Sale of paperboard manufacturing equipment

COLLECTIVE LOT: ESCHER WYSS Board Making Line, Complete corrugating medium line including lot 1A-1L. Photos are placeholders.

Manufacturer : ESCHER WYSS - Year of manufacture : 1986 - Type : complete corrugating medium/board paper production line - General configuration : installation on 2 levels - Line length : approximately 110 m - Line width : 8 m - Production : corrugating medium paper, basis weight 80 to 175 g/m² - Production capacity : 23 tons per hour on average at 110 g/m² basis weight - Headbox : VOITH dilution headbox - Forming : 1 forming table - Press section : 1 section made of 3 press nips - Additional press : 1 shoe press - Dryer section : 1 pre-coater dryer section made of 36 dryer cylinders - Sizing : 1 size press for starch addition - After-dryer : 1 after-dryer section - Reeling : 1 reel, 4 m trim width - Control : 1 control station with operating desk - Associated equipment : full set of electrical cabinets, cabling and motors for the complete line - Weight approx : 400000 kg - Origin : Switzerland ESCHER WYSS - Location : Wizernes

VOITH dilution headbox

Forming table

Press section comprising 3 press nips

Shoe sub-press

Pre-coater drying section comprising 36 drying rolls

Press film for starch addition

Post-drying section

Winder, 4 m web width

Control station with control panel

COLLECTIVE LOT: Paper Manufacturing Equipment including Lots 2A–2Y

Tooling and spare parts lot — Warehouse / Aisle Q

Reference : Aisle Q orange/yellow racking identified by bay letters A to N and shelf numbers 1, 3, 12, 14, 16, 18, 20, 22, 24 - Storage type : spare parts and consumables warehouse, metal shelving with labeled bins and compartments - Identification system : each reference is manually labeled with its designation and an internal stock number prefix "SW" followed by 4-5 digits; some references also carry a periodic inspection tag e.g. "MAG BS 0006" plate, inspection dates 2004-2013, technician sign-off - IMPORTANT NOTE : given the very large number of references stored in this single aisle several hundred bins and the limited legibility of some labels in the photos, this lot is described synthetically by category rather than reference by reference. A fully exhaustive inventory would require an on-site physical survey. - Electrical protection : industrial low-voltage fuses gG/gL/aM types, ratings 1 A to 800 A, 400 to 690 V, brands Ferraz, Socomec, Merlin Gerin, ASEA Skandia, Diazed, fuse holders and fused disconnect switches, Diazed and square 8x32/22x58 fuses - Protistors semiconductor protection fuses : "Protistor COUT" T2/T3, "Protistor Gl", "Protistor Plot", "Protistor Silized" and "Protistor HLS" ranges, ratings 25 A to 1,250 A, 500 to 4,000 V - Sealing : O-rings, V-ring seals, lip seals, natural gaskets, door seals, sealing rings of various sizes and materials Viton, EPDM - Fittings and nozzles : nipples, quick-connect and blanking fittings, spray nozzles Lechler, Gatewood, blanking couplings, rubber/PVC hoses and sleeves - Mechanical components : bearings, bushings, belts, pulleys, shafts, rings, sleeves, springs, spacers - Electromechanical components : small electric motors, gearmotors, submersible motors, sensors electrical gauges, position indicators, level detectors - Paper-process-specific parts : spare parts for de-staplers Jylhavaara, Lohse, gland packing, Cellier oil pumps, Danfoss valves and valve bodies, John Crane mechanical seals, Nipco/Ripco parts - Consumables and miscellaneous : foams, tapes, adhesives, sealing strips, tubing, fasteners socket-head screws, nuts, washers, pins - Weight : 3000 kg - Origin : France - Allemagne - Location : Wizernes

