PRECISION JOUANEL CORNERMATIC CM-C-DHA-2M 30MM automatic double-head angle insert and crimping machine for ventilation ducts
Thickness capacity: 0.6 to 1.3 mm - Speed per angle: Approximately 2.5 seconds per angle - Type of connectors: TDC (Transverse Duct Connector) - Duct length processed: Power adjustment: 4′ to 6′ (1.20 m to 1.80 m) - Material: Mild steel only - Time per complete section: 8 angles in approximately 60 seconds - Year: 2010 - Serial No. CM0211 - Origin: USA - Weight: 400 kg - Location: 59270 Merris, France - Loading costs: €400 - LOT 3
![site]()
Corner Matic JOUANEL Corner - SH automatic angle insertion and crimping machine for ventilation ducts
Frame type: TDC - Cycle time: 3 sec. per angle bracket - Compressed air requirements: 5 to 6 bar - Angle types: TDC - Year: 2010 - Thickness: 0.56 to 1.27 mm - 230 V - 2.4 A - Origin: France - Weight: 400 kg - Location: 59270 Merris, France - Loading costs: €400 - LOT 4
![site]()
JOUANEL RAID2515 duct stiffener
Capacity: 15/10 mm - Serial no.: 100908545 - 2.2 kW - Year: 2010 - Origin: France - Weight: 500 kg - Location: 59270 Merris, France - Loading costs: €400 - LOT 5
![site]()
Corner Matic JOUANEL IOWA PRECISION CM-C-20MM Corner - SH automatic machine for inserting and crimping corner fittings for ventilation ducts
Frame type: TDC - Cycle time: 3 sec. per bracket - Compressed air requirement: 5 to 6 bar - Angle types: TDC - Year: 2010 - Thickness: 0.56 to 1.27mm - 230 V - 2.4 A - Origin: France - Weight: 400 kg - Location: 59270 Merris, France - Loading costs: €400 - LOT 6
![site]()
CORNERMATIC JOUANEL Mestek Machinery CM-C-20MM-DHA-2 automatic double-head angle insert and crimping machine for ventilation ducts
Thickness capacity: 0.6 to 1.3 mm - Speed per angle: Approximately 2.5 seconds per angle - Joint type: TDC (Transverse Duct Connector) - Duct length processed: Power adjustment: 4′ to 6′ (1.20 m to 1.80 m) - Material: Mild steel only - Time per complete section: 8 angles in approximately 60 seconds - Year: 2010 - Origin: USA - Weight: 400kg - Location: 59270 Merris, France - Loading costs: €400 - LOT 7
![site]()
COMAC 303 HV 1998 profile bender – L 60mm
L-shaped angle: 60mm - Round O: 60mm Roller diameter: 180 mm - Year: 1998 - Origin: Italy - Weight: 800kg - Location: 59270 Merris, France - Loading costs: €250 - LOT 8
![site]()
SENTE MAKINA PFD-S-4 plasma sheet feeder
WIDTH Feed speed: 4 m/min - Sheet thickness: 0.5 to 1.2 mm - Power: 2 kW - Year: 2020 - Origin: Turkey - Weight approx. 1 tonne - Location: 59270 Merris, France - Loading costs: €250 - LOT 9
![site]()
MEP TIGER 350SX cut-to-length machine with roller feed
Cutting speed: 15 to 180 rpm - Blade diameter: 350 mm - Blade bore diameter: 32 mm - Blade thickness: 2.5 mm - Feed: 6200 mm - Manual stop: 3000 mm - Year: 2005 - Origin: Italy - Weight: 500 kg - Location: 59270 Merris, France - Loading costs: €150 - LOT 10
![site]()
SPIRO SLL riveting machine from 2000
Arm length: 400 mm - Min. tube diameter: 100 mm - Max. material thickness: 2x1.5 mm galvanised steel / 3x1.0 mm galvanised steel / 2x0.8 mm stainless steel - Capacity: 60 strokes/min - Year: 2000 - Origin: Switzerland - Weight: 300 kg - Location: 59270 Merris, France - Gooseneck - Loading costs: €150 - LOT 11
![site]()
Green rolling machine
Origin: France - Weight: 500 kg - Location: 59270 Merris, France - Loading costs: €50 - LOT 12
![site]()
