Lot 2R:Tooling and spare parts lot

Reference : Aisle A — confirmed by an "A" column tag fixed to a racking upright level/bay letters A to P visible on neighboring uprights: M, N - Storage type : mixed spare-parts store combining 1 open metal shelving with labeled bins and compartments bays identified by odd numbers 1, 3, 5, 7, 9, 11 and 2 orange metal cabinets with sliding/hinged doors identified by even numbers 2, 4, 6, 8, 12 - Identification system : manual labeling with designation and internal stock number prefix "SW" followed by 4-5 digits, on orange cardboard tags placed at the edge of each bin or compartment - IMPORTANT NOTE : as with aisles K, L, M, N, P and Q already described in this document, the very large number of references several hundred bins and compartments spread across at least 9 racks and 5 cabinets and the limited legibility of some labels in the photos do not allow for a fully exhaustive reference-by-reference survey. This lot is therefore described by broad category. A detailed inventory would require an on-site physical survey. - Dynamic seals dominant category in this aisle : SIMRIT/JE SIMRIT type BA lip seals many dimensions, e.g. 45x60x8, 50x65x10, 55x72x8..., Viton seals, Viton type-BA rings, BS sealing rings, V-ring seals V50, V60A, V95A, V110A, V325..., double-lip spy/spi seals for pumps - O-rings and flat gaskets : multi-dimension, multi-material "OR"/"torique" O-rings NBR, EPDM, PTFE, Viton, cupro-nickel gaskets Ø6 to Ø40 range, labeled "JOITS CUPRO NICKEL", "PC 851" seals and associated R-rings R-ring No.25 to No.77 in PC851, nitrile cord of various diameters Ø2 to Ø10 - Parts for floaters/de-icers and pumps : floater packing top-up stock, 2-lip seal pouch, nozzles GTW, various references, gas valve for forklift truck - Handling and safety accessories : red chains/slings with safety-latch hooks, safety sensors, feeler/de-stacker rollers, aluminum de-stacker pulleys, blue straps, gas sensors - Maintenance consumables : T-REX aerosol spray repair/sealing, service-belt repair kit, blue adhesive tape, flat gasket braid on a roll, filter sleeve Dia. 320, Length 3500 - Miscellaneous at the bottom of the racks : KADANT crates "an accent on innovation", safety equipment ETSV503 vest, ETN Rouen carton, "floater packing top-up" box - Tapping and threading cabinet 2, side A : Whitworth taps 1/4, 1/8, 5/8-11, 9/16-12, 7/8, 11/4-7..., right-hand tap sets 5x80 to 23x250, gas taps, right-hand dies 2x50 to 7.5x100 and 6.5 to 22x250, stored on dedicated wooden racks labeled "TARAUDS PAS DROITE" and "FILIERES PAS DROITE" - Cabinet 4 side A : aerosol/spray products penetrating oil, lubricant, assorted bottles, marking tags/arrows, adhesive tape, grinding wheels/abrasive products - Cabinets 6 and 8 "VIEUX TOURS" [old lathes] tag visible at the top, unrelated to the actual shelf contents : bulk stock of absorbent cotton wool, white rags, fasteners TF 25x16 wood screws, 6x50 to 8x60 steel coach screws, Colson cable ties, electrical connector blocks 2.5 to 25 mm², spray paint cans orange, white, blue, fluorescent, maintenance products ARDROX degreaser/leak detector, flat sealant gaskets - Cabinet 12 : partially empty compartments being reorganized; boxes of resistors, round fork terminals, flush-mounted and sealed IP electrical junction boxes, jointing paste/adhesive, sealing sand box, felt, inventory binder posted on the door - Weight : 3500 kg - Origin : SIMRIT/Allemagne, T-REX, KADANT/France, ARDROX - Location : Wizernes