Engineering Business Closure – Star Sliding Head Lathes, Nakamura CNCs & Toolroom Equipment

Starts: 22 July 2025 at 09:00 BST
Ends: 11 September 2025 at 15:00 BST
2019 Nakamura-Tome WT-100 CNC Twin Spindle, Twin Turret CNC Multitasking Lathe, 2015 Nakamura-Tome Super NTY3 CNC Twin Spindle, Triple Turret CNC Multitasking Lathe, 2022 Star SB-20R Type G CNC Sliding Head Machine, 2012 & 2011 Star SB-20 Type E CNC Sliding Head Machine, Manual Mills, Lathes, Grinders, Tooling, Collets, and more. Please see sale information section for additional fees that may be applicable. NOTE: Vendor to approve all closing bids prior to Apex invoicing.
Share:
Showing 92 of 92 lots
  • IMG_4380.JPEG
    IMG_4381.JPEG
    IMG_4382.JPEG
    IMG_4383.JPEG
    IMG_4384.JPEG
    IMG_4385.JPEG
    IMG_4386.JPEG
    IMG_4387.JPEG
    IMG_4388.JPEG
    IMG_4389.JPEG
    IMG_4390.JPEG
    IMG_4391.JPEG
    IMG_4392.JPEG
    IMG_4393.JPEG
    IMG_4394.JPEG
    IMG_4395.JPG
    IMG_4396.JPEG
    IMG_4397.JPEG
    IMG_4398.JPEG
    IMG_4399.JPG
    IMG_4400.JPEG
    IMG_4401.JPEG
    IMG_4402.JPEG
    IMG_4403.JPEG
    IMG_4404.JPEG
    IMG_4405.JPEG
    IMG_4406.JPEG
    IMG_4407.JPEG
    IMG_4408.JPEG
    IMG_4409.JPEG
    IMG_4410.JPEG
    IMG_4411.JPEG
    IMG_4412.JPEG
    IMG_4413.JPEG
    IMG_4414.JPEG
    IMG_4415.JPEG
    IMG_4416.JPEG
    IMG_4417.JPEG
    IMG_4418.JPEG
    IMG_4419.JPEG
    IMG_4420.JPEG
    IMG_4421.JPEG
    IMG_4422.JPEG
    IMG_4423.JPEG
    IMG_4424.JPEG
    IMG_4425.JPEG
    IMG_4426.JPEG
    IMG_4427.JPEG
    IMG_4428.JPEG
     site
    LOT 1