WORTHINGTON CREYSSENSSAC ROLLAIR 4000AX compressor
Pressure: 13 bar - Motor power: 30 kW - Serial No.: 398068 - Origin: France - Weight: 400kg - Location: 59270 Merris, France - Loading costs: €150 - LOT 13
![site]()
ARO MA30SC spot welder
Year: 2008 - Arm span: 64 to 379mm - Effective arm length: 350mm - Max clamping force: 730 daN - Origin: France - Weight: 270 kg - Location: 59270 Merris, France - Loading costs: €50 - LOT 15
![site]()
AMADA HFE M2-EVO 2204, 4 AXES Press Brake
Year 2017 - Force 220 T - Bending length 4280 mm - Distance between uprights 3760 mm - Gooseneck 420 mm - Working speed 10mm/s - Approach speed 100 mm/s - Dimensions 5655x2620x3080mm - Weight 17000 kg - origin France - Location : 59114 Saint-Sylvestre-Cappel, France - Charges : 2500€ - LOT 16
![site]()
CNC AMADA HFE T2 1003 Press brake from 09/2017 + crush tool base + tool line
Capacity 100 T - Bending length 3110mm - Distance between uprights 2705mm - Throatdepth 420mm - Vertical travel 200mm - Number of axes: 8 - Dimensions 4320x2800x270mm - origin Japan - Approx. 30Kg - Origin : Italy. NOTE - A loading fee of EUR 850 will be added to the invoice. - Location: 59300 Valenciennes, France - LOT 17
![site]()
Laser TRUMPF type 2400t
Year : 2001 - Power 2,4 KW - Capacity in tube 154mm - Capacity in square 120mm - Capacity in rectangle 140x80mm - Maximum thickness in steel 8mm - Maximum thickness in stainless steel 4mm - Maximum thickness in aluminium 4mm - Magazine width 6500 mm - Cutting width 3000 mm - Maximum permissible weight: 20 kg/ml - Type: CO2 - EQUIPMENT: Bar feeder - Workpiece ejector - Waste ejector - Approx. 20,000 kg - Origin: Germany. NOTE - A loading fee of EUR 3,000 will be added to the invoice. Location: 59300 Valenciennes, France - LOT 18
![site]()
AMADA HFBO 8025 press brake - year 1998
Capacity 80 T - Bending length 2505mm - Distance between uprights 2120mm - Throatdepth 420mm - Weight 4990.9 kg - Vertical travel 200mm - Working speed 10mm/s - Number of backgauge axes 8 - Motor power 7.45 kW - Dimensions 3100x2185x2550mm - Weight approx. 5T - Approx. 13000Kg - Origin: Japan. NOTE - A loading fee of EUR1000 will be added to the invoice. Location: 59300 Valenciennes, France - LOT 19
![site]()
TRUMPH V50 CNC Press Brake
Capacity 50T - Bending length 1250mm - Distance between uprights 1040mm - Throat depth 410mm - Vertical stroke 215mm - Working speed 10 mm/s - Number of axes 5 - Motor power 13kW - 3x400V - 50Hz - 15A - Weight 4.7T - Dimensions 2000x1900x2400mm - Year 2004 - Origin France - Location: Valenciennes - Charges : 1000€ - LOT 20
![site]()
OPTI TURN TZ 4012 PREMIUM LINE Lathe
Serial number 58034 - Year 2013 - Weight approx 13 000 Kg - Approx. 13000Kg - Origin : France. Please Note that this lot has loading charges of EUR500. This will be added to your invoice. Location : 59300 Valenciennes, France - LOT 21
![site]()
AMADA GPN 630 Guillotine shear
Capacity 3050x6,35mm - Backgauge CNC backgauge travel 1000mm - Dimensions 3700x1990x1960mm - Approx. 12100Kg - Origin : Japan. Please Note that this lot has loading charges of EUR800. This will be added to your invoice. - Location : 59300 Valenciennes, France - LOT 22
![site]()
GER RS-10/50 surface grinder
Travels : 1000x500mm - Year 1988 - N°88/2200 - Approx. 500Kg - Origin : Italy. Location : 59300 Valenciennes, France. LOADING CHARGES: 300 EUR - LOT 23
![site]()
LAGUN FU 1250 Universal milling machine