Tooling and spare parts lot — Warehouse / Aisle P

Reference : Aisle P red stenciled "P" marking, old wall plate "GRINNELL — Control Station" — yellow racking identified by bay letters A to N and shelf numbers 1 to 30 odd numbers on the left side, even numbers on the right side - Storage type : spare parts and consumables warehouse, metal shelving with labeled bins and compartments; some bins have been recently relabeled "Ondulexpress" - Identification system : manual labeling with designation and internal stock number prefix "SW" followed by 4-5 digits; several compartments are partially empty or being reorganized - IMPORTANT NOTE : as with Aisle Q, the very large number of references several hundred bins in this aisle and the limited legibility of some labels in the photos do not allow for a fully exhaustive reference-by-reference survey. This lot is therefore described by broad category. A detailed inventory would require an on-site physical survey. - Cylinders and pneumatics : pneumatic and hydraulic cylinders from multiple brands Bosch, Festo, Matral, Knorr, Jo, Martonair, misc., spare rods and cylinder bodies, protective bellows, air tubing and hoses, quick-connect fittings - Vehicle braking and transmission : brake linings KP3, CT7, CT8 types..., winder knives and counter-knives Jagenberg, Beloit, drive chains, belts, pulleys, tires and inner tubes / air suspension bellows, ball-joint yokes - Winders : dedicated spare parts Jagenberg 43/15 Winder, Beloit Winder No.2, Winder No.3, bearings, bushings, clutches, seal discs, shafts, intermediate plates, associated motors and gearboxes - Gas/combustion control : burner regulators and accessories Schlumberger, Siemens Sipart, min/max gas pressure switches, safety boxes, pressure regulators, temperature sensors - Process instrumentation : flow meters and empty housings, pressure sensors, converters, transducers, position indicators, pressure switches, relays, coax cables dedicated to flow meters, spare parts for basis-weight grammage valves and Neles valves - Cylinder/valve sealing : seals and seal kits from multiple brands Stafsjo, Wabco, Festo, Forkard, Hunger, CPOAC, Martonair, O-rings, cylinder repair kits - Miscellaneous electrical equipment : housings, positioners, diaphragms Camflex, level sensors, frequency converters, Emerson/Rosemount equipment, Masoneilan, Chesterton - Weight : 3000 kg - Origin : France - Location : Wizernes

Tooling and spare parts lot — Warehouse / Aisle N

Reference : Aisle N "N" marking visible on the racking structure — orange racking identified by bay letters A to K and shelf numbers 1 to 23 - Storage type : warehouse for electrical, electronic and automation spare parts, metal shelving with labeled bins and compartments - Identification system : manual labeling with designation and internal stock number prefix "SW" followed by 4-5 digits, colored dots notably yellow affixed to some bins - IMPORTANT NOTE : as with aisles P and Q, the very large number of references several hundred bins and the limited legibility of some labels in the photos do not allow for a fully exhaustive reference-by-reference survey. This lot is therefore described by broad category. A detailed inventory would require an on-site physical survey. If the aisle reference is not "N", please confirm so it can be corrected. - Siemens automation : S7 CPU cards 410-2F, communication cards CP441, CGK7443 Ethernet, memory cartridges MMC, Profibus connectors, PLC backup batteries, Scalance modules industrial network switches and access points, Ethernet couplers - Telemecanique/Schneider automation TSX range : processor cards TSXP47, I/O cards TSX DET, TSX DST, TSX AEM, TSX AST200F, communication cards TSX SCM, TSX SCA, TSX SCY21601 PCMCIA, RAM memory cartridges, TSX BLK terminal blocks, TSX LES extension racks, TSX SUP power supplies - Encoders and couplings : encoders Hübner, TK560F, absolute and incremental encoders, Gerwah bellows couplings DKN 20/38, pulse generators, encoder connectors - Electronic components : potentiometers, thyristors SKKT types, semiconductor diodes, capacitors, rectifier bridges, motor rectifier blocks, regulated power supplies SITOP, galvanometers - Pneumatics : multi-brand distributors and solenoid valves Festo, Bosch, Joucomatic, Wabco, Herion, CPOAC, Norgren/Martonair, distributor bases and coils, filter-regulators, pneumatic silencers - Hydraulics : hydraulic distributors AWE brand, hydraulic pumps gear and piston type, proportional valves, hydraulic cartridges, pressure switches, hydraulic limit switches - Yokogawa instrumentation : process transmitters and modules AAV/AAB/ADV references, dedicated cables KS3, I/O interfaces, interface terminal blocks - Dorries winder system-specific parts : turbo excitation regulation cards, DRA200 control modules, power supply units, web tension/speed control system "systeme de branlement", parts for Allen-Bradley MicroLogix controller - Weight : 3000 kg - Origin : Siemens/Allemagne, Schneider/France, Yokogawa/Japon, etc. - Location : Wizernes