    2019 Nakamura-Tome WT-100 CNC Twin Spindle, Twin Turret CNC Multitasking Lathe with NT Smart X Control & FMB Barfeeder

    With Hardinge A2-5 65DL Collet Chucks. Maximum Turning Upper/Lower Turrets Ø190mm. Standard Turning Upper/Lower Turrets Ø170mm. Maximum Turning Length 503mm. Bar Capacity Main/Sub Spindle Ø42mm. Distance Between Spindle Noses 735-210mm. Axis Travel 'X1'=135mm, 'X2'=135mm, 'Z1'=503mm, 'Z2'=503mm, 'Y'= ±31mm, 'B'=525mm, 'C'=0.001° (Increment). Rapid Traverse 'X1/X2'=16m/min, 'Z1/Z2'=40m/min, 'Y'=6m/min, 'B'=40m/min, 'C'=600rpm. Maximum Main Spindle Speed 6,000rpm (11/7.5kW Motor), Spindle Nose A2-5, Maximum Sub Spindle Speed 6,000rpm (11/7.5kW Motor), Spindle Nose A2-5. Spindle Through Bores Ø56mm. Maximum Driven Tooling Speed 6,000rpm (7.1/2.2kW Motor). Upper/Lower Dodecagonal Drum Turret Positions 12, No. Of Indexing Positions 24. Turning Tool Shank 20 x 20, Boring Bar Ø25mm. FMB Turbo 5-65/3200A Barfeeder Length 4,400mm. Barfeeder S/No. 19-410470 R1702217 (2019). Machine S/No. MD100510L (2019).
  • IMG_4429.JPEG
    IMG_4430.JPEG
    IMG_4431.JPEG
    IMG_4432.JPEG
    IMG_4435.JPEG
    IMG_4436.JPEG
    IMG_4437.JPEG
    IMG_4438.JPEG
    IMG_4439.JPEG
    IMG_4440.JPEG
    IMG_4441.JPEG
    IMG_4442.JPEG
    IMG_4443.JPEG
    IMG_4444.JPEG
    IMG_4445.JPG
    IMG_4446.JPEG
    IMG_4447.JPEG
    IMG_4448.JPEG
    IMG_4449.JPEG
    IMG_4450.JPG
    IMG_4451.JPEG
    IMG_4452.JPEG
    IMG_4453.JPEG
    IMG_4454.JPEG
    IMG_4455.JPEG
    IMG_4456.JPEG
    IMG_4457.JPEG
    IMG_4458.JPEG
    IMG_4459.JPEG
    IMG_4460.JPEG
    IMG_4461.JPEG
    IMG_4462.JPEG
    IMG_4463.JPEG
    IMG_4464.JPEG
    IMG_4465.JPEG
    IMG_4466.JPEG
    IMG_4467.JPEG
    IMG_4468.JPEG
    IMG_4469.JPEG
    IMG_4470.JPEG
    IMG_4471.JPEG
    IMG_4472.JPEG
    IMG_4473.JPEG
    IMG_4474.JPEG
    IMG_4475.JPEG
    IMG_4476.JPEG
    IMG_4477.JPEG
    IMG_4478.JPEG
    IMG_4479.JPEG
    IMG_4480.JPEG
    IMG_4750.JPEG
    IMG_4751.JPEG
    IMG_4752.JPEG
    IMG_4753.JPEG
     site
    LOT 2

    2015 Nakamura-Tome Super NTY3 CNC Twin Spindle CNC Multitasking Lathe with Nakamura Tome Control & FMB Barfeeder

    Triple Turret. Hainbuch Aflix 65 Collet Chucks. Maximum Turning Upper/Lower Turrets Ø175mm. Standard Turning Upper/Lower Turrets Ø170mm. Maximum Turning Length 588mm. Bar Capacity Main/Sub Spindle Ø42mm. Distance Between Spindle Noses 820-200mm. Axis Travel 'X1'=135mm, 'X2'=135mm, 'X3'=135mm 'Z1'=245mm, 'Z2'=245mm, 'Z2'=578mm 'Y'= ±31mm, 'B'=620mm, 'C'=0.001° (Increment). Rapid Traverse 'X1/X2'=16m/min, 'Z1/Z2'=40m/min, 'Y'=6m/min, 'B'=40m/min, 'C'=600rpm. Maximum Main Spindle Speed 6,000rpm (11/7.5kW Motor), Spindle Nose A2-5, Maximum Sub Spindle Speed 6,000rpm (11/7.5kW Motor), Spindle Nose A2-5. Spindle Through Bores Ø56mm. Maximum Driven Tooling Speed 6,000rpm (7.1/2.2kW Motor). Upper/Lower Dodecagonal Drum Turret Positions 12, No. Of Indexing Positions 24. Turning Tool Shank 20 x 20, Boring Bar Ø25mm. FMB Turbo 5-55/3200A Barfeeder Length 4,400mm. Barfeeder S/No. 25-291267 R1255198 (2015). Machine S/No. V104105 (2015).
  • 0_1_67e2d0f7-3a43-4e88-870f-759857b57263.jpg
    IMG_4481.JPEG
    IMG_4482.JPEG
    IMG_4483.JPEG
    IMG_4484.JPEG
    IMG_4485.JPEG
    IMG_4487.JPEG
    IMG_4488.JPEG
    IMG_4489.JPEG
    IMG_4490.JPEG
    IMG_4491.JPEG
    IMG_4492.JPEG
    IMG_4493.JPEG
    IMG_4494.JPEG
    IMG_4496.JPEG
    IMG_4497.JPEG
    IMG_4498.JPEG
    IMG_4499.JPEG
    IMG_4500.JPEG
    IMG_4501.JPEG
    IMG_4502.JPEG
    IMG_4503.JPEG
    IMG_4504.JPEG
    IMG_4505.JPEG
    IMG_4506.JPEG
    IMG_4507.JPEG
    IMG_4508.JPEG
    IMG_4509.JPEG
    IMG_4510.JPEG
    IMG_4511.JPEG
    IMG_4512.JPEG
    IMG_4513.JPEG
    IMG_4514.JPEG
    IMG_4515.JPEG
    IMG_4516.JPEG
    IMG_4517.JPEG
    IMG_4518.JPEG
    IMG_4519.JPEG
    IMG_4520.JPEG
    IMG_4521.JPEG
    IMG_4522.JPEG
    IMG_4523.JPEG
    IMG_4524.JPEG
    IMG_4525.JPEG
    IMG_4526.JPEG
    IMG_4527.JPEG
     site
    LOT 3