Table size 1250 x 280mm - Longitudinal travel 850mm - Cross travel 290mm - Vertical travel 475mm - Spindle speed 35 / 250 - 250 / 1800 RPM - Spindle taper ISO 40 - DRO 3 axis Evolution 2 - Approx. 3000Kg - Origin : Spain. NOTE - A loading fee of EUR 500 will be added to the invoice. - Location: 59300 Valenciennes, France - LOT 24
![site]()
ELB SW624VAII Surface grinder
Table size 915x255mm - Grinding length 600mm - Grinding width 3100mm - Grinding height 400mm - Table speed 1000 to 3000mm/mn - Grinding wheel speed 1300/2600 rpm - Power 2kW - Approx. 3200Kg - Origin : France. NOTE - A loading fee of EUR400 will be added to the invoice. Location: 59300 Valenciennes, France - LOT 25
![site]()
HURON KU4 Universal Milling Machine
Longitudinal travel 1100mm - transverse travel 700mm - vertical travel 500mm - table surface 1435x420mm - spindle taper SA40 - universal head type Huron - spindle speed 30 to 2066 rpm - number of speeds 27 - Dimensions 2600x2000x2000mm - Approx. 3100Kg - Origin: France. NOTE - A loading fee of EUR500 will be added to the invoice. Location: 59300 Valenciennes, France - LOT 26
![site]()
ALCERA 753 Universal milling machine
Table 1200x270x16mm - Longitudinal travel 750mm - Cross travel 300mm - Vertical travel 400mm - Spindle taper SA40 - Spindle speed 35 / 1600 RPM - Dimensions 1685x1945x1915mm - Approx. 1550Kg - Origin : France. NOTE - A loading fee of EUR500 will be added to the invoice. Location: 59300 Valenciennes, France - LOT 27
![site]()
HUVEMA ZMM FU 251 Universal milling machine
Longitudinal travel - X 765mm - Cross travel - Y 230mm - Vertical travel 390mm - Table area 1120 x 250mm - Spindle taper ISO 40 - Number of spindle speeds 18 - Variable spindle speeds 40 to 2000 RPM - Longitudinal and cross feeds 12,5 to 630mm/min - Vertical feeds 5.2 to 262mm/min - Rapid feeds 1040 - 2500mm/min - Dimensions 200 x 2100 x 1900 mm - Spindle motor 4 kW - Universal head - 3-axis display - Two eyepieces - Approx. 3000 kg - Origin: Netherlands. NOTE - A loading fee of EUR 500 will be added to the invoice. Location: 59300 Valenciennes, France - LOT 28
![site]()
COLLET Boring machine
Spindle Ø 65mm - Travel of the axe X 1300mm - Travel of the axe Y 800mm - Travel of the axe Z - 800mm - Spindle stroke 600mm - Table 1000x800mm - Dimensions 4800x2200x2550mm- Cross table Boring machine - Surface plate Ø 500mm - Steady rest - 4-axis display - Approx. 8000kg - Origin: France. NOTE - A loading fee of EUR500 will be added to the invoice. Location: 59300 Valenciennes, France - LOT 29
![site]()
DUFOUR 160 Milling machine
MITUTOYO KA Counter CNC - travel X 580mm - travel Y 300mm - travel Z 430mm - Table dimensions 1000 x 250mm - Spindle speed 24-1610 rpm - Dimensions 1600 x 1800 x 1610mm - Approx. 1750Kg - Origin : France. NOTE - A loading fee of EUR350 will be added to the invoice. Location: 59300 Valenciennes, France - LOT 30
![site]()
HAU-SIMEX machine
Model SBA - Year 1991 - N°14 229 - Approx. 1500Kg - Origin : Germany. Please Note that this lot has loading charges of EUR500. This will be added to your invoice. Location : 59300 Valenciennes, France - LOT 31
![site]()
GEKA HYDRACROP 70SD punching machine
Year 1989 - No. 3139 - Approx. 100 kg - Origin: France. Location: 59300 Valenciennes, France. Loading charges: EUR 300 - LOT 32
![site]()
LISSE levelling machine
Thickness 5mm - width 700mm - Weight approx. 5 tonnes - Origin: France - Location : Valenciennes - LOT 33