Tooling and spare parts lot — Warehouse / Aisle M

Reference : Aisle M confirmed — yellow/orange racking, bays identified by rack numbers 4, 10, 12, 14, 16, 18, 20, 26, 30 and shelf letters A to N depending on rack - Storage type : warehouse for electrical, electromechanical and automation spare parts, metal shelving with labeled bins and compartments - Identification system : manual labeling with designation and internal stock number prefix "SW" followed by 4-5 digits - IMPORTANT NOTE : as with aisles N, P and Q, the very large number of references several hundred bins spread across 9 numbered racks and the limited legibility of some labels in the photos do not allow for a fully exhaustive reference-by-reference survey. This lot is therefore described by broad category. A detailed inventory would require an on-site physical survey. - Electrical protection racks 18 and 20 : moulded-case and motor circuit breakers Merlin Gerin/Schneider C60N, C120H, C125H, C150; GV2P/GV2ME, associated auxiliary contact blocks and trip units, terminal covers, fuse blocks, fuse-protection devices, SOCOMEC disconnector handles - Contactors and thermal relays racks 4, 8, 9 : Telemecanique/Schneider TeSys contactors LC1D, LC2D, Siemens 3TB, 3RT, ABB AF, A, Klockner Moeller DIL; replacement coils LXD range, various voltages and coil adapters; thermal overload relays LRD/LR9F TeSys Protect range and accessories bases, adapters - Safety relays and interfaces racks 10, 12 : Guardmaster safety relays, Preventa relays XPSAK, XPSUAF, Weidmuller safety relays, Vergator universal relays, timer relays RHN, RHC, RHT ranges, miniature auxiliary relays RXM, RXN, assorted Siemens/Schrack/Finder/Omron/Phoenix relays, associated contact blocks and terminal bases - Detection and limit switches racks 14, 16 : Telemecanique limit switches and detection heads XCK, ZCK, ZC2JE, XCS series, roller/rod levers, position switches BNS, pedal switches, float-type level regulators, magnetic contacts - Operator controls rack 14 : pushbuttons and pilot lights ZB4/ZB5 series, selector switches C26, XB2, emergency-stop units, contact blocks ZEN-L, ZCE - MACS / winder system components racks 2-3, unnumbered in photo : LVDT sensors, resolvers, clutch solenoid valves, basis-weight grammage cylinders, water-level measurement sensors H2O high/low, brightness sensors, encoder belts, regulated power supplies 5 V, 12 V, 300 VDC, MAC5/MAC6 GPU cards, Fincor drive, T1/T2 actuators, MACS motors and gear motors, thermal resistors - Automation and electronic cards racks 26, 30 : ABB S800 I/O cards analog and logic I/O AI830, AO830, DI830, DO820, ABB CI854, CI810, PM861 cards and associated terminal bases TU830, TU831, Yokogawa cards AAM, ADV, AAI, AAB ranges, ABB Process Panel 220 operator interface, power supply and communication cards PW402, PW702, ACM12, AIP521, electronic regulation cards labeled "FB" winder tension/speed control system - Consumables and miscellaneous : terminal blocks, connectors, small fasteners and assorted wiring - Weight : 3000 kg - Origin : France - Location : Wizernes