    2022 Star SB-20R Type G CNC Sliding Head Machine with Fanuc Series Oi-TF Control & FMB Turbo 2/20/3200A Bar Feeder

    Maximum Machining Ø20mm. Maximum Headstock Stroke 205mm. Maximum Main Spindle Speed 10,000rpm (3.7kW Motor). No. Of Turning Tools 6. 4 Spindle Sleeve Holder (4 Front/4 Rear), Maximum Drilling Ø12mm, Maximum Tapping M10. 4 Vertical Cross Driven Tools, Maximum Drilling Ø7mm, Maximum Tapping M6, Maximum Spindle Speed 6,000rpm (1.2kW Motor). Rapid Feedrate 35m/min (X1,Y1,Z1,X2,Z2). Back Working- Maximum Chucking Ø20mm. Maximum Length For Front Ejection 80mm. Maximum Parts Projection Length 30mm. 4 Horizontal Driven Tools, Maximum Drilling Ø6mm, Maximum Tapping M5, Stationary Maximum Drilling Ø8mm, Maximum Tapping M6. Maximum Spindle Speed 8,000rpm (0.75kW Motor). Maximum Sub Spindle Speed 9,000rpm (1.1kW Motor). FMB Turbo 2/20 Barfeeder Length 4,200mm. S/No. 22-301900 R1972579 (2022). Machine S/No. 11291 (2022).
  • 0_1_4bbe6905-8b52-4ae6-91b9-67b32196faa9.jpg
    IMG_4529.JPEG
    IMG_4530.JPG
    IMG_4531.JPG
    IMG_4533.JPEG
    IMG_4534.JPG
    IMG_4535.JPG
    IMG_4536.JPG
    IMG_4537.JPG
    IMG_4538.JPG
    IMG_4539.JPG
    IMG_4540.JPG
    IMG_4541.JPG
    IMG_4542.JPEG
    IMG_4543.JPG
    IMG_4544.JPG
    IMG_4545.JPG
    IMG_4546.JPG
    IMG_4547.JPG
    IMG_4548.JPG
    IMG_4549.JPG
    IMG_4550.JPG
    IMG_4551.JPG
    IMG_4552.JPG
    IMG_4553.JPG
    IMG_4554.JPG
    IMG_4555.JPG
    IMG_4556.JPEG
    IMG_4557.JPG
    IMG_4558.JPEG
    IMG_4559.JPG
    IMG_4560.JPG
    IMG_4561.JPG
    IMG_4562.JPG
    IMG_4563.JPG
    IMG_4564.JPG
    IMG_4565.JPG
    IMG_4566.JPG
    IMG_4568.JPG
    IMG_4607.JPG
     site
    LOT 4