![site]()
AMADA ITS 50-20 press brake
Force 50T - Max. stroke 105 mm - Weight 3450 kg - Year 1992 - LOADING CHARGES: 500 EUR - French origin - Location : 59300 Valenciennes, France - LOT 34
![site]()
FIM VERSA 2506 Notching machine
Year 1993 - n°250618 - Approx. 400Kg - Origin : GermanyPlease Note that this lot has loading charges of EUR200. This will be added to your invoice. Location : 59300 Valenciennes, France - LOT 35
![site]()
BIHLER RM 35 Spring Machine
Wire diameter 3mm - speed 250 stroke/min - sliders - 7 ton press - Dimensions 1600x1500x2100mm - Approx. 1600Kg - Origin : Germany. Please Note that this lot has loading charges of EUR450. This will be added to your invoice. Location : 59300 Valenciennes, France - LOT 36
![site]()
JOUANEL CGS-CGI 2,5 shears
Year 2008 - N° série 080406962 - Type CGi1030-20 - Capacity 25/10 - Approx. 1300Kg - Origin : France. Please Note that this lot has loading charges of EUR350. This will be added to your invoice. - Location : 59300 Valenciennes, France - LOT 37
![site]()
BIHLER spring machine
Year 1982 - N°22970 - Approx. 1600Kg - Origin : Germany. Please Note that this lot has loading charges of EUR400. This will be added to your invoice. Location : 59300 Valenciennes, France - LOT 38
![site]()
PICOT 10 G/M rolling machine
Max. capacity 1550x3mm - 380V - No. 4493 - Approx. weight 1 t - Made in France - Location : Valenciennes - Charges : 300€ - LOT 39
![site]()
CAZENEUVE HB 725 Lathe
Two axis digital readout- Height of centers 315mm - Distance between centers 2000mm - max. admitted Ø over the bed 725mm - Maximum swing over cross-slide 300mm - Hole through spindle 82mm - Spindle speed 11/1250RPM - Number of speeds 36 - Dimensions 4000x1400x1600mm - Approx. 5000kg - Origin: France. NOTE - A loading fee of EUR2000 will be added to the invoice. Location: 59300 Valenciennes, France - LOT 40
![site]()
GAMBIN 10N Milling machine
Table dimensions 1040X230mm - Longitudinal travel 600mm Cross travel 230mm - Vertical stroke 560mm - Ram stroke 210mm - Motor power 3 KW - Dimensions 1600x1600x2000mm - 10 spindle speeds 25 to 1600 rpm - 10 feed speeds 10 to 630 mm/min - Rapid traverse on all three axes - Approx. 50 kg - Origin: France. Location: 59300 Valenciennes, France. 500 EUR Loading costs - LOT 41
![site]()
LIPEMEC 515 surface grinder
Table: Table length: 200mm - Table width: 110mm - Distance between table and spindle: 90mm - Magnetic plate: 105 x 155mm - Travel: - Grinding length: 160mm - Grinding width: 110mm - Longitudinal stroke (x-axis): 200 mm - Transverse stroke (y-axis): 110 mm - Grinding wheel: - Grinding wheel diameter: 125 mm - Grinding wheel width: 16 mm - Inner diameter: 16 mm - Spindle motor: 0.35 [HP] - Dimensions: - Dimensions (length-depth-height): 1000 x 650 x 1500mm - Weight: 350 [kg] - Approx. 100Kg - Origin: France. Location: 59300 Valenciennes, France. 500 EUR loading fee - LOT 42
![site]()
JEAN PERROT MK.3003 shear
Cutting thickness 3mm - Cutting length 3000mm - Electric rear stop - Year 1981 - Serial no. 896.1012 - Approx. weight 8 tonnes - Origin: France - Location : Valenciennes - Charges : 500€ - LOT 43
![site]()
SOCAD 13-5 Profile bending machine
Capacity in L profile 60x60x5mm - capacity in the square bars 40x20 or 50x17mm - power 6 kw - Approx. 3100Kg - Origin : France. Please Note that this lot has loading charges of EUR400. This will be added to your invoice. Location : 59300 Valenciennes, France - LOT 44