Tooling and spare parts lot — Warehouse / Aisle L

Reference : Aisle L — orange metal racking distinct from the yellow racking used in other aisles, bays identified by rack numbers 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 27, 28 and shelf letters - Storage type : warehouse for electrical, optoelectronic, mechanical and hydraulic/pneumatic spare parts, metal shelving with labeled bins and compartments - Identification system : manual labeling with designation and internal stock number prefix "SW" followed by 4-5 digits - IMPORTANT NOTE : as with aisles M, N, P and Q, the very large number of references several hundred bins spread across at least 13 numbered racks and the limited legibility of some labels in the photos do not allow for a fully exhaustive reference-by-reference survey. This lot is therefore described by broad category. A detailed inventory would require an on-site physical survey. - Optical detection and sensors racks 14, 16, 18, 20 : SICK photoelectric cells WL, WT series, Omron cells, Datalogic photocells, Baumer and Pepperl+Fuchs ultrasonic sensors, Telemecanique inductive and magnetic detectors XS series, IFM sensors, reflectors, dedicated cables and connectors, laser emitters/receivers, accessories for SICK S3000 laser scanner and radar - Machine safety rack 14 : Siguard safety relays, SICK safety interfaces - Lighting and lamps racks 4, 6, 12 : iodine/halogen lamps, discharge and fluorescent lamps, starters, ballasts, Osram/Philips floodlights, radiant heaters, lamp holders and accessories - Transformers and power supplies racks 26, 28, unnumbered in some photos : single-phase and three-phase transformers of various voltages and ratings, regulated power supplies, rectifiers - Automation and electronic cards racks 26, 28 : PILZ cards input, output, memory, base, Siemens Simatic S5 cards, Measurex modules repeaters, converters, hub, Weidmuller interfaces, assorted connectors and communication modules - Mechanical, hydraulic and pneumatic parts rack 27 : O-rings and flat gaskets Viton and others, toothed belts and belt pulleys, pneumatic cylinders various strokes, fixed/variable-flow piston pumps, brake discs, electromagnetic clutches, gear-pump couplings, pneumatic valves and converters, oil and air filters, rotary unions - Motor carbon brushes and cooling rack 24 : carbon brushes Morgan Cupex, Schunk and other brands for various motors, cooling fans/blowers, ABB technical binders AA paper-machine documentation - Electrical connection hardware racks 8, 10 : PG cable glands and nuts various sizes, brass fittings and plugs, Atlas hose clamps, cable-gland reducers and amplifiers, earth terminals, Hirschmann connectors, Legrand junction blocks, Sertilec cable lugs, Trisol cable ties, wire-end ferrules, brass lock nuts - Weight : 3000 kg - Origin : Multiple : Germany - Location : Wizernes

Tooling and spare parts lot — Warehouse / Aisle K

Reference : Aisle K — yellow metal racking plus one bay at the end of the corridor dedicated to cabling, bays identified by rack numbers 13, 15, 17, 19, 21, 23, 25 and shelf letters - Storage type : warehouse for overhead crane spare parts, radio remote controls, ventilation/motors and electrical cabling, metal shelving with labeled bins and compartments - Identification system : manual labeling with designation and internal stock number prefix "SW" followed by 4-5 digits - IMPORTANT NOTE : as with aisles L, M, N, P and Q, the very large number of references several hundred bins spread across at least 7 numbered racks plus one cabling bay and the limited legibility of some labels in the photos do not allow for a fully exhaustive reference-by-reference survey. This lot is therefore described by broad category. A detailed inventory would require an on-site physical survey. - Radio remote controls rack 13 : HBC-type/similar radio remote control units, dedicated batteries and chargers UTZE, UCCU, UDB2, RC10 remote control accumulators, remote control push-buttons, electronic boards and EEPROMs, transmitter carrying straps - Overhead crane accessories and conductor rail supply racks 15, 17 : new covers and splice plates for conductor rails M5 cranes, Kartling/Wertling plug bases and covers, Legrand connectors male/female bases, type K DSTL current sensors, DKK4 collectors, cable trolleys and drive trolleys, anti-derailment devices, rollers and DH limit switches, SGDH and FAW Dematik relays, three-pole fuse holders, microswitch levers, magnetic switches and magnets - Audible signaling and telephony rack 19 : electromagnetic horns, klaxons, bracket-mounted sirens, radio transmitter/receiver modules FAD, spiral and plug-in telephone cords, telephone boxes and sockets, telephone bells Yotel, power and handset cords Alcatel, Matracom - Ventilation and motors rack 21 : cooling fans and blowers EBM and other brands, DC motors Baumuller, replacement motors Beloit, chuck saw, single-phase motors Vortice, speed-brake motors, hand wheels, assorted motor accessories - Motor carbon brushes racks 23, 25 : multi-reference motor brushes EG, CG, BNR, etc., brush holders, grinding stones fine/medium/coarse, SNR brush trolleys, Merlin Gerin fuses, Technirel equipment, collector for 165 kW DC motor - LED and fluorescent lighting end-of-corridor rack : LED strips and tubes Philips, Osram, Sanelec of various lengths 60, 120, 150 cm, fluorescent tubes, lamp holders and accessories - Cabling and electrical wire end-of-corridor rack : H07V-K wire of various cross-sections and colors 1.5 to 10 mm2; blue, black, red, white, green/yellow, high-temperature flexible cables, PTT cables, Fenwick cables, GPN conduit sleeves of various sizes, spiral cords and assorted cable reels - Process parts and valves adjacent rack : valves and cocks Sulzer, Elsa, flanges, fittings, hoses, repair kits, assorted piping hardware - Weight : 3000 kg - Origin : France - Location : Wizernes

