Additive and Support Equipment Surplus to Colibrium Additive

Starts: 15 October 2025 at 05:00 BST
Ends: 19 November 2025 at 18:00 GMT
Featuring: 2019 Friggi Soitaab VASH Traveling Head Vertical Bandsaw • (2) 2017 Never Used Envision TEC Let Perfactory IV LED Resin 3D Printers • 2018 Russell AMPro Type 35548 Automatic Powder Sieve Station • (4) 2017 Additec TriAx-M800L-1W-OP • (5) 2019 Stainless Steel Powder Hoppers • Powder Evac Systems • Stainless Steel 3D Printer Build Plates • (2) 8,000# Electric Pallet Jacks • JLG Liftpod Battery Powered Personnel Lift • Sand Blast Cabinets • Air Cleaners • Plus More!
Register for auctionEssential Information
Share:
Showing 24 of 24 lots
  • 19-1.jpeg
    19-2.jpeg
    19-3.jpeg
    19-4.jpeg
    19-5.jpeg
    19-6.jpeg
    19-7.jpeg
    site
    LOT 1

    2019 Friggi Soitaab Modal VASH Traveling Head Vertical Bandsaw, 48" Throat

    2019 Friggi Soitaab Modal VASH Traveling Head Vertical Bandsaw, 48" Throat, Approx. 60" Cutting Capacity, 93" Left to Right Head Travel, 55" x 139" Slotted Steel Table, Techimety Elevated Chip Conveyor, Operator Console with Mitsubishi PLC Operator Interface, Hydraulics, Safety Cage with Door Interlock, S/N: 5415
    View Item
  • 25-1.jpeg
    25-2.jpeg
    25-3.jpeg
    site
    LOT 2

    2017 Never Used EnvisionTEC LED Perfactory IV LED Mini XL DLP Resin 3D Printer

    2017 Never Used EnvisionTEC LED Perfactory IV LED Mini XL DLP Resin 3D Printer, 4.5” x 2.8” x 8.66” Build Envelope, 1920 x 1200 Pixels Projector Resolution, 0.0023” (60 µm) Native Pixel Size, S/N: ET.PM4-17.08.S061
    View Item
  • 26-1.jpeg
    26-2.jpeg
    26-3.jpeg
    26-4.jpeg
    site
    LOT 3

    2017 Never Used EnvisionTEC LED Perfactory IV LED Mini XL DLP Resin 3D Printer

    2017 Never Used EnvisionTEC LED Perfactory IV LED Mini XL DLP Resin 3D Printer, 4.5” x 2.8” x 8.66” Build Envelope, 1920 x 1200 Pixels Projector Resolution, 0.0023” (60 µm) Native Pixel Size, Lens F+236" (60MM) S/N: ET.PM4-17.08.S061
    View Item
  • 24-1.jpeg
    24-2.jpeg
    24-3.jpeg
    site
    LOT 4

    Stratasys Dimension BST1200es Fused Deposition Modeling 3D Printer (AS-IS)

    Stratasys Dimension BST1200es Fused Deposition Modeling 3D Printer (AS-IS)
    View Item
  • 12-1.jpeg
    12-2.jpeg
    12-3.jpeg
    12-4.jpeg
    12-5.jpeg
    12-6.jpeg
    12-7.jpeg
    site
    LOT 5

    2018 Russell AMPro Type 35548 Automatic Powder Sieve Station

    2018 Russell AMPro Type 35548 Automatic Powder Sieve Station, S/N: 58051-1/1-CS/2018
    View Item
  • 6-1.jpeg
    6-2.jpeg
    6-3.jpeg
    6-4.jpeg
    6-5.jpeg
    6-6.jpeg
    6-7.jpeg
    site
    LOT 6

    (5) Stainless Steel Build Plates

    (5) Stainless Steel Build Plates, Sizes Range: (5) 39.5" x 41.5" x 2", (8) 39.5" x 31.25" x 2", (3) 39.25" x 4.25" x 2" Plus Other Various Sizes
    View Item
  • 5-1.jpeg
    5-2.jpeg
    5-3.jpeg
    5-4.jpeg
    5-5.jpeg
    5-6.jpeg
    site
    LOT 7

    (5) 2019 Custom Powder Systems Model 61167 Stainless Steel Powder Hoppers, 52" x 52" x 16" Hopper