    2012 Star SB-20 Type E CNC Sliding Head Machine with Fanuc Series Oi-TD Control & FMB Turbo 2/20/3200A Bar Feeder

    Maximum Machining Ø20mm. Maximum Headstock Stroke 183mm. Maximum Main Spindle Speed 10,000rpm (3.7kW Motor). No. Of Turning Tools 6. 4 Spindle Sleeve Holder (4 Front/4 Rear), Maximum Drilling Ø12mm, Maximum Tapping M10. 4 Vertical Cross Driven Tools, Maximum Drilling Ø7mm, Maximum Tapping M6, Maximum Spindle Speed 6,000rpm (1.2kW Motor). Rapid Feedrate 35m/min (X1,Y1,Z1,X2,Z2). Back Working- Maximum Chucking Ø20mm. Maximum Length For Front Ejection 80mm. Maximum Parts Projection Length 30mm. 4 Horizontal Driven Tools, Maximum Drilling Ø6mm, Maximum Tapping M5, Stationary Maximum Drilling Ø8mm, Maximum Tapping M6. Maximum Spindle Speed 8,000rpm (0.75kW Motor). Maximum Sub Spindle Speed 9,000rpm (1.1kW Motor). FMB Turbo 2/20 Barfeeder Length 4,200mm. S/No. 12-300356 R1042621 (2012). Machine S/No. 1077 (2012).
  • 0_1_8f529cac-f834-4eef-ba1e-499b9273c0b3.jpg
    IMG_4569.JPEG
    IMG_4570.JPG
    IMG_4571.JPG
    IMG_4572.JPG
    IMG_4574.JPG
    IMG_4575.JPG
    IMG_4576.JPG
    IMG_4577.JPG
    IMG_4578.JPG
    IMG_4579.JPG
    IMG_4580.JPG
    IMG_4581.JPG
    IMG_4582.JPG
    IMG_4583.JPG
    IMG_4585.JPG
    IMG_4586.JPEG
    IMG_4587.JPG
    IMG_4588.JPG
    IMG_4589.JPG
    IMG_4590.JPG
    IMG_4591.JPG
    IMG_4592.JPG
    IMG_4593.JPG
    IMG_4594.JPG
    IMG_4595.JPG
    IMG_4596.JPG
    IMG_4597.JPG
    IMG_4598.JPG
    IMG_4599.JPG
    IMG_4600.JPG
    IMG_4601.JPG
    IMG_4602.JPG
    IMG_4603.JPG
    IMG_4604.JPG
    IMG_4605.JPG
     site
    LOT 5

    2011 Star SB-20 Type E CNC Sliding Head Machine with Fanuc Series Oi-TD Control & FMB Minimag 20/3200A Bar Feeder

    Maximum Machining Ø20mm. Maximum Headstock Stroke 183mm. Maximum Main Spindle Speed 10,000rpm (3.7kW Motor). No. Of Turning Tools 6. 4 Spindle Sleeve Holder (4 Front/4 Rear), Maximum Drilling Ø12mm, Maximum Tapping M10. 4 Vertical Cross Driven Tools, Maximum Drilling Ø7mm, Maximum Tapping M6, Maximum Spindle Speed 6,000rpm (1.2kW Motor). Rapid Feedrate 35m/min (X1,Y1,Z1,X2,Z2). Back Working- Maximum Chucking Ø20mm. Maximum Length For Front Ejection 80mm. Maximum Parts Projection Length 30mm. 4 Horizontal Driven Tools, Maximum Drilling Ø6mm, Maximum Tapping M5, Stationary Maximum Drilling Ø8mm, Maximum Tapping M6. Maximum Spindle Speed 8,000rpm (0.75kW Motor). Maximum Sub Spindle Speed 9,000rpm (1.1kW Motor). FMB Turbo 2/20 Barfeeder Length 4,200mm. S/No. 01-310295 R882846 (2011). Machine S/No. 0220 (2011).
  • IMG_4608.JPEG
    IMG_4609.JPEG
    IMG_4610.JPEG
    IMG_4611.JPG
    IMG_4612.JPG
    IMG_4613.JPG
    IMG_4614.JPG
     site
    LOT 6

    Abac Air Compressors Genesis 15* 270 Air Screw Compressor

    Max Working Pressure 10 Bar. FAD Capacity 2,330 l/min. Vessel dimension 270 Litre. 15kW Motor. S/No. ITJ103651 (2017).
  • IMG_4615.JPEG
    IMG_4616.JPG
    IMG_4617.JPG
    IMG_4618.JPG
    IMG_4619.JPG
     site
    LOT 7

    Boge C20 LDR Air Screw Compressor With Air Dryer & BWB Air Vessel

    Maximum Working Pressure 10bar. 15kw Motor. FAD Flow Rate: 2,220 l/min.
  • IMG_4620.JPEG
    IMG_4621.JPEG
    IMG_4622.JPG
    IMG_4623.JPG
    IMG_4624.JPG
    IMG_4625.JPG
    IMG_4626.JPG
    IMG_4627.JPG
    IMG_4628.JPG
    IMG_4629.JPG
    IMG_4630.JPG
    IMG_4631.JPG
     site
    LOT 8