Tooling, welding equipment and spare parts lot

Reference : Lot S22 handwritten tag — welding/fabrication workshop area, at the back of a room adjoining the spare-parts store aisles K/L/M/N/P/Q already described - Zone type : equipped welding/brazing station, auxiliary forge anvil, and two metal storage cabinets for hydraulic/pneumatic spare parts - IMPORTANT NOTE : heterogeneous lot combining several pieces of equipment and a large number of small parts in bins; description is synthetic by category — a fully exhaustive inventory would require an on-site physical survey - Cast/steel anvil on a wooden stand, with welded stainless-steel tube offcuts resting on it - Wall-mounted retractable TRICOFLEX hose reel gas hose with integrated pressure gauge - Argon gas cylinder marked UN1006 ARGON, secured to the wall with a strap, red/white warning tape - Red wire-mesh bin containing metal offcuts, angle iron, assorted tubing - Hydraulic and pneumatic hoses of various diameters, coiled on shelves - Pressure gauges and regulators including a twin-gauge block with a red valve - SKF 22311 EK bearing — referenced on a box labeled "SW : 27266" - "Roller Sheet Guide" box, ref. Z80374-1 SW : 13627 — sheet/roller guide part - "Étrangleur VRD 2Z07 F1" box, ref. 22145 — throttle/regulating valve - Numerous hydraulic fittings and connectors quick couplers, elbows, threaded nipples stored in blue bins - Plastic bottle labeled "Acid for G..." pickling/cleaning product, handle with care - Assorted consumables : magnetic mounting paste, marking powder, penetrating oil, fastener boxes - Elongated rectangular perforated sheet-metal part painted blue, resting on trestles — fabricated or under-repair part function not identifiable with certainty, possibly a perforated guard or chute - Green metal drawer containing workshop consumables : Total grease, penetrating oil, U-bolts, a large number of worm-drive hose clamps, assorted fasteners - Red spherical/cylindrical metal tank with flange, clad in a protective sheet-metal cover — likely a hydraulic or pneumatic accumulator - Weight : 800 kg - Origin : France - Location : Wizernes

Instrumentation/Control workshop — spare parts and calibration equipment

Reference : Lot S23 — "Instrumentation Lab" room, workshop lot tag "026" affixed to the shelving - Zone type : repair and calibration workshop for process instrumentation sensors, positioners, flowmeters, control valves, with dedicated pneumatic test benches - Organization : metal shelving labeled by category blue banners, drawer bins for small parts, wooden wall panels fitted with fittings/gauges for test benches - IMPORTANT NOTE : heterogeneous lot combining instrumentation equipment awaiting repair, calibration gear, and numerous spare parts; description is synthetic by category — a fully exhaustive inventory would require an on-site physical survey - "Fittings for sensor testing" — fittings, MA4803 variable transformer, assorted test accessories - "Calibration and configuration equipment" — Valmet boxes Valmet Forward / Valmet Link, dedicated programming equipment - "Electrical equipment awaiting repair" — various electrical enclosures, junction boxes - "Positioners awaiting repair" — numerous decommissioned Neles-Jamesbury electro-pneumatic positioners, black and grey housings - "Pressure sensors awaiting repair" and "Various sensors awaiting repair" — pressure transmitters, flowmeters, assorted controllers Siemens, ABB - "Control valves awaiting repair" — assorted valve bodies and pneumatic actuators blue, red, white housings, solenoid valves - "Flowmeters awaiting repair" — electromagnetic and ultrasonic flowmeter bodies, measurement electronic boards - "Assorted electrical cables" and "Pneumatic hoses" — cable reels, Trelleborg pneumatic tubing, yellow cable glands - "Assorted consumables" — small parts sorted in metal drawers seals, fasteners, gauges - Neles-Jamesbury electro-pneumatic positioners - Valmet / Valmet Forward paper-mill calibration and configuration equipment - Yokogawa positioners, sensors - Siemens Sipart controllers, indicators - ABB electronic boards, controllers - Kadant M-Clean cleaning-system spare parts - Panametrics portable ultrasonic flowmeter - Baker Hughes / GE original-parts documentation - Weight : 600 kg - Origin : Multiple — Neles-Jamesbury/Finlande, Valmet/Finlande, Yokogawa/Japon, Siemens/Allemagne, ABB, Kadant/France, Panametrics/USA, Baker Hughes-GE/USA - Location : Wizernes

