High Spec CNC Factory Closure – Variety of Haas Lathes and Mills, Turning Centres, EDM & Inspection Equipment

Table Dimension Ø500mm (7 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=762mm, 'Y'=508mm, 'Z'=508mm, 'B'=-35° To +120°, 'C'=360°. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=22.9m/min, 'Y'=22.9m/min, 'Z'=22.9m/min, 'B'=50°/sec, 'C'=50°/sec. Maximum Cutting Feed 16,5m/min. Maximum Spindle Speed 8,100rpm (22.4kW Motor). Spindle Taper BT40. 40 + 1 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 305mm, Maximum Tool Weight 5.4kg. S/No. 1135589 (2017).

Samchully MH-212 Ø315mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8.12 Station Turret. S/No. 3104628 (2016).

Samchully MH-212 Ø315mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8.12 Station Turret. S/No. 31004618 (2016).

Kitagawa B-210 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø76mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø88.9mm. Maximum Spindle Speed 3,400rpm (22.4kW Motor). Spindle Nose A2-6. 12 Station Turret. S/No. 3097882 (2014).

Table Size 914mm x 356mm (3 'T' Slots 16mm Wide x 125mm Pitch). Table Load 680kg. Axis Travel 'X'=762mm, 'Y'=406mm, 'Z'=508mm. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 279mm, Maximum Tool Weight 5.4kg. S/No. 1121547 (2015).

Table Size 1,219mm x 457mm (5 'T' Slots 16mm Wide x 80mm Pitch). Table Load 794kg. Axis Travel 'X'=1,016mm, 'Y'=508mm, 'Z'=635mm. Distance From Spindle Nose To Table 742-107mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 330mm, Maximum Tool Weight 5.4kg. S/No. 1119419 (2014).

Table Size 914mm x 356mm (3 'T' Slots 16mm Wide x 125mm Pitch). Table Load 680kg. Axis Travel 'X'=762mm, 'Y'=406mm, 'Z'=508mm. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 279mm, Maximum Tool Weight 5.4kg. Haas 4/5th Axis Table 'T' Slotted Ø160mm Faceplate, Distance Between Trunnions 470mm, Maximum Tilt Angle -120° /+120°. S/No. 1118479 (2014).

Ø100mm Collet Chuck. Maximum Swing Ø533mm. Maximum Cutting (Varies With Turret) Ø330mm. Maximum Cutting Length (Without Workholding) 572mm. Bar Capacity Ø63.5mm. Axis Traverses 'X'=213mm, 'Z'=572mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø88.9mm. Maximum Spindle Speed 4,000rpm (14.9kW Motor). Spindle Nose A2-6. 12 Station Turret. Note: Screen Needs Attention. S/No. 3097016 (2013).

Table Size 914mm x 356mm (3 'T' Slots 16mm Wide x 125mm Pitch). Table Load 1,361kg. Axis Travel 'X'=762mm, 'Y'=406mm, 'Z'=508mm. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=25.4m/min, 'Y'=25.4m/min, 'Z'=25.4m/min. Maximum Cutting Feed 16.5m/min. Maximum Spindle Speed 8,100rpm (22.4kW Motor). Spindle Taper BT40. 20 Position ATC. Maximum Tool Ø89mmximum Tool Length 279mm, Tool Weight 5.4kg. S/No. 1108180 (2013).

Cutting Range 90° Round Ø260mm, 90° Flat 300 x 260mm, Smallest Ø10mm, Smallest Flat 10 x 8mm. Feeding Length Single Stroke 650mm. Drive Power 2.6kW. Blade Speed 15-110m/min. Saw Blade Dimensions 4,440 x 34 x 1.1mm. Rest Piece Length In Automatic Operation 70mm. Total Power 3.7kW. Saw Feed- Servo-Feed Via Ballscrew, Material Feed- Ballscrew, Material Clamping- Hydraulic, Saw Blade Cleaning- Electrically Driven Chip Brush. S/No. 10013353 (2018).