    (5) 2019 Custom Powder Systems Model 61167 Stainless Steel Powder Hoppers, 52" x 52" x 16" Hopper, Cone Bottom, 20" Wide Top Manhole Opening, Bottom Discharge, Fork Pockets, 658# Tare Weight, S/N's: 8350-SN-010, 8350-SN-003, 8350-SN-002, 8350-SN-007, 8350-SN-009
    View Item
  • 1-1.JPG
    site
    LOT 8

    (4) 2017 Additec TriAx-M800L-1W-OP Wire-Based Directed Energy Deposition Laser Heads

    (4) 2017 Additec TriAx-M800L-1W-OP Wire-Based Directed Energy Deposition Laser Head, 800-Watt, S/N: M200008-0818
    View Item
  • 31-1.png
    31-2.png
    site
    LOT 9

    2018 TA Instruments Model DIL821 Single Sample Pushrod Dilatometer

    2018 TA Instruments Model DIL821 Single Sample Pushrod Dilaometer, 1nm Resolution, 5mm Measuring Range, 0-25mm Sample Length, up to 10mm Sample Diameter, S/N: 10836
    View Item
  • 7-1.jpeg
    7-2.jpeg
    7-3.jpeg
    7-4.jpeg
    site
    LOT 10

    Yale Model MPW080LEN24T2742 8,000# Capacity Electric Walk Behind Straddle Lift, 24-Volt

    Yale Model MPW080LEN24T2742 8,000# Capacity Electric Walk Behind Straddle Lift, 24-Volt, Complete with Pendant Control, Superior Engineering Build Plate Transfer Table, S/N: B891N01692R
    View Item
  • 34-1.jpg
    34-2.jpg
    site
    LOT 11

    Raymond 8310 8,000# Capacity Electric Walk Behind Pallet Jack

    Raymond 8310 8,000# Capacity Electric Walk Behind Pallet Jack, 24V, S/N: 831-19-12242
    View Item
  • 20-1.jpeg
    20-2.jpeg
    20-3.jpeg
    20-4.jpeg
    20-5.jpeg
    20-6.jpeg
    20-7.jpeg
    site
    LOT 12

    JLG Liftpod FT70 Battery Powered Personnel Lift

    JLG Liftpod FT70 Battery Powered Personnel Lift, 7' Elevated Platform Height, 330# Load Capacity, 13' Maximum Working Height, Complete with JLG 40-Volt Lithium Battery, S/N: F010002803
    View Item
  • 22-1.jpeg
    22-2.jpeg
    22-3.jpeg
    site
    LOT 13

    2018 Enco Model 61118675 52" x 16GA Jump Shear

    2018 Enco Model 61118675 52" x 16GA Jump Shear with (2) Front Arm Extensions, Squaring Arm, S/N: F18030020
    View Item
  • 9-1.jpeg
    9-2.jpeg
    9-3.jpeg
    9-4.jpeg
    9-5.jpeg
    site
    LOT 14

    Redline Model SBC990 40" x 36" x 32" Reach-In Type Sand Blast Cabinet, Front Opening, Foot Pedal Controls

    Redline Model SBC990 40" x 36" x 32" Reach-In Type Sand Blast Cabinet
    View Item
  • 10-1.jpeg
    10-2.jpeg
    10-3.jpeg
    10-4.jpeg
    10-5.jpeg
    10-6.jpeg
    10-7.jpeg
    10-8.jpeg
    10-9.jpeg
    site
    LOT 15

    Wet Powder Evac Unit Complete with Custom Built Power Handling Containment Box

    Wet Powder Evac Unit Complete with Custom Built Power Handling Containment Box with 3-Side Gloves with Window, 60" x 60" x 45" High, 48" x 48" Steel Bearing Roller Table, Filter One Hydrotron Model HWF-3-30-5-MO-H 5-HP 2,000 CFM Dust Collector
    View Item
  • 27-1.png
    27-2.png
    site
    LOT 16

    2017 Busch Microsystems Gantry Type Positioning System

    2017 Busch Microsystems Gantry Type Positioning System, 3300mm x 3400mm, 2800mm, S/N: 2017-402442
    View Item
  • 28.png
    site
    LOT 17

    Voyager Electric Drum Lift

    Voyager Electric Drum Lift, A/N: 1932
    View Item
  • 28-1.png
    28-2.png
    site
    LOT 18