![site]()
WMW GOTHA SWU II Tool grinding machine
Parts max Ø 250mm - Maximum grinding length 450mm - Max length of the parts 600mm - Longitudinal travel 500mm - Cross travel 230mm - Spindle speed 2200/3500/5200 RPM - Table area 950x120mm - Orientation angle of the swivelling table 0-90° - Maximum grinding wheel diameter 160 mm - Power 1.8 kW - Dimensions 1500 x 1000 x 1600 mm - Manual table movement 500 mm - Automatic table movement 300 mm - Vertically adjustable grinding head 250 mm - 350° rotating grinding head - 15° tilting grinding head - Approx. 900 kg - Origin: France. NOTE - A loading fee of EUR 200 will be added to the invoice. Location: 59300 Valenciennes, France - LOT 45
![site]()
GSP 44D10 Radial grinder
N°11514 - Approx. 1800Kg - Origin : France. Please Note that this lot has loading charges of EUR650. This will be added to your invoice. Location : 59300 Valenciennes, France - LOT 46
![site]()
POLYSOUDE linear welding robot
PLS500S control unit - Year of manufacture: 1988 - No. 883459 - Approx. weight: 2 tonnes - Origin: France - Location : Valenciennes - Charges : 450€ - LOT 47
![site]()
TRUMPF TKF 1500-0 chamfering machine
Maximum chamfer length for steel 400 N/mm²: 15 mm - Maximum chamfer depth for steel 400 N/mm²: 10.6 mm - Maximum chamfer length for 600 N/mm² steel: 9 mm - Maximum chamfer height for 600 N/mm² steel: 6.4 mm - Maximum chamfer length for 800 N/mm² steel: 6 mm - Maximum chamfer height for 800 N/mm² steel: 4.2 mm - Minimum radius 55 mm - Cutting speed (max.) 2 m/min - Rated input power 2000 W - Sheet thickness 4–60 mm - Length 554 mm - Height 361 mm - Weight 16.5 kg - Made in Switzerland - Location: Roubaix - Charges : 50€ - LOT 48
![site]()
STRONG BULL TRS 300 profile cutting machine
Cutting height: 100 mm - Cutting capacity: 300 mm - Year 2021 - Dimensions: 1,300 (H) x 1,890 (L) x 1,020 mm (W) - Weight: 220 kg - Origin: Spain - Location : Valenciennes - Charges : 250€ - LOT 49
![site]()
ERNAULT SOMUA AC 280 Lathe
Spindle speed 50-2500 rpm - Distance between centers 500mm - Height of centers 150mm - Ø of the tailstock sleeve 45mm - Width of the bench 210mm - Chuck Ø 160mm - Dimensions 1700x960x1800mm - Approx. 1200Kg - Origin : France. NOTE - A loading fee of EUR 350 will be added to the invoice. Location: 59300 Valenciennes, France - LOT 50
![site]()
Welding machine semi auto-Brand SAF-Type SAFMIG 360 BLS-with reel Dévisaf DZ1
With Dévisaf DZ1 wire feeder - Approx. 100Kg - Origin : France. Please Note that this lot has loading charges of EUR100. This will be added to your invoice. Location : 59300 Valenciennes, France - LOT 51
![site]()
Welding machine semi auto -Brand SAF -Type SAFMIG 480 TRS Pllus-with reel Dévisaf DV 24
With Dévisaf DV 24 wire feeder - Approx. 100Kg - Origin : France. Please Note that this lot has loading charges of EUR100. This will be added to your invoice. Location : 59300 Valenciennes, France - LOT 52
![site]()
GSP 405D100 Radial grinder
N°2162 - 220V - 50Hz - Approx. 50Kg - Origin : France. Location : 59300 Valenciennes, France. LOADING CHARGES: 300 EUR - LOT 53
![site]()
VEBA SC 25 panel saw
Speed 4,200 rpm - Blade diameter 250 mm - Blade angle 45° - 400 V - 50 Hz - 1.5 kW - 3.2 A - Weight approx. 220 kg - Year 2014 - No. 14251785 - Origin: FranceLocation : Valenciennes - LOT 54
![site]()