    Bridgeport BR2J2 Turret Milling Machine

    Table Dimension Approx 1,067mm x 227mm (3 'T' Slots). Longitudinal Table Travel Approx 736mm. Cross Travel Approx 304mm. Vertical Travel (Knee) Approx 400mm. Quill Travel 125mm. Ram Travel Approx 315mm. Spindle Centre to Column Face: Minimum Distance Approx 170mm - Max Approx 476mm. Spindle To Table Approx 64mm Min - 470mm Max. Table to Spindle Nose Gauge Line Approx 55mm. Max Workpiece Weight Approx 340kg. R8 Taper. High Range/Low Range Switch 70-3,750rpm. Right Hand & Left Hand Head Tilt = 90° Forward & Backward Head Tilt = 45°.
  • IMG_4632.JPEG
    IMG_4633.JPG
    IMG_4634.JPG
    IMG_4635.JPG
    IMG_4636.JPG
    IMG_4637.JPG
    IMG_4638.JPG
    IMG_4639.JPG
    IMG_4640.JPG
    IMG_4641.JPEG
    IMG_4642.JPEG
    IMG_4643.JPG
    IMG_4644.JPG
    IMG_4747.JPEG
    IMG_4748.JPEG
    IMG_4749.JPEG
     site
    LOT 9

    Colchester Bantam Capstan Lathe

    Ø130mm 3 Jaw Chuck. 300mm Turret Travel. Ø27mm Through Spindle Bore. Speed Range 36-800rpm. 5 Position Turret. QTC.
  • IMG_4645.JPEG
    IMG_4646.JPG
    IMG_4647.JPG
    IMG_4648.JPG
    IMG_4649.JPG
    IMG_4650.JPEG
    IMG_4651.JPG
    IMG_4745.JPEG
    IMG_4746.JPEG
    IMG_4888.JPG
     site
    LOT 10

    Jones & Shipman 540 Surface Grinder

    Working Surface Of Table 457 x 152mm. Longitudinal Table Traverse 483mm. Cross Table Travel 168mm. Vertical Movement Of Wheel Head 280mm. Maximum Wheel Speed 3,000rpm (1.5kW Motor). Magnetic Chuck Dimension 355 x 152mm. With Extraction Unit, Toolmakers Vice, Angle Plate & Diamond Dresser.
  • IMG_4652.JPEG
    IMG_4653.JPEG
    IMG_4654.JPG
    IMG_4655.JPG
    IMG_4656.JPG
    IMG_4657.JPG
    IMG_4658.JPG
     site
    LOT 11

    Brown & Sharpe No.2 Surface Grinder

    Eclipse Magnetic Chuck Dimension 450 x 152mm.
  • IMG_4659.JPEG
    IMG_4660.JPEG
    IMG_4661.JPG
    IMG_4662.JPEG
    IMG_4663.JPG
    IMG_4664.JPG
    IMG_4665.JPG
     site
    LOT 12

    Medding L2/F/1PH Pedestal Drill

    Rise & Fall Table Dimension 273 x 254mm. Throat Dimension 195mm. Speed Range 500-4,000rpm (0.37kW Motor). Voltage 230V. S/No. 535627.
  • IMG_4666.JPEG
    IMG_4667.JPEG
    IMG_4668.JPG
    IMG_4669.JPEG
    IMG_4670.JPEG
     site
    LOT 13

    Freddy Super Minor

    Drawbar Power 78 Newtons. Voltage 240V. S/No. 120717/6624 (2012).
  • IMG_4671.JPEG
    IMG_4672.JPG
    IMG_4673.JPG
    IMG_4674.JPG
    IMG_4675.JPG
    IMG_4676.JPG
    IMG_4677.JPG
    IMG_4678.JPG
    IMG_4679.JPG
    IMG_4680.JPG
     site
    LOT 14
  • IMG_4681.JPEG
    IMG_4682.JPEG
    IMG_4683.JPG
    IMG_4684.JPG
    IMG_4685.JPG
    IMG_4686.JPEG
     site
    LOT 15