Cutting Range 90° Round Ø320mm, 90° Flat 350 x 320mm, Smallest Ø10mm, Smallest Flat 10 x 8mm. Feeding Length Single Stroke 650mm. Drive Power 2.6kW. Blade Speed 15-110m/min. Saw Blade Dimensions 4,440 x 34 x 1.1mm. Rest Piece Length In Automatic Operation 70mm. Total Power 3.7kW. Saw Feed- Servo-Feed Via Ballscrew, Material Feed- Ballscrew, Material Clamping- Hydraulic, Saw Blade Cleaning- Electrically Driven Chip Brush. S/No. 10008707 (2015).

Table Dimension 700 x 410mm (3 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=700mm, 'Y'=400mm, 'Z'=330mm. Rapid Traverse 'X,Y,Z'=54m/min. Maximum Spindle Speed 10,000rpm. Spindle Taper ISO 30. 21 Position ATC. Nikken 4th Axis Unit Ø105mm Faceplate, Centre Height 150mm. S/No. P101XH169 (2010).

Table Size 1,372mm x 610mm (13 In 'Y', 6 In 'X' 'T' Slots 16mm x 100mm Pitch). Table Load 1,814kg. Axis Travel 'X'=1,016mm, 'Y'=660mm, 'Z'=635mm. Distance From Spindle Nose To Table 742-107mm. Rapid Traverse 'X'=18m/min, 'Y'=18m/min, 'Z'=18m/min. Maximum Cutting Feed 12.7m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 330mm, Maximum Tool Weight 5.4kg. S/No. 1066796 (2008).

Tonnage 60 Ton. Bending Length 2,500mm. Distance Between Columns 2,050mm. Throat 450mm. Motor 4kW. S/No. 012577 (1992).

Maximum Workpiece Dimension 1,050 x 650 x 250mm High. Maximum Workpiece Weight 400/800kg. Axis Travel 'X'=500mm, 'Y'=350mm, 'Z'=256mm, 'U,V'=±70mm. Maximum Taper Angle +/- 30° @ 100mm High. Wire Dimension Range 0.10-0.33mm. Note: Needs Attention. S/No. 259 (2002).

Collet Chuck. Maximum Swing Ø270mm. Centre Height 125mm. Swing Over Cross Slide Ø115mm. Approx Turning Length 420mm. Distance Between Centres 700mm. Speed Range 0-5,000rpm. Dual QTC. S/No. 340382 (1999).

Bison Ø125mm 3 Jaw Chuck. Maximum Swing Ø270mm. Centre Height 125mm. Swing Over Cross Slide Ø115mm. Approx Turning Length 420mm. Speed Range 0-5,000rpm. Dual QTC. S/No. 338809 (1998).

Capacity 2,500kg. Maximum Lift Height 4,000mm. Centre Of Gravity 500mm. Rubber Tyres. Working Hours 1,041. S/No. B36LE65673

Internal Description 980 x 730 x 600mm. Ø500mm Rotating Table. S/No. 508525 (2015).

Including: (1) Kintek KH1-25C Grip. (3) Assorted Rohm MK3 Revolving Centres.

Including RZ-40X32 Split Type Reduction Sleeves

Dimensions Approx 600mm x 600mm x 840mm. Including Machine Bed Clamping Aids.

Dimension Approx Ø250mm.

300kg Capacity. d=0.1kg. Dimensions of Platform 900mm x 600mm.

Including 1/2" Sq Drive Chrome Vanadium Sockets, Spanners, HSS Reamers, Abrasives, Hexagon Keys, Safety Equipment, Ear Protectors & Files.

Range 0-20mm-1.28mm & 0.011"-0.052".

Comprising: Unused Sine Bar CL-30-003, 15/16" x 5". V Block & TOS Ø100mm 3 Jaw Manual Lathe Chuck.

Including: Hoffmann Steel Rollers. Mitutoyo Holtest .425"-.500" Range Bore Micrometer. Moore & Wright Extension Rods. Assorted Gagemaker Thread Rolls.

Including Single Ended Screwed Plug Gauges.

(1) Gauge .5"-.65" Range & (1) Gauge .65"-.8" Range. Complete with 177-182 Setting Ring .64975".