    Laguna Model CFLUX 2 2-HP Portable Cyclone Dust Collector

    Laguna Model CFLUX 2 2-HP Portable Cyclone Dust Collector, 46-Gallon Capacity, 1740 CFM, 14.5" Fan Size, 1166 CFM Shop Setting Airflow, 220V, 1Ph, 60HZ, S/N: 1637029
    View Item
  • 30-1.png
    site
    LOT 19

    Extract-All Model SC-1500 Portable Air Cleaner / Fume Extractor

    Extract-All Model SC-1500 Portable Fume Extractor, 1500 CFM, 99.995% at 0.3 microns Filter Efficiency
    View Item
  • 35-1.JPG
    35-2.JPG
    site
    LOT 20

    2005 Riedel PC 41.02-KE-S1 Chiller

    2005 Riedel PC 41.02-KE-S1 Chiller, R134a Refrigerant, S/N: 2KP0041002
    View Item
  • 36-1.JPG
    36-2.jpg
    site
    LOT 21

    Thermal Care EQ2W0303X 3-Ton Water Cooled Chiller

    Thermal Care EQ2W0303X 3-Ton Water Cooled Chiller, 8GPM, 11-Gallon Reservoir Capacity, R-22 Refrigerant, S/N: 06505010603
    View Item
  • Laserblow1.png
    site
    LOT 22

    Laser Blow Powder System

    Laser Blow Powder System
    View Item
  • site
    LOT 23

    Great Lakes Tanks Model 1986188 Vertival Air Storage Tank

    Great Lakes Tanks Model 1986188 Vertival Air Storage Tank
    View Item
  • 18-1.jpeg
    18-2.jpeg
    site
    LOT 24

    Never Used REYMSA Model PVK284TTTNA16603AAL 10-HP Severe Duty Continuous Run Motor

    Never Used REYMSA Model PVK284TTTNA16603AAL 10-HP 880 RPM 230/460V 3PH 60HZ Severe Duty Continuous Run Motor, S/N: M66087280-2 09/02-10
    View Item

Essential Information

General Information

Auction Dates
Starts: 15 October 2025 at 05:00 BST
Ends: 19 November 2025 at 18:00 GMT
Site Address
8556 Trade Center Drive
#100
West Chester
OH
45011
United States
Viewing Days
By Appointment Only
Contact us to schedule a site inspection.

Fees & Payment

Currency
USD
Buyers Premium
18% or as specified on individual items
Payment
General payment information
• Payment is due immediately upon receipt of the invoice.
• All payments must be made in the currency stated on the invoice.

Payment Terms
• Company Checks up to $3,000 USD
• Certified Checks over $3,000 USD
• Wire Transfer
• Money orders or cash will not be accepted.
• Credit Cards (3% Processing Fee will be Applied) (Call 631.418.8850 for CC Payment)

No payments will be accepted on-site; all payments need to be mailed to our office
Please make checks payable to

Apex Auctions USA
315 Walt Whitman Road
Huntington Station, NY 11746
Suite 207

Goods

Clearance days
24 November 2025 at 13:00 GMT - 12 December 2025 at 21:00 GMT
See clearance terms for approved rigging companies
General Collection Information
Machinery Movers
Type: Export Company
Company: Miami Global Lines
Contact: Hamid Hussaini
Phone:  848-219-7924
Email: quotes@miamigloballines.com
   
Type: Machinery Mover
Company: Foremans Machinery Movers
Contact: James Foreman
Phone:  561-234-8758
Email: james@foremansmm.com
   
Type: Machinery Mover
Company: SK Rigging
Contact: Brad Schneider
Phone:  513-771-7766
Email: bschneider@skrigging.com
• Buyers are fully responsible for the removal of items plus all shipping and rigging charges.
• Due to insurance regulations Apex will not supply a forklift, or other motorized rigging equipment to support loading, packaging, or shipping, unless specifically posted.
• Items are only available to collect once the transferred funds have cleared and a collection appointment has been booked.
• Buyers or third-party movers must present an invoice to the on-site personnel when removing their items.
• Buyers must complete the removal of items within the clearance deadline. Unless otherwise stated, normal removal hours are Monday through Friday, 9 a.m. to 4 p.m. (local time).
• Contact and removal information will be emailed at the time invoices are issued
Sales Contacts
Auction information
Mathew Koster
315 Walt Whitman Road
Huntington Station
NY
11746
United States
 

+1(631) 418-8850