    Rousselt Swarf/Oil Separator

    Bowl Dimension Ø1,200 x 600mm DP.
  • IMG_4692.JPEG
    IMG_4693.JPEG
    IMG_4694.JPEG
    IMG_4695.JPG
    IMG_4696.JPG
    IMG_4697.JPG
    IMG_4885.JPG
    IMG_4886.JPG
     site
    LOT 16

    Centrifugal Swarf/Oil Separator

    Bowl Dimension Ø580 x 300mm DP.
  • IMG_4707.JPEG
    IMG_4708.JPG
    IMG_4709.JPEG
    IMG_4710.JPG
    IMG_4711.JPG
    IMG_4712.JPG
    IMG_4713.JPG
    IMG_4714.JPG
    IMG_4715.JPG
    IMG_4716.JPEG
    IMG_4717.JPG
    IMG_4718.JPEG
    IMG_4719.JPG
    IMG_4720.JPEG
    IMG_4721.JPEG
    IMG_4722.JPEG
    IMG_4723.JPG
    IMG_4724.JPG
     site
    LOT 17

    Heavy Duty Steel Material Rack With Contents Of Bar Stock

    Overall Dimensions L1,600 x W2,000 x H1,000mm. Stock Bar Includes Aluminium, Stainless Steel, Mild Steel. Round Bar & Hexagon Bar In Various Sizes Ø3-50mm Upto 3m In Length.
  • IMG_4687.JPEG
    IMG_4688.JPG
    IMG_4689.JPG
    IMG_4690.JPG
    IMG_4691.JPG
     site
    LOT 18

    Floor Mounted Jib Crane With U-Mega UH-110 1 Ton Hoist

    Approx Span 3,250mm. Approx Height Under Beam 3,330mm. With Pendant Control & Chain Hoist.
  • IMG_4698.JPEG
    IMG_4699.JPG
    IMG_4700.JPG
    IMG_4701.JPG
     site
    LOT 19

    Mobile Atlas Copco TE 08 Compressor

    Working Pressure 10bar. Motor Speed 1,800rpm.
  • IMG_4702.JPEG
    IMG_4703.JPEG
    IMG_4704.JPG
    IMG_4705.JPG
    IMG_4706.JPG
     site
    LOT 20
  • IMG_4755.JPEG
    IMG_4756.JPEG
    IMG_4757.JPEG
    IMG_4758.JPEG
     site
    LOT 21
  • IMG_4759.JPEG
    IMG_4760.JPEG
    IMG_4761.JPEG
    IMG_4762.JPEG
     site
    LOT 22
  • IMG_4763.JPEG
    IMG_4764.JPEG
    IMG_4765.JPEG
    IMG_4766.JPEG
     site
    LOT 23
  • IMG_4767.JPEG
    IMG_4768.JPEG
    IMG_4769.JPEG
    IMG_4770.JPEG
     site
    LOT 24
  • IMG_4771.JPEG
    IMG_4772.JPEG
    IMG_4773.JPG
    IMG_4774.JPG
     site
    LOT 25

    Rexon BD150BQ Universal Bench Grinder

    Belt Width 25mm. Disc Ø130mm. Voltage 240V.
  • IMG_4775.JPG
    IMG_4776.JPG
    IMG_4777.JPG
    IMG_4778.JPG
    IMG_4779.JPG
     site
    LOT 26
  • IMG_4780.JPEG
    IMG_4781.JPG
     site
    LOT 27
  • IMG_4782.JPG
    IMG_4783.JPEG
     site
    LOT 28
  • IMG_4784.JPG
    IMG_4785.JPG
    IMG_4786.JPEG
     site
    LOT 29
  • IMG_4787.JPG
    IMG_4788.JPG
     site
    LOT 30
  • IMG_4789.JPG
    IMG_4790.JPG
     site
    LOT 31
  • IMG_4791.JPG
    IMG_4792.JPG
    IMG_4793.JPG
     site
    LOT 32
  • IMG_4794.JPG
    IMG_4795.JPEG
     site
    LOT 33
  • IMG_4796.JPG
    IMG_4797.JPG
     site
    LOT 34
  • IMG_4798.JPG
    IMG_4799.JPG
    IMG_4800.JPG
    IMG_4801.JPEG
     site
    LOT 35