Comprising: (1) 468-921 Digital Bore Gauge Set with (1) .35"-.425" Range Gauge & (1) .425" -.5" Range Gauge, (1) 177-179 Setting Ring .34990" in Wooden Case. Additionally (1) 368-806 Holtest Bore Gauge 1.2"-1.4" Range.

Comprising: (1) Diatest Imperial Bore Gauge Set. (1) 511 Series Mitutoyo 2"-6" Range Bore Gauge Set. (1) Assorted Extension Rods.

Including: (2) Mitutoyo 0-1" Micrometers. (1) Starrett 210-MA Screw Thread Comparator Micrometer 0-22mm Range. (1) Moore & Wright 966, 1"-2" Micrometer. (1) Moore & Wright 1966B, 2"-3" Micrometer. (1) Mitutoyo 2"-3" Micrometer. (1) Mitutoyo 103-185, 8"-9" Micrometer. (1) Moore & Wright 1966B, 1"-2" Micrometer. (1) Moore & Wright 0-1" Micrometer.

Comprising: (1 of Each) 100mm-125mm, 125mm-150mm, 150mm-175mm, 175mm-200mm, 200mm-225mm, 225mm-250mm, 250mm-275mm, 275mm-300mm.

Complete with MC5 Controller, 240 Volt.

Range of Pin Gauges .062"-.4995". Dimensions of Cabinet 480mm x 300mm x 320mm High.

Including Assorted Grinding Wheels, Flanges, Hubs, Adaptors & Wheel Shafts. Centre Balance, Grinding Attachments.

Including Borazon Mounted Points, CBN Mounted Points, Grinding Wheels, Flanges, Hubs & Adaptors.

Dimensions Approx 910mm x 510mm x 900mm.

Dimensions Approx 1,230mm x 800mm x 900mm.

Including Assorted Collets & Indexable Insert Milling Bodies.

Dimensions Approx 600mm x 600mm x 890mm.

Dimensions Approx 880mm x 460mm x 1,820mm.

Including Assorted Machine Clamping Aids.

Platform Dimensions 400mm x 600mm. Serial Number S-793380.

Power Supply 440 Volt, 3 Phase.

Complete with Assorted Ring Shaped Steel Gauges, Double Ended & Single End Plain Plug Gauges & Screw Ring Gauges.

Including: (1 of each) 5°, 12.5°, 18° & 20° Steel Angle Gauge Blocks in Wooden Box. (4 Sets) Assorted Steel Pin gauges (Pieces missing). Mitutoyo 513-415-10 Dial Test Indicator. Verdict T3 DTI. (2) V Blocks. Assorted Small Hole Gauges. Ceratizit 10005884/S12-3 Unused Spanner Wrench.

125mm Width of Jaw.

Including Silver Steel, Machine Tooling Aids & Ground Flat Stock.

Ø210mm 3 Jaw Chuck. Centre Height 150mm.

Table Dimension Ø500mm (7 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=762mm, 'Y'=508mm, 'Z'=508mm, 'B'=-35° To +120°, 'C'=360°. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=22.9m/min, 'Y'=22.9m/min, 'Z'=22.9m/min, 'B'=50°/sec, 'C'=50°/sec. Maximum Cutting Feed 16,5m/min. Maximum Spindle Speed 8,100rpm (22.4kW Motor). Spindle Taper BT40. 40 + 1 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 305mm, Maximum Tool Weight 5.4kg. S/No. 1172799 (2020).

Samchully MH-212 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8. 12 Station Turret. S/No. 3112177 (2018).

Table Size 914mm x 356mm (3 'T' Slots 16mm Wide x 125mm Pitch). Table Load 680kg. Axis Travel 'X'=762mm, 'Y'=406mm, 'Z'=508mm. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 279mm, Maximum Tool Weight 5.4kg. Haas 4/5th Axis Table 'T' Slotted Ø160mm Faceplate, Distance Between Trunnions 470mm, Maximum Tilt Angle -120° /+120°. S/No. 1134269 (2016).

Ø85mm Collet Chuck. Maximum Swing Ø419mm. Maximum Cutting Length (Varies With Workholding) 406mm. Bar Capacity Ø64mm. Axis Traverses 'X'=200mm, 'Z'=406mm. Rapid Traverses 'X'=30.5m/min, 'Z'=30.5m/min. Spindle Bore Ø88.9mm. Maximum Spindle Speed 4,000rpm (14.9kW Motor). Spindle Nose A2-5. 12 Station Turret. S/No. 3107324 (2017).