GAMBIN 1M Milling machine
Table 1200x270 mm - Approx 200Kg - Origin : France. Please Note that this lot has loading charges of EUR200. This will be added to your invoice. Location : 59300 Valenciennes, France - LOT 55
![site]()
MILLER Syncrowave 300 Welding post
Approx. 100Kg - Origin : Germany. Please Note that this lot has loading charges of EUR100. This will be added to your invoice. Location : 59300 Valenciennes, France - LOT 56
![site]()
ATLAS FX/TRF lifting table
Approx. 100Kg - Origin : France. Location : 59300 Valenciennes, France. LOADING CHARGES: 50 EUR - LOT 57
![site]()
VIRAX 604 threading machine
Approx 400Kg - Origin : France. Please Note that this lot has loading charges of EUR100. This will be added to your invoice. Location : 59300 Valenciennes, France - LOT 58
![site]()
VIRAX manual bender
Approx. 800Kg - Origin : France. Location : 59300 Valenciennes, France. LOADING CHARGES: 500 EUR - LOT 59
![site]()
CASTOLIN CASTOTIG XUPER WAVE 360 AC/DC welding post
Serial number 0213984 - Approx 200kg - Origin : France. Location : 59300 Valenciennes, France. LOADING CHARGES: 100 EUR - LOT 60
![site]()
MIGATRONIC MTE 220 welding unit
MIGATRONIC MTE 220 DIALOG welding pos - Approx 400kg - Origin : France. Location : 59300 Valenciennes, France. LOADING CHARGES: 100 EUR - LOT 61
![site]()
MULLER MIGBLU 420 welding post
MILLER T424 - N° de série 0000097898 Spool - Approx 800kg - Origin : France. Location : 59300 Valenciennes, France. LOADING CHARGES: 100 EUR - LOT 62
![site]()
Manual folder
Approx 200Kg - Origin : France - Location : 59300 Valenciennes, France. LOADING CHARGES: 100 EUR - LOT 63
![site]()
Roller forming machine
Weight approx. 300kg - Made in France - Location : Valenciennes - Charges : 100€ - LOT 64
![site]()
Hand balance
Approx. 200Kg - Origin : France. Location : 59300 Valenciennes, France. LOADING CHARGES: 100 EUR - LOT 65
![site]()
Hand balancer
Approx 200Kg - Origin : France. Location : 59300 Valenciennes, France. LOADING CHARGES: 100€ - LOT 66
![site]()
Double grinding machine
∅ grinding wheels 180mm - Approx. 200kg - Origin : France. Location : 59300 Valenciennes, France. LOADING CHARGES: 100 EUR - LOT 67
![site]()
MAPE grinding machine
Approx. 80Kg - Origin : France. Please Note that this lot has loading charges of EUR50. This will be added to your invoice. - Location : 59300 Valenciennes, France
Essential Information
General Information
- Auction Dates
- Starts: 10 June 2026 at 14:00 BSTEnds: 02 July 2026 at 14:00 BST
- Site Address
- MULTILOCATIONPlease refer to lots descriptionsFrance
- Viewing Days
- By Appointment Only
Fees & Payment
- Currency
- EUR
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- A link to the invoice will be emailed to successful bidders
- Payment is due immediately on receipt of invoice
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.
- NB: Please reference invoice number on bank transfer.
Goods
- Clearance days
- 20 July 2026 at 08:00 BST - 24 July 2026 at 15:00 BSTCollections strictly by appointment only
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all transport and rigging charges.
- Items are only available for collection once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- For a list of companies that can assist with removals and transportation please visit the Apex Auctions website's Service Providers section.
- Sales Contacts
- Auction information