Electronics/Electrical workshop — spare parts, drives and test equipment

Reference : Lot S24 — electronic/electrical repair workshop, workshop lot tag "028" affixed to the shelving - Zone type : repair workshop for electronic boards, variable speed drives, soft starters and discrete components, with test benches - Organization : metal shelving with drawers sorted by component reference, clear plastic drawer storage units for discrete components RAACO Professional brand - IMPORTANT NOTE : heterogeneous lot combining decommissioned or unsorted electronic/electrical equipment, test gear, and a very large quantity of sorted discrete components; description is synthetic by category — a fully exhaustive inventory would require an on-site physical survey - Tektronix TDS 2002 oscilloscope digital, 2-channel - Neoware thin-client terminal "AANBOOM" - Weller VP 801 EC soldering station - Older lab multimeters/controllers grey dial housings, Williamson brand - BBC/Europont X2100 paper-strip chart recorders, "Recorder accessories" box - Farnell lab power supply - Measurement assembly on a mobile stand probe/sensor mounted on a rolling metal tripod, coiled cabling, control box — mobile test/calibration equipment, exact function not determined with certainty - Assorted transistors : BC546, 2N series 2N2102, 2N4426, 2N4222, 2N3055, 2N4233, 2N7777, 2N2270, 2N3304 etc., BT737F, TIP747, TIP37C, MJ2907, CXU444 - Power resistors, hybrid resistors, thermistors, adjustable resistors - Voltage regulators 78xx/79xx series - 1N4002/1N4007 diodes, anti-interference chokes, assorted capacitors, female connectors - Logic ICs 74xx, 74LSxx series and assorted analog ICs LM, SN, GFB - Carbon resistors sorted by value 33 Ω to several hundred kΩ and tolerance color bands - Potentiometers, capacitors sorted by capacitance/voltage - Thyristors dedicated labeled drawer - ABB SMC-3 soft starters - Allen-Bradley PowerFlex variable frequency drive grey housing - Allen-Bradley 1305-series drive - Assorted power boards/modules with heatsinks and high-power connectors - Semikron technical documentation power modules and assorted bound manuals - Multi-pole power contactors Telemecanique/Schneider type - Iwaki Metering Pump box dosing pump, new or awaiting installation - Baxter/Parker unit drive or controller, 650 series - Reels of assorted electrical cable low-voltage and signal, corrugated conduit - Small connection hardware wire grips, black/red test leads, cable-lug ferrules - Dismantled wall sockets and junction blocks, salvaged hardware - Weight : 500 kg - Origin : Multiple — Tektronix/USA, Weller/Allemagne, Allen-Bradley/USA, Semikron/Allemagne, Telemecanique-Schneider/France - Location : Wizernes

Lot of tools and spare parts

Tag : orange-painted metal cabinet with 4 hinged doors, green/turquoise stencilled marking "S1" on the left-hand door - Storage type : cabinet for mechanical and hydraulic spare parts, wooden compartments fitted inside 2 columns x 4 levels per module - A layout plan/diagram local reference is affixed to the right-hand door of the cabinet - IMPORTANT NOTE : given the large number of heterogeneous parts stored in this cabinet and the limited legibility of some handwritten labels in the photographs, this lot is described synthetically by category rather than item by item. A full detailed inventory would require an on-site physical survey. - Hydraulics : ENERPAC hoses and fittings, ball valve, calibration pressure gauges, pressure reducer, equipment hand-labeled "Flow meter + pressure-reducing gauge, tested", "Suction strainers" - Transmission : large-diameter V-belt/flat-belt loops, one hollow-shaft gear motor aluminum housing, industrial type, pulleys and hubs - Bearings & sealing : several roller bearings/sleeve rings including a large-diameter threaded ring, likely an adjustment nut/bearing collar, box of "needle bearings", seals - Parts tagged for a strand-cutter/sorter type machine KADANT, cf. the already-catalogued Coupe-toron 100CT500 : box labeled "STRAND CUTTER — TENSION LEVER PIV AL3" tension lever, reference K1403, carton labeled "Extraction screw — Bearing — Head roller" - Parts tagged for the HAP5 press : black container labeled "HAP.5 — YELLOW" - Lifting accessories : red and blue lifting shackles/rings load-rated, wire slings with thimbles, threaded lifting eyes - Riveted sheet-aluminum motor housings/covers likely electric motor ventilation covers, oval shape with double louvers, several units - Fasteners and threaded rods : numerous large-diameter bolts/threaded rods some painted red, indicating specific use — flanges or press, washers, nuts - Brakes/clutches : black brake linings/discs with a red band, several diameters, stackable - Large-diameter black flanges and plates, with mounting holes marked in red assembly reference marks - Adjustment blocks/shims in painted steel blue, black, blue vise block on slide tensioning/adjustment device - Miscellaneous : black rubber/composite parts curved segments, pads, sharpening stone bar/blade, black pipes/sleeves, plugs - Weight : 400 kg - Origin : France - Location : Wizernes