Table Size 1,219mm x 457mm (5 'T' Slots 16mm Wide x 80mm Pitch). Table Load 794kg. Axis Travel 'X'=1,016mm, 'Y'=508mm, 'Z'=635mm. Distance From Spindle Nose To Table 742-107mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 330mm, Maximum Tool Weight 5.4kg. S/No. 1119704 (2015).

Table Size 1,219mm x 457mm (5 'T' Slots 16mm Wide x 80mm Pitch). Table Load 794kg. Axis Travel 'X'=1,016mm, 'Y'=508mm, 'Z'=635mm. Distance From Spindle Nose To Table 742-107mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 330mm, Maximum Tool Weight 5.4kg. S/No. 1083417 (2011).

Distance Between Centers 400mm. Centre Height 125mm. Maximum Workpiece Weight Between Centres 30kg. 'X' Axis- Maximum Travel 254mm, Feed 0,001-5,000mm/mìn, Resolution Rotational Measuring System 0,0001mm, Distance Between Guideways 280mm. 'Z' Axis- Maximum Travel 483mm, Feed 0,001-10,000mm/mìn, Resolution Rotational Measuring System 0,0001mm, Distance Between Guideways 200mm. Wheelhead-Swivel Range -15 to +195°, Manual Swivelling Axis 2.5° Hirth, Automatic Swivelling Axis 1° Hirth, Fine Adjustment 0.0001°, Fitting Taper Ø63mm, Drive Power 5.5kW, Grinding Wheel Dimension (Left) Ø400 x 40 x Ø127mm, Grinding Wheel Dimension (Right) Ø400 x 40 x Ø127mm. Circumferential Speed Up To 50m/s, lnternal Grinding Device For High-Frequency Spindles Locating Bore Ø120mm, Speeds 24,000-120,000rpm. Workhead Speed Range 1-1,500rpm. Tailstock MT3, Quill Travel 35mm, Quill Ø50mm. S/No. 039 (2007).

Cutting Area 3,000 x 2,000mm. Linear Straightness Accuracy ± 0.1mm/m. Rapid Traverse Maximum 10m/min. Acceleration 0.05g. Repeatability ± 0.06mm. Ballbar Circularity ± 0.1mm. 'Z'-Axis Travel 178mm. S/No. 1200044 (2020).

Table Dimension 850 x 410mm (3 'T' Slots). Maximum Table Load 250kg. Axis Travel 'X'=700mm, 'Y'=400mm, 'Z'=330mm. Rapid Traverse 'X,Y,Z'=54m/min. Maximum Spindle Speed 24,000rpm. Spindle Taper ISO 30. 21 Position ATC. Nikken 4/5th Axis Unit Ø105mm Faceplate, Centre Height 150mm. S/No. P064VH617 (2006).

Table Size 1,466mm x 267mm (3 'T' Slots 16mm Wide x 101.6mm Pitch). Table Load 454kg. Axis Travel 'X'=1,016mm, 'Y'=406mm, 'Z'=406mm. Distance From Spindle Nose To Table 508-102mm. Rapid Traverse 'X'=10.2m/min, 'Y'=10.2m/min, 'Z'=10.2m/min. Maximum Cutting Feed 10.2m/min. Maximum Spindle Speed 6,000rpm (5.6kW Motor). Spindle Taper BT40. 10 Position ATC. Maximum Tool Ø89mm, Maximum Tool Weight 5.4kg. Note: Needs Attention. S/No. 1087214 (2011).

Measuring Range 'X'=700mm, 'Y'700mm, 'Z'=500mm. With Renishaw PM10MQ Probe Head. 6 Position Probe Rack. Calibration Sphere. Renishaw PHC 10-2 Probe Controller & Renishaw PI-200 Probe Interface. S/No. GLOA000831 (2011).

