Late models Tederic and JSW Injection Moulding Machines
Starts: 27 August 2026 at 14:00 BST
Ends: 01 October 2026 at 14:00 BST
Selection of 2015-2021 Injection Moulding Machines. Sale due to closure of one of the plants. Note: See lots for location. Please refer to the Sale Information section for details of any additional fees that may apply upon purchase. Please note: All closing bids are subject to vendor approval prior to Apex issuing final invoices.
Share:
Showing 8 of 8 lots
- LOT 1
![site]()
2021 Tederic DT500 Injection Moulding Machine with Robot
Closing force: 5000 kN. Diameter of center ring injection side: 200 mm. Diameter of center ring ejection side: 100 mm. Distance between the bars: 820 x 820 mm. Min mould height: 320 mm. Max mould height: 800 mm. Clearance between tables: 1650 mm. Capacity injection: 2031 cm3. Hydro Ejector: Yes. Quantity core pulling: 2. Turn on hours: 17436,6. Work hours: 4008,9. Motor: 68 kW. Heating power: 46 kW. Worm diameter: 80 mm. Ejector stroke: 200 mm. Machine S/No: T05000654. Robot: 2015 RB200CN. Note: The auction includes the injection molding machine and the robot, but does not include other equipment visible in the photos, such as plastic feeders and temperature controllers for heated channels visible in the attached photos, as well as conveyor belts and safety fences. - LOT 2
![site]()
2021 Tederic DT400 Injection Moulding Machine
Closing force: 4000 kN. Diameter of center ring injection side: 160 mm. Diameter of center ring ejection side: 100 mm. Distance between the bars: 730 x 730 mm. Min mould height: 280 mm. Max mould height: 750 mm. Clearance between tables: 1500 mm. Capacity injection: 1347 cm3. Hydro Ejector: Yes. Quantity core pulling: 2. Turn on hours: 21517,6. Work hours: 8912,3. Motor: 40 kW. Heating power: 33 kW. Worm diameter: 70 mm. Ejector stroke: 200 mm. Machine S/No: T04000648. Robot: 2019 FCW05-1000P. Note: The auction includes the injection molding machine and the robot, but does not include other equipment visible in the photos, such as plastic feeders and temperature controllers for heated channels visible in the attached photos, as well as conveyor belts and safety fences. - LOT 3
![site]()
2020 Tederic D450/3200 Injection Moulding Machine
Closing force: 4500 kN. Diameter of center ring injection side: 200 mm. Diameter of center ring ejection side: 100 mm. Distance between the bars: 780 x 780 mm. Min mould height: 300 mm. Max mould height: 780 mm. Clearance between tables: 1580 mm. Capacity injection: 1741 cm3. Hydro Ejector: Yes. Quantity core pulling: 2. Turn on hours: 42864,1. Work hours: 16385,9. Motor: 56 kW. Heating power: 39 kW. Worm diameter: 75 mm. Ejector stroke: 200 mm. Machine S/No: T3045-0141. Robot: 2018 SW7315DS. Note: The auction includes the injection molding machine and the robot, but does not include other equipment visible in the photos, such as plastic feeders and temperature controllers for heated channels visible in the attached photos, as well as conveyor belts and safety fences. - LOT 4
![site]()
2019 Tederic D680 Injection Moulding Machine
Closing force: 6800 kN. Diameter of center ring injection side: 250 mm. Distance between the bars: 1010 x 1010 mm. Min mould height: 450 mm. Max mould height: 1100 mm. Clearance between tables: 2250 mm. Capacity injection: 2531 cm3. Hydro Ejector: Yes. Quantity core pulling: 3. Turn on hours: 31272,6. Work hours: 9990,2. Motor: 53 kW. Heating power: 37 kW. Worm diameter: 85 mm. Ejector stroke: 300 mm. Machine S/No: H1068-0001. Robot: 2019 SW7315DS. Note: The auction includes the injection molding machine and the robot, but does not include other equipment visible in the photos, such as plastic feeders and temperature controllers for heated channels visible in the attached photos, as well as conveyor belts and safety fences. - LOT 5
![site]()
2015 Tederic DT250/1100 Injection Moulding Machine
Closing force: 2500 kN. Diameter of center ring injection side: 160 mm. Diameter of center ring ejection side: 100 mm. Distance between the bars: 580 x 580 mm. Min mould height: 250 mm. Max mould height: 600 mm. Clearance between tables: 1150 mm. Capacity injection: 601 cm3. Hydro Ejector: Yes. Quantity core pulling: 2. Turn on hours: 79526,7. Work hours: 40612. Motor: 31 kW. Heating power: 19,7 kW. Worm diameter: 55 mm. Ejector stroke: 160 mm. Machine S/No: D1025/0747. Robot: 2019 SW6310S. Note: The auction includes the injection molding machine and the robot, but does not include other equipment visible in the photos, such as plastic feeders and temperature controllers for heated channels visible in the attached photos, as well as conveyor belts and safety fences. - LOT 6
![site]()
2009 JSW 350AD Injection Moulding Machine
Closing force: 3440 kN. Worm diameter: 66 mm. Injection volume: 890 g. Max shot weight PP: 767 g. Distance between tie bars: 730 mm. Min mould height: 300 mm. Max mould height: 670 mm. Max height of the ejector stem: 365 mm. Diameter of the centering stabilising rings: 160 mm. Max opening stroke: 700 mm. Max ejector stroke: 152 mm. Plates size: 1085 x 1085 mm. Max injection speed: 160 mm/s. Max injection pressure: 1770 bar. Machine S/No: 71345098088. - LOT 7
![site]()
Jungheinrich ETM10G-359ZT 1T Electric reach truck
Rated load capacity: 1,000 kg. Maximum lifting height: 3,590 mm. Drive: Electric - LOT 8
![site]()
Dry Air Dryer MOTANLA/8-200
Dry Air Capacity: 200 m³/h. Connected Power: Approx. 6 kW (for the LA/8-200 unit) Equipment: 2 drying tanks with a capacity of 300 liters each, Adsorption bed regeneration system, Automatic drying temperature control, Closed dry air circuit. Can be combined with a pneumatic granulate conveying system
Essential Information
General Information
- Auction Dates
- Starts: 27 August 2026 at 14:00 BSTEnds: 01 October 2026 at 14:00 BST
- Site Address
- MULTILOCATION - See Individual lots for location of the assetŁowicz and KoronowoPoland
- Viewing Days
- By Appointment OnlyStrictly by appointment, please contact Apex.
Fees & Payment
- Currency
- EUR
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- A link to the invoice will be emailed to successful bidders
- Payment is due immediately on receipt of invoice
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque
- NB: Please reference invoice number on bank transfer.
Goods
- Clearance days
- 05 October 2026 at 08:00 BST - 16 October 2026 at 14:00 BSTStrictly by appointment, please contact Apex.
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all transport and rigging charges.
- Items are only available for collection once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- For a list of companies that can assist with removals and transportation please visit the Apex Auctions website's Service Providers section.
- Sales Contacts
- Auction informationZuzanna Bodziachowska-KluzaAlmax Spolka Cywilna
Częstochowa
42-200
Poland [email protected]+48 34 888 1030