Lot of tools and spare parts

Tag : "MAGASIN HB" stencilled inscription on aisle upright, access door tagged "H9" - Storage type : large spare-parts storeroom across several rows of wooden bin racking, organized into lettered aisles A to E and numbered bins even numbers recorded from 3 to 24 depending on the rows photographed - Safety signage : water-spray-with-additive fire extinguishers classes AB, wood-cardboard-paper-rubber-textile-PVC-polystyrene-petrol-fuel-gas distributed along the aisles, "Emergency exit" signs - Associated documentation : notice "Localisation des rechanges vannes de regulation — Plan des casiers" control-valve spare parts location plan listing valve/actuator references by bin column and row e.g. BC12/25, PM50AT 3-body, R1LA50AJJK, Servo 36DPV513A, Varipack, Maxflo, Somas - IMPORTANT NOTE : given the very large number of references stored several thousand items across the whole storeroom and the limited legibility of some labels in the photographs, this lot is described synthetically by category rather than item by item. A full detailed inventory would require an on-site physical survey. - Chain transmission : roller chains of various pitches, stored coiled on several shelf levels - Overhead crane braking : complete brake linings for "PONT A.D.C" tags No. 0300 CH, 0300 CB, 0300 CS, brake discs and shoes, blue clamping jaws - Hoist cables and accessories Verlinde, Demag : galvanized steel cables of various diameters and lengths coiled, pulleys, blocks, hooks, brake linings for hoists KB80/KB100 types, Ø250 brake discs, reel springs, rollers, cable guides, swaged shackles left/right, bearings - Electronics/electrical engineering and variable-speed drives : ABB AC Drive units several power ratings, 6-30 kW, Baumuller BUM 60-12/24 drive, Siemens drive cards 6QN..., 6QA..., thyristors, power capacitors, power supplies, various electronic boards, Siemens screen operator panel, cooling fans for drives, power cables - Process valves and fittings : handwheel valves various diameters, butterfly valves, plug valves, electric and pneumatic valve actuators blue types, tags recorded R1LA, BC, VARIPACK, steel flanges and plates of multiple diameters - DILATOFLEX expansion joints rubber flanged anti-vibration couplings, several nominal diameters DN100 to DN300 - MARTONAIR pneumatic cylinders - Various mechanical parts not precisely identified bearings, spacers, seals, Camflex-type valve diaphragms, belts, shims - Weight : 5000 kg - Origin : Multiple — pieces multi-marques et multi-origines ABB/Suisse-Suede, Siemens/Allemagne, Baumuller/Allemagne, Verlinde/France, Demag/Allemagne, Martonair/Royaume-Uni, Dilatoflex, Somas - Location : Wizernes