Maximum Workpiece Dimension 750 x 550 x 250mm High. Maximum Workpiece Weight 200kg. Axis Travel 'X'=350mm, 'Y'=250mm, 'Z'=256mm, 'U,V'=100mm. Maximum Taper Angle +/- 30°. Wire Dimension Range 0.10-0.33mm. S/No. 314 ((2006).

Table Dimension 600 x 450mm. Maximum Table Load 400kg. Axis Travel 'X'=350mm, 'Y'=250mm, 'Z'=350mm. Tank Dimension 860 x 420mm. 30 Position ATC. S/No. 300 (2006).

Ø600mm Screen with 90° Cross Lines. Work Table Dimension 450 x 200mm (2 'T' Slots), 15° Table Rotation For Thread Inspection. Lens Magnification Range x5, x10, x20, x25, x50, x100. S/No. 603815.

Table Size 914mm x 356mm (3 'T' Slots 16mm Wide x 125mm Pitch). Table Load 1,361kg. Axis Travel 'X'=762mm, 'Y'=406mm, 'Z'=508mm. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=25.4m/min, 'Y'=25.4m/min, 'Z'=25.4m/min. Maximum Cutting Feed 16.5m/min. Maximum Spindle Speed 8,100rpm (22.4kW Motor). Spindle Taper BT40. 20 Position ATC. Maximum Tool Ø89mm. Maximum Tool Length 279mm, Tool Weight 5.4kg. Note: Spares Or Repair. S/No. 1111299 (2014).

Including NTK Miniature NBH Type Turning Toolholders.

Including: (1) Cogsdill Universal Bushing Tool UBT-B2N. (1) Omega OM32508 Floating Reamer Holder. Collet Holder & Rotating Centre.

Including Unused Iscar DR-MF-12R-2.250-16A-06 Multi Function Indexable Holders.

Including Boring, Parting & Face Turning Static Holders.

Including Boring & Parting Static Holders.

Comprising: (1) Double Sided Louvre Rack 1,000mm x 1,900mm High with Chuck Soft Jaws & Machine Bed Clamping Aids. (1) Single Sided Mobile Louvre Rack 870mm x 1,800mm High. (1) 2-Door Steel Cabinet 1,000mm x 390mm x 1,500mm. Assorted Plastic Storage Bins.

Range 1mm - 24mm.

Sanding Disc Ø125mm, Belt Size 760mm x 25mm.

Range 0-200mm.

Including (2) Dial Indicator Stands.

(1) Gauge .5"-.65" Range & (1) Gauge .65"-.8" Range. Complete with 177-182 Setting Ring .64975".

Comprising: (2) Mitutoyo 500-196-30 Digital Vernier Calipers 0-150mm Range. (1) Mitutoyo 0-150mm Range Digital Vernier Caliper. (1) Mitutoyo 571-211-30 Digimatic Depth Gauge, 0-150mm Range. (1) 0-300mm Range Digital Machine Linear Scale (As New).

Comprising: (2) 70mm Width of Jaw Vices & (1) 50mm Width of Jaw Vice.

Including Assorted V Blocks. (1) Eclipse E934 Magnetic V Block (Dimensions 70mm x 100mm x 95mm). (1) Eclipse 901 Magnetic Base Only.

Comprising: (1) Laser 60mm Width of Jaw Toolmaker's Vice. (1) Indexa Ø100mm 3 Jaw Manual Lathe Chuck with Key.

Comprising: (1) Micrometer Stand. (1 Set) Pryor Interchangeable Stamps & Holder. (1) Mitutoyo Profile Projector Plain Stage Glass 152mm x 152mm.

Including: (1) Moore & Wright 948, 12"-16" Interchangeable Anvil Micrometer. (1) Mitutoyo 103-132, 1"-2" Micrometer. (1 of Each) Moore & Wright 0-1", 1"-2", 2"-3", 3"-4", 4"-5" & 8"-9" Micrometers.

Comprising: (1 of Each) 4"-5", 5"-6", 6"-7", 7"-8", 9"-10", 10"-11" & 11"-12".

Including: (1) Mitutoyo 543-391B Dial Gauge & (1) Mitutoyo 543-471B Dial Gauge.

