Bridgeport VMC, XYZ Proturn CNC Lathe & Industrial Equipment Sale Surplus To Requirements

Starts: 09 June 2026 at 13:00 BST
Ends: 07 July 2026 at 15:00 BST
Surplus to requirements of ongoing business. Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Register for auctionEssential Information
Share:
Showing 10 of 10 lots
  • IMG_6308.JPEG
    IMG_6309.JPG
    IMG_6310.JPEG
    IMG_6311.JPEG
    IMG_6312.JPG
    IMG_6313.JPG
    IMG_6314.JPG
    IMG_6315.JPEG
    IMG_6316.JPG
    IMG_6317.JPG
    IMG_6318.JPG
    IMG_6319.JPG
    IMG_6320.JPG
    IMG_6321.JPG
    IMG_6322.JPG
    IMG_6323.JPG
    IMG_6324.JPG
    IMG_6325.JPG
    IMG_6326.JPG
    site
    LOT 1

    Bridgeport VMC 800/22 CNC Vertical Machining Centre With Heidenhein TNC 426 Control

    Table Dimension 1,000 x 490mm (5 'T' Slots). Maximum Table Load 750kg. Axis Travel 'X'=800mm, 'Y'=510mm, 'Z'=500mm. Maximum Spindle Speed 6,000rpm (11kW Motor). Spindle Taper BT40. 22 Position ATC. S/No. 720971 (1997).
    View Item
  • IMG_6341.JPEG
    IMG_6342.JPG
    IMG_6343.JPEG
    IMG_6344.JPG
    IMG_6345.JPG
    IMG_6346.JPG
    IMG_6347.JPG
    IMG_6348.JPG
    IMG_6349.JPG
    IMG_6350.JPG
    IMG_6351.JPG
    IMG_6352.JPG
    IMG_6353.JPG
    IMG_6354.JPG
    IMG_6355.JPG
    IMG_6356.JPEG
    IMG_6357.JPEG
    IMG_6358.JPG
    site
    LOT 2

    XYZ Proturn VL 425 CNC Straight Gap Bed Lathe With ProtoTRAK VL Control

    Ø250mm 3 Jaw Chuck. Swing Over Bed Ø480mm. Swing Over Gap Ø700mm. Swing Over Cross Slide Ø257mm. Distance Between Centres 1,250mm. Spindle Bore Ø80mm. Speed Ranges 252,500rpm (3 Ranges). Quick Change Toolpost. Tailstock Quill Ø75mm, Quill Travel 160mm, Taper MT5. S/No. L246.
    View Item
  • IMG_6285.JPG
    IMG_6286.JPG
    IMG_6287.JPG
    IMG_6288.JPG
    IMG_6289.JPG
    IMG_6290.JPG
    IMG_6291.JPG
    site
    LOT 3

    SPARC Systems GW420 Grader/Weigher System

    Conveyor Belt Width 300mm. Infeed Length 500mm Centres. Weighing Length 500mm Centres. Voltage 230V. S/No. S20W26024.
    View Item
  • IMG_6285.JPG
    IMG_6286.JPG
    IMG_6287.JPG
    IMG_6288.JPG
    IMG_6289.JPG
    IMG_6290.JPG
    site
    LOT 4

    SPARC Systems GW420 Grader/Weigher System

    Conveyor Belt Width 300mm. Infeed Length 500mm Centres. Weighing Length 500mm Centres. Voltage 230V.
    View Item
  • IMG_6327.JPEG
    IMG_6328.JPG
    IMG_6329.JPG
    IMG_6330.JPG
    IMG_6331.JPG
    IMG_6332.JPG
    IMG_6333.JPG
    IMG_6334.JPG
    IMG_6335.JPG
    IMG_6336.JPG
    IMG_6337.JPG
    IMG_6338.JPG
    IMG_6339.JPEG
    IMG_6340.JPG
    site
    LOT 5

    Harrison M300 Gap Bed Centre Lathe With Goodwin DROII-2L DRO

    Ø160mm 3 Jaw Chuck. Swing Over Bed Ø330mm. Swing Over Cross Slide Ø210mm. Swing Over Gap Ø480 x 117mm. Distance Between Centres 635mm. Spindle Speeds 33-2,500mm (Motor 5.5kW). Spindle Bore Ø40mm. Tailstock Quill Ø42mm, Travel 110mm, Taper MT3. QTC. S/No. 351395.
    View Item
  • IMG_6292.JPG
    IMG_6293.JPG
    IMG_6294.JPG
    IMG_6295.JPG
    IMG_6296.JPG
    IMG_6297.JPG
    IMG_6298.JPG
    IMG_6299.JPG
    IMG_6300.JPG
    IMG_6301.JPG
    IMG_6302.JPG
    IMG_6303.JPG
    IMG_6304.JPG
    IMG_6305.JPG
    IMG_6306.JPG
    IMG_6307.JPG
    site
    LOT 6

    Swift 4VS-SQ Turret Mill with Goodwin DROII-2M 2 Axis DRO

    Table Dimension 1,370 x 253mm (3 'T' Slots). Axis Travel Longitudinal 840mm, Cross 350mm, Vertical (Knee) 400mm. Quill Travel 125mm. Spindle Speed (2) Ranges 50-3,220rpm. Spindle Taper ISO 40. With Longitudinal & Cross Power Feeds. S/No. 94423.
    View Item
  • Picture10.png
    site
    LOT 7

    BT Rolatruc HWE100 Minimover Battery Powered Pallet Stacker

    Capacity 1,000kg. Maximum Lift Height 2,000mm. Maximum Travel Speed 5.4km/hr. S/No. 981689 (2007).
    View Item
  • Picture11.png
    site
    LOT 8

    Mobile Kemppi PSS3500 FU20 Tig/Mig/Arc Welding Set With Leads & Torches

    Feeder Type FU20. Cooling Type WU10. Maximum Welding Current 350A. Welding Current 60% 350A. Welding Current 100% 270A. Power Supply 380-415V.
    View Item
  • Picture12.png
    site
    LOT 9

    Hydrovane 711 Compressor

    Power 3-Phase, 11kW Motor (15 HP Equivalent). Output 70 Cubic Feet Per Minute Free Air Delivery At 10 bar Working Pressure.
    View Item
  • Picture13.png
    site
    LOT 10

    Nuair Airsil Compressor

    Power Single-Phase 240V 13A (Plug-In Domestic/Workshop Friendly), Motor 3HP (2.2 kW). Output 11 Cubic Feet Per Minute, Free Air Delivery At Typical 8–10 bar, 11–12.5 CFM Range Depending On Pressure.
    View Item

Essential Information

General Information

Auction Dates
Starts: 09 June 2026 at 13:00 BST
Ends: 07 July 2026 at 15:00 BST
Site Address
North Warren Road
Gainsborough
Lincolnshire
DN21 2TU
United Kingdom
Viewing Days
By Appointment Only

Fees & Payment

Currency
GBP
Buyers Premium
18% or as specified on individual items
Payment

General payment information

  • Payment is due immediately on receipt of invoice.
  • All payments must be made in the currency on the invoice issued.
  • Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.

Goods

Clearance days
13 July 2026 at 09:00 BST - 24 July 2026 at 16:00 BST
Collections strictly by appointment only.
General Collection Information

Collection

  • Buyers are fully responsible for removal of items plus all shipping and rigging charges.
  • Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
  • Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
  • Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
  • Contact and removal information will be emailed at the time invoices are issued.
Sales Contacts
Auction information
Anais Tournois
69 Middle Street
Brighton
Please Select
BN11AL
United Kingdom
 

+44 1273 224466