Closure & Retirement Sale – Doosan Puma GT2100 & Lynx 220B CNC Lathes, Bridgeport VMC1000/22 & Workshop Machinery
Starts: 27 July 2026 at 09:00 BST
Ends: 16 September 2026 at 15:00 BST
Retirement closure of CNC machinery and equipment. Machines are still under power, should you wish to inspect please contact Apex. Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 8 of 8 lots
- LOT 1
![site]()
Doosan Puma GT2100 CNC Slant Bed Lathe With Doosan-Fanuc I Series Control
With Samchully MH-208 V1 Ø203mm 3 Jaw Power Chuck. Maximum Swing Ø600mm. Maximum Swing Over Cross Slide Ø390mm. Maximum Turning Ø390mm. Maximum Turning Length 562mm. Bar Capacity Ø65mm. Axis Travel 'X'=230mm, 'Z'=580mm. Rapid Feedrates 'X'=24m/min, 'Z'=30m/min. Spindle Nose A2-6. Maximum Spindle Speed 4,500rpm (18.5kW Motor). 12 Station Turret. Programmable Tailstock Travel 580mm, Tailstock Quill Ø80mm, Quill Travel 80mm, Taper MT4. Tool Shank 25 x 25mm. S/No. ML0228-001618 (2017). Note: Low Running Hours 2,728. - LOT 2
![site]()
Doosan Lynx 220B CNC Slant Bed Lathe With Doosan-Fanuc I Series Control
With Ø135mm Collet Chuck. Maximum Swing Ø510mm. Maximum Swing Over Cross Slide Ø290mm. Maximum Turning Ø320mm. Maximum Turning Length 305mm. Bar Capacity Ø51mm. Axis Travel 'X'=175mm, 'Z'=330mm. Rapid Feedrates 'X'=30m/min, 'Z'=36m/min. Spindle Nose A2-6. Maximum Spindle Speed 5,000rpm (15kW Motor). Spindle Nose A2-6. Spindle Through Bore Ø61mm. 12 Station Turret. Tailstock Quill Ø80mm, Quill Travel 80mm, Taper MT4. Tool Shank 25 x 25mm. Boring Bar Sleeve Ø40mm. S/No. ML0014-005414 (2012). Low Running Hours 7,360. - LOT 3
![site]()
Bridgeport VMC1000/22 Digital CNC Vertical Machining Centre With Heidenhain 426CB Control
Table Dimension 1,150mm x 490mm (3 'T' Slots). Axis Travel 'X'=1,020mm, 'Y'=600mm, 'Z'=560mm. 22 Position ATC. Spindle Taper BT40. Maximum Spindle Speed 6,000rpm (11kW Motor). Spindle Taper BT40. S/No. 82135 (1996). - LOT 4
![site]()
Ajax Cleveland No.2 Universal Milling Machine
Swivel Table Dimension 1,400 x 340mm (3 Slots). Approx Axis Travel 'X'=1,100mm, 'Y'=330mm, 'Z'=450mm. Spindle Taper ISO40. Spindle Speed Range (18) 28-1,400rpm. S/No. - LOT 5
![site]()
Jones & Shipman Grinder
Table Dimension 18 x 6". Magnetic Chuck Dimension 356 x 152mm. Wheel Dimension Ø175 x 12mm. - LOT 6
![site]()
Herbert 4 Spindle Drilling Machine
Rise & Fall Table Dimension 1,170 x 390mm (2 'T' Slots). Throat 195mm. Speed Range (5) 104-562rpm & (5) 446-2,415mm. Spindle Taper MT2 & MT3. Voltage 440V. - LOT 7
![site]()
Herbert 4 Senior Preoptive Capstan Lathe
Maximum Bar Ø50.8mm. Maximum Swing Over Bed 390mm. Maximum Swing Over Cross Slide Ø225mm. Spindle Bore Ø54mm. Spindle To Turret Face Distance 832mm. Number Of Spindle Speeds 16, Speed Range 32-1,500rpm. Number Of Feeds 12, Feed Rate Range 0.051-0.838mm/rev. Drive Main Motor Power 7.5/3 hp. Note: Gear Selector Needs Attention. - LOT 8
![site]()
BSA Centreless Grinder
Wheel Dimensions Ø340 x 102mm & Ø220 x 102mm. 10 HP Motor. With Coolant System. Note: Electrical Issue Needs Attention.
Essential Information
General Information
- Auction Dates
- Starts: 27 July 2026 at 09:00 BSTEnds: 16 September 2026 at 15:00 BST
- Site Address
- 4 SOAR RDLOUGHBOROUGHLE12 8BNUnited Kingdom
- Viewing Days
- By Appointment OnlyViewings strictly by appointment only – Please contact Apex to make an appointment.
Fees & Payment
- Currency
- GBP
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- Payment is due immediately on receipt of invoice.
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.
Goods
- Clearance days
- 21 September 2026 at 09:00 BST - 09 October 2026 at 16:00 BSTCollections strictly by appointment only.
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all shipping and rigging charges.
- Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- Sales Contacts
- Auction informationSue SykesApex Auctions
69 Middle Street
Brighton
BN1 1AL
United Kingdom [email protected]+44 (0)1273 224466