Including: Bench Clamp, Spanners, Pliers, James Magnus Etcher & Kyowa 390136 Bench Microscope (For repair).

Including: Benson 500mm/20" Height Gauge with Mercer Dial Gauge. Mitutoyo 0-1" Depth Micrometer. (2) Linear 0-1" Depth Micrometers. SPI 20-940-3 'No Force' Groove Micrometer, 0-25mm Range. Tesa Setting Rings. Mitutoyo 178-394 Deep Groove Detector. Mitutoyo 02AGD130 (LSM503) 1mm-30mm Calibration Gauge Set (As New). YPG Pin Blade Set, Imperial.

Comprising: (1) Mitutoyo 293- 345-30 Digital Micrometer, 1"-2" Range. (1) Moore & Wright 25mm-50mm Range Micrometer. (1) Baty 25mm-50mm Range Micrometer.

Comprising: (1) Mitutoyo 293- 341-30 Digital Micrometer, 1"-2" Range. (1) 0-25mm Range Micrometer. (1) Mitutoyo 293-766-30, 0-1" Range Micrometer.

Range of Pin Gauges .062"-.4995". Dimensions of Cabinet 480mm x 300mm x 320mm High.

Including HSS Drill Blanks. Sunnen Honing Mandrels, Stone Retainers, Adaptors & Wedges. Single End YPG Plain Plug Gauges.

Including Mercer Dial Gauges.

Including Assorted Delapina Speedhone Mandrels. Shoe Mandrels. Stone Retainers, Adaptors & Wedges. Double Ended Plain Plug Gauges. Mounted Points.

Including Mandrels, Resin Grinding Wheels, Backing Plates, Flanges & Hubs. ER Collets, Spanners. Assorted Grinding Wheel Spares.

Including Hand Tools, Grinding Wheels, Adaptors & Backing Plates.

2-Drawer Single Door Worktable with Assorted Centres & Hexagon Keys. Adjustable Louvre Rack with Plastic Bins.

Dimensions Approx 1,850mm x 600mm x 2,000mm.

Dimensions Approx 1,200mm x 600mm x 1,400mm.

Dimensions Approx 820mm x 1,440mm x 1,100mm

Dimensions Approx 910mm x 510mm x 900mm.

Dimensions Approx 1,800mm x 600mm x 1,800mm.

Comprising: (1) 2 Drawer, Single Door & (1) Single Door.

Including Plastic Storage Bins & Assorted Tooling.

Dimensions Approx 1,230mm x 800mm x 900mm.

Dimensions Approx 1,230mm x 800mm x 900mm.

Includes Machine Bed Clamping Aids, ER Collets, Soft Jaws, Arbors, Indexable Carbide Inserts & Holders.

Includes Grinding Wheels.

Dimensions Approx 730mm x 530mm x 1,060mm.

Dimensions Approx 1,800mm x 600mm x 1,800mm.

Dimensions Approx 910mm x 510mm x 900mm.

Dimensions Approx 910mm x 510mm x 900mm.

Dimensions Approx 910mm x 510mm x 900mm.

Dimensions Approx 910mm x 510mm x 900mm.

Dimensions Approx 1,800mm x 600mm x 1,800mm.

Including Holex Assembly Pot.

Dimensions Approx 910mm x 510mm x 900mm.

Dimensions Approx 2,120mm x 610mm x 1,990mm.

Including Assorted Fixtures & Grinding Wheel.

Dimensions Approx 1,155mm x 700mm x 900mm.

Including Assorted Hexagon Keys. Dimensions Approx 1,155mm x 700mm x 900mm.

Dimensions Approx 620mm x 620mm x 870mm.

Dimensions of Each Approx 2,830mm x 600mm x 2,000mm.

Dimensions Approx 1,830mm x 920mm x 1,690mm.

Comprising: (1) 1,870mm x 600mm x 2,000mm. (1) 2,810mm x 600mm x 2,000mm. (1) 1,900mm x 585mm x 2,000mm. (1) 2,870mm x 600mm x 2,000mm.

Dimensions Approx 910mm x 510mm x 900mm.

Dimensions Approx 1,250mm x 795mm x 900mm.

Dimensions Approx 1,800mm x 900mm x 860mm.