    Tombola Parts Cleaner

    Ø320mm x 415mm Wide.
  • IMG_4802.JPEG
    IMG_4803.JPG
    IMG_4804.JPG
     site
    LOT 36
  • IMG_4805.JPEG
    IMG_4806.JPG
    IMG_4807.JPG
     site
    LOT 37
  • IMG_4808.JPG
    IMG_4809.JPG
    IMG_4810.JPG
     site
    LOT 38
  • IMG_4811.JPG
    IMG_4812.JPEG
    IMG_4813.JPEG
     site
    LOT 39
  • IMG_4814.JPG
    IMG_4815.JPG
     site
    LOT 40
  • IMG_4816.JPG
    IMG_4817.JPG
     site
    LOT 41
  • IMG_4818.JPG
    IMG_4819.JPG
     site
    LOT 42
  • IMG_4820.JPEG
    IMG_4821.JPG
    IMG_4822.JPG
     site
    LOT 43
  • IMG_4823.JPG
    IMG_4824.JPG
    IMG_4825.JPG
     site
    LOT 44

    Black Wall Mounted Double Ended Grinder

    Wheel Ø150mm. Power 200W. Voltage 230V.
  • IMG_4826.JPEG
    IMG_4827.JPG
    IMG_4828.JPG
     site
    LOT 45
  • IMG_4829.JPEG
    IMG_4830.JPEG
     site
    LOT 46
  • IMG_4831.JPG
    IMG_4832.JPEG
     site
    LOT 47
  • IMG_4833.JPG
    IMG_4834.JPEG
     site
    LOT 48
  • IMG_4835.JPG
    IMG_4836.JPEG
     site
    LOT 49
  • IMG_4837.JPG
    IMG_4838.JPEG
     site
    LOT 50
  • IMG_4839.JPG
    IMG_4840.JPG
     site
    LOT 51
  • IMG_4841.JPEG
    IMG_4842.JPEG
     site
    LOT 52
  • IMG_4843.JPG
    IMG_4844.JPEG
    IMG_4845.JPEG
     site
    LOT 53
  • IMG_4846.JPEG
    IMG_4847.JPEG
    IMG_4848.JPEG
     site
    LOT 54
  • IMG_4849.JPG
    IMG_4850.JPG
    IMG_4851.JPG
     site
    LOT 55
  • IMG_4852.JPG
    IMG_4853.JPG
    IMG_4854.JPG
     site
    LOT 56
  • IMG_4855.JPEG
    IMG_4856.JPEG
     site
    LOT 57
  • IMG_4857.JPG
    IMG_4858.JPEG
     site
    LOT 58
  • IMG_4859.JPG
    IMG_4860.JPEG
     site
    LOT 59
  • IMG_4861.JPG
    IMG_4862.JPEG
     site
    LOT 60
  • IMG_4863.JPG
    IMG_4864.JPEG
     site
    LOT 61
  • IMG_4865.JPG
    IMG_4866.JPEG
    IMG_4867.JPEG
     site
    LOT 62
  • IMG_4868.JPEG
    IMG_4869.JPG
    IMG_4870.JPG
     site
    LOT 63
  • IMG_4871.JPG
    IMG_4872.JPG
    IMG_4873.JPG
     site
    LOT 64

    Ae Adam Digital Scales

    Maximum Weight 32kg. Minimum Increment 1g.
  • IMG_4874.JPEG
    IMG_4875.JPEG
    IMG_4876.JPG
    IMG_4877.JPEG
    IMG_4878.JPG
     site
    LOT 65
  • IMG_4879.JPEG
    IMG_4880.JPG
    IMG_4881.JPG
    IMG_4882.JPG
    IMG_4883.JPG
     site
    LOT 66
  • IMG_4884.JPG
     site
    LOT 67
  • IMG_4889.JPG
    IMG_4890.JPG
    IMG_4891.JPG
     site
    LOT 68
  • IMG_4892.JPG
    IMG_4893.JPG
    IMG_4894.JPG
     site
    LOT 69
  • IMG_4895.JPG
    IMG_4896.JPEG
     site
    LOT 70
  • IMG_4897.JPG
    IMG_4898.JPG
    IMG_4899.JPG
     site
    LOT 71
  • IMG_4900.JPEG
    IMG_4901.JPG
     site
    LOT 72