Lot of mechanical spare parts and maintenance materials

Tag : separate warehouse, structured on pallet-racking orange Feralco and blue uprights, organized into lettered/numbered aisles G3 to G12, M2 to M16 recorded with levels A to D - Zone tagged "H M" blue-painted marking on upright, with a hanging brush/dustpan - IMPORTANT NOTE : given the very large number of pallets stored and the limited legibility of some labels in the photographs, this lot is described synthetically by category rather than item by item. A full detailed inventory would require an on-site physical survey. - Gear motors and electric motors : numerous units of various power ratings 0.37 kW to 37 kW recorded on labels, brake motors, hollow-shaft gear motors, stored on individual pallets - Hydraulic and pneumatic cylinders : cylinders of various sizes including "Verin guideur de toile SW27832" [fabric guide cylinder], "hydraulic cylinder", "shovel valve cylinder", "MPCO lift cylinder", large-diameter cylinder bodies and rods - Electrical/automation cabinets and equipment : Siemens SIMATIC cabinets, ABB equipment "AC Drive" cartons, Rockwell Automation equipment, various electrical enclosures, VNET network cables, Yokogawa equipment FCS transmitters, power supplies, "Fans" cartons - OLAER hydraulic accumulators - AMMERAAL BELTECH conveyor belts and bands - Doctor blades and papermaking machine accessories : "K DANT" Kadant boxes containing doctor blades, VOITH boxes SkyLine, SkyService, SkyTerra, SkyTop, SkyTop Plus ranges — "Perfect choice for covers", BONETTI boxes doctor blades, "Lames de racle Voith" labels - Complete mechanical assembly : wooden crate labeled "Complete bearing for P100 pulper + propeller and lubrication unit" SW39164 — spare part for a P100 pulper - Reinforced ZARGES Eurobox transport/storage cases aluminum, lever-latch closures hand-labeled "Tools/spares", "Head box", "Diffusers" - Lifting accessories : flat textile slings orange and blue, with WLL load rating marked, shackles - HALECO calcined diatomaceous earth bag absorbent powder, filtration/cleaning product - Obsolete/decommissioned electronic and IT equipment : old control cabinets, electronic boards, an old computer terminal/screen industrial console type, stored loose on pallets destined for scrapping - Stainless steel fittings and blue handwheel valves, in a wire-mesh pallet crate tagged "Order 92344..." - Rolls of stretch-wrap packaging film - Weight : 8000 kg - Origin : Multiple — pieces multi-marques et multi-origines Siemens/Allemagne, ABB/Suisse-Suede, Rockwell Automation/USA, Yokogawa/Japon, Olaer/France, Ammeraal Beltech/Pays-Bas, Kadant/France, Voith/Allemagne, Bonetti, Zarges/Allemagne - Location : Wizernes

Lot of industrial flexible hoses technical flexible piping

Reference : "Local Courroies" shown on the evacuation plan posted on the entrance pillar, with a "YOU ARE HERE" marker — access pillar marked with vertical row lettering A to E and odd/even bay numbers 1, 3, 5, 7, 15, 19, 21, 23, 25, 27 noted on the crossbars - Storage type : wood/metal shelving with dedicated bins for storing flexible hoses and soft piping, arranged in two parallel facing shelving blocks, plus a set of metal shelving with vertical cubbyholes cardboard bins on pallets for large-diameter hoses - Safety signage : SICLI water-additive extinguisher AB classes fixed to the entrance pillar, "EMERGENCY EXIT" sign, posted evacuation plan "LOCAL COURROIES" zone, legend "tall stepladder / waiting area", "cleaning kit", "pellet bin" - Identification system : each bin/hose is manually labeled with its designation and an internal stock number prefix "SW" followed by 4-5 digits; small beige/orange cardboard boxes for short hoses, tags hung directly on the longer hoses - IMPORTANT NOTE : given the very large number of references stored several hundred hoses across the shelving and the limited legibility of some labels in the photos, this lot is described synthetically by category rather than reference by reference. A fully exhaustive inventory would require an on-site physical survey. - Stainless steel braided metal hoses process connections : numerous "FLEXIBLE INOX" references of various diameters and lengths e.g. DN20 to DN40, lengths 0.5 to 3 m, some with threaded fittings or plain ends, others pre-assembled with rotating flanges - Smooth PTFE hoses : "FLEXIBLE PTFE LISSE" references e.g. L550 DN1/2, used for chemical/process fluids - Assorted rubber/braided hoses : "FLEXIBLE TRESSE", "FLEXIBLE ACIER RESSORT", "FLEXIBLE UNM01", flexible black hoses for air/water/hydraulics of various diameters, some with quick couplings or yellow/brass threaded ends - Large-diameter suction hoses/ducts : transparent PVC spiral hoses clear and translucent gold/yellow, blue and light grey spiral hoses suction ducting, corrugated black rubber hoses e.g. "TUYAU CAOUTCHOUC OSLO S 80" SW10683, used for dust/chip extraction or bulk material transfer - Green and grey corrugated process hoses — exact use not determined with certainty likely chemical piping or compressed air - New stainless steel braided hose assemblies with rotating flanges — lot of approximately 16 identical units laid on the floor, stainless braided sleeve, steel rotating flanges on both ends, yellow injection-molded protective end caps still in place new, unmounted products — diameters and lengths vary by unit, likely intended for connecting pumps or heat exchangers in the paper-making process - Hose reels and coiled tubing "TUYAU ENROULEUR" - Weight : 1500 kg - Origin : France - Location : Wizernes