    Steel Fabricated Wooden Topped Workbench

    Overall Dimensions L1,830 x W770 x H870mm.
  • IMG_4902.JPEG
    IMG_4903.JPEG
     site
    LOT 73
  • IMG_4905.JPEG
    IMG_4906.JPEG
    IMG_4907.JPEG
     site
    LOT 74
  • IMG_4908.JPG
    IMG_4909.JPG
    IMG_4910.JPG
    IMG_4911.JPG
     site
    LOT 75
  • IMG_4915.JPEG
    IMG_4916.JPG
    IMG_4917.JPG
     site
    LOT 76

    counting E-Scale Digital Scales Model CAM-6A

    Maximum Weight 6kg. Minimum Increment 0.1g.
  • IMG_4912.JPG
    IMG_4913.JPEG
    IMG_4914.JPG
     site
    LOT 77
  • IMG_4918.JPEG
    IMG_4919.JPEG
    IMG_4920.JPEG
    IMG_4921.JPEG
     site
    LOT 78
  • IMG_4922.JPG
    IMG_4923.JPG
     site
    LOT 79

    Cast Iron Surface Table

    Overall Dimensions L615 x W615 x H95mm.
  • IMG_4924.JPG
    IMG_4925.JPG
    IMG_4926.JPG
     site
    LOT 80
  • IMG_4927.JPG
    IMG_4928.JPG
    IMG_4929.JPG
    IMG_4930.JPG
    IMG_4931.JPG
    IMG_4932.JPG
     site
    LOT 81
  • IMG_4933.JPG
    IMG_4934.JPG
    IMG_4935.JPG
    IMG_4936.JPG
    IMG_4937.JPEG
     site
    LOT 82
  • IMG_4938.JPEG
    IMG_4939.JPEG
    IMG_4940.JPG
     site
    LOT 83
  • IMG_4941.JPG
    IMG_4942.JPG
    IMG_4943.JPEG
    IMG_4944.JPEG
    IMG_4945.JPEG
    IMG_4946.JPEG
     site
    LOT 84
  • IMG_4947.JPG
    IMG_4948.JPG
     site
    LOT 85
  • IMG_4949.JPG
    IMG_4950.JPG
    IMG_4951.JPEG
    IMG_4952.JPEG
     site
    LOT 86
  • IMG_4953.JPG
    IMG_4954.JPG
     site
    LOT 87

    Single Door Coshh Cabinet

    Overall Dimensions L350 x W310 x H705mm.
  • IMG_4958.JPG
    IMG_4959.JPEG
    IMG_4960.JPEG
     site
    LOT 88
  • 89.jpg
     site
    LOT 89
  • 90.jpg
     site
    LOT 90
  • 91.jpg
     site
    LOT 91
  • 92.jpg
     site
    LOT 92

Essential Information

General Information

Auction Dates
Starts: 22 July 2025 at 09:00 BST
Ends: 11 September 2025 at 15:00 BST
Site Address
UNIT 10 SCHOONERS BUSINESS PARK
TRENANTS INDUSTRIAL ESTATE
WADEBRIDGE
CORNWALL
PL27 6HB
United Kingdom
Viewing Days
By Appointment Only
Viewings strictly by appointment only – Please contact Apex to make an appointment.

Fees & Payment

Currency
GBP
Buyers Premium
18% or as specified on individual items
Payment

General payment information

  • Payment is due immediately on receipt of invoice.
  • All payments must be made in the currency on the invoice issued.
  • Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.

Goods

Clearance days
22 September 2025 at 09:00 BST - 03 October 2025 at 16:00 BST
Collections strictly by appointment only.
General Collection Information

Collection

  • Buyers are fully responsible for removal of items plus all shipping and rigging charges.
  • Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
  • Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
  • Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
  • Contact and removal information will be emailed at the time invoices are issued.
Sales Contacts
Auction information
Sue Sykes
Apex Auctions
69 Middle Street
Brighton
BN1 1AL
United Kingdom

 

+44 (0